Fast Eddy Week 4 So ive been doing LST to get better light coverage and intensity on all parts of the plant :) this one was very small and bushy which made it hard to get all leaves a place to sit comfortably... ive also been watering using less water but watering more often to get oxygen to the roots :) these autoflowers dont care what i throw at them. fast eddy is alot smaller than my quick one plant but has a nice veg smell from the cheese x juanita the tearful. cant wait to get into heavy flowering! Finally im hoping to get 20-25g off this plant. and as its medical weed im really excited to try this. if it works then goodbye high thc strains! Thanks for following my diary :) it means alot! happy growing people!

Flowering phase

Started with the LST. The idea is to not top them, just do LST. This week I'll probably start making my SCROG net and start tucking.

Explosion of leaves from the 15th to the 17th day, then on the 18th day we start to see "normal" leaves, and on the 20-21st day we have hope that it will become a normal plant 😄

Hidratamos por 24 hrs y pasamos a papel para continuar con la germinación.

leaves

Evening all...back on it AGAIN!!!! Worst is, in the middle of a heat wave (Hottest day every recorded in this part of the world a couple of days in a row!!!)...still need to finish trimming my last crop!!! :'( Will get that done over the next couple of days as these girls need rehoused!!! So, got a cloner at the start of the year...was planning on clone a spare wedding cake I had but that sort of went to pot and life got in the way and that didn't happen. As I also got a hold of an Ultrasonic Mist Generator, I thought I'd give this "Fogponics" Germination thing a go!!! Seeing as @Sweet_Seeds donated a few Magical Beans to my cause, I thought I'd give their genetics a whirl. The Red Hot cookies looked too cool to pass up on!!! So, got the beans popped on the 12th of July and by the Thursday, they were showing their wee heads. One though was also showing its wee tail - I hadn't buried it enough and it popped itself out of the Jiffy Coir plug I started them in. I did get it reburied and it has started growing but you can see its the runt in the pic...intend on keeping this one as a cloner (And will give the cloning a fair whack this time!!!). Since I was worried that the one that popped the soil was going to be impacted, I dropped a 3rd bean and true to form, it was out of the root riot in 4 days also. Got them into the 'fogponics' machine and let them rip (Under 2x11W T5 Sunblaster 6400/k's and a Amazon Special LED light for extra Spectrum) and they seem to be coming on grand. Noticed some yellow spots on the leaves and in 2 minds if it was: A. calcium (As starter plugs are Coir and I didn't put calmag in the plug hydration mix - Jiffy Original plugs are supposed to be buffered for this!!!); B. if I should have broken and washed them out of the Coir and put them into straight Hydroton (The fog could have been saturating the Coir and choking the internal roots a bit) or C. if its just the abusive heat we've been having here (In a country where A/C is basically unheard off as heat doesn't exist outside!!! 😋). Roots are ripping out of the net pots now so they're about as ready for transplant as can be...just wanna give a day or 2 more to see if the heat here settles as I can't adequately cool the area they're going too - but then again, under LED so heat may be good as it doesn't heat the leaf surface up as much! Plus I have a couple of plants to trim...still hanging in their humidor tent when is needed again for growing! Think this will also be the retirement party for the Wilma. Going to build an Undercurrent Fallponics system when this run is done (Wont have time to get it setup before these girls need forever homes!!!). Have the crates bought and a bit of research done on how to DIY a build so hopefully this turns out to be a decent run. Also have a few people with building experience on hand to give advice. Since last grow: Lights have been upgraded to a Geekbeast 630W Pro LED (3500K Spectrum - UV 385nm and Far Red 730nm built in [won't use the 730's as they can't be run independent of the Main Lights...be wary of this if you buy one off Alibaba for the 730's built in!!!] - Will run the 385UV's though throughout the grow for more blue...will run then 3 hours after lights on to until 3hours before lights off). Also procured an InvisibleSun LED 730nm Flower Initiator (Will use this for EOD Far Red treatment to try a 13/11 flower cycle) and a Migro UVB310 fixture - For the Trikes!!! 😝. Have a Haliea 300A winging its way to me as we speak. Have some Non-Stick Micro-tips flying in from the Grand old US of A a will to get a better, more consistent yield. Think thats about all I have for now...Happy Growing all!!! 💪

Week 9 looking good getting ready to chop down both lsd25s the big bud and cherry cola still have time to thicken up for sure

I think they are closer to done than I previously thought. All clear on trichomes though. Two more weeks?

Easy grow not a huge yielder but there were circumstances to deal with here so very happy Both plants finished up in the 200 gram range so good grow Get it enjoy it

Change pot4to 7gl Looking good 😊☺️☺️ Have big fan leaf

So, I start the harvest last week, but didn't get time to post here, first were the top bud, and this week I got the rest of the plant, it is a good strategy as the lower buds could develop a little more! Amazing growth! I am very happy with the wield, it was my 3 growth at all and my first LST! Great results! Thank you all for the support! Now I will stop for 3 months, going to Africa for a little bit! :-)

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies growing well, and healthy, Shame on me, didn't have time to transplant this week, I was so busy.. 🤦‍♂️🤦‍♂️ Roots are out of plug, except it, all is good 👍 We'll start grow nutes next week and put in pot 😊 💧 Give water 2x per day, keep soil wet with vaporisator. Water + Rhizo PH @6 💡Mars Hydro - FC 3000 50% Not yet under Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering

Week 3 Great Pistil growth looking forward to day 21 defoliation This one looks really good love the stretch it’s not getting to lanky I’m seeing really fast growth The New. Check out my other Dairies (Gelato Cake& Jungle Verde) Nutrients (floraflex) are in Grams/gal* Light: HLG Follow my IG @therealterpio for more updates & content!

The gnats are pretty much gone but I saw one today sadly. We pruned them on the bottoms to give more room to grow. Next grow I hope to do it sooner. We are going to be starting nutrients back up on Monday which will be exciting.

Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 Finally got that transpant done. Added a bit of root juice to help out the transplant. Won't be adding nutes until next week, directly bloom nutes.. Took waaaay to long to transplant. They didn't get any growth becuase of the bad weather these past weeks. Very bummed out about that. Two of the are already in prefower.. the tiniest i hope grows a bit more.. can't really ask for much more given the bad weather and that they're autos.. I'll for sure be doing a re run with this strain with better stable conditions. Take care out there! One love!

Didn't have too many pictures before the flip, the other plant in the tent was being wild and stretchy. Still making good growth but is still kinda small.

GUSH MINTZ