All Looking good were almost there to the finish line 2 to 3 more weeks and we're done

Hey peeps! I have now started lowering the nutrients and the PPM is 1200 on average but I intend on lowering it in the next couple of days in order to start flushing her later next week. She keeps popping out bud sites all over the bottom even though we did trim her in the first couple weeks. I have decided that, when I do harveserst her, i'm going to harveerst her in three stages to maximise the yeild and get that light to the lower small bud sites over the next couple of weeks. Let me know what you think!

13th - Checked the power usage data from the AC unit and the Smart logs: around the time heat stress on #1 occurred the AC barely turned on. New zigbee sensor is working well it seems! CO2 tank is almost completely empty. I lost a fair bit from a few incidents I suppose, maybe a lot more than I thought!?.. ..want to look into stopping CO2 when AC is running with smart power switch and app. 14th - CO2 tank depleted. Setup smart plug on CO2 regulator, works fairly well. Occasionally stays on for a bit more than it should, but then self corrects. I can take that as an improvement.. 15th 16th - Replenished water tank - TDS 650 , gave both a good soak, runoff was 1200 initially and eventually down to 800. 17th - Concerned about density - have clipped several sappy buds growing into already thick areas - hoping to improve ventilation within the canopy. Rotated the pots a bit and adjusted the tie downs.

Bueno ya empezamos ahora a sumar semanas y ver el gran resultado de este gran banco

This is my first grow. I needed something very stealthy so I'm growing in a 16" x 9" x 36" cabinet. - Simple hydroponic system. Basin filled with about .75 gallon, small air pump and air stone. - LED is 216watts (UFO full spectrum) - Wifi outlets for control and timer on fans and LED. Also have camera so I can always have eyes inside. - Crop King Seeds - Autoflowers - White Widow and Northern Lights. Read that these are good for beginners and smell isn't as strong as others. - Germinated using paper towel method. Soaked 18 hours, after 3 days put taproot down in soaked (spring water) jiffy pellet. Kept dark for 48 hours. - After sprout, began 18/6 light schedule. No nutes for first week. - Per instructions from the cabinet maker, I mixed 1 tsp of Maxigro in 1 gallon of water. After 1 week, I added 1/8 cup of this solution into the basin with .75 gallons of water. (Seems like a very small amount of nutes, but said go slow). -PPMs are stable ~400 since feeding started. -Added 1/2 cO2 pellet during week 3. -pH was high during first week (as high as 8.3) but have been controlling with GH pH down since. Avg 6.1. -Roots look healthy. Changing water in basin once a week. Using syphon to drain. - Started LST. NL has been growing faster, was able to bend an expose to more light. Sorry, no photos for first 2 weeks (just found this site!)

Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself

Hi friends ,👳‍♂️👳‍♂️👳‍♂️👳‍♂️ fifteenth day after switching to flower phase. the flowers are strong. The flower responded very well to the transplanting. I bend the flower every 5 days. This will be a very beautiful harvest if nothing goes wrong. 🤗 Have a nice day and thank you for watching.💚

Another nice week of beautiful weather. Have been on total cruise control this week on a little water here and there. Did some topping and super cropping. Not much at all to report the fast buds are in full flower and doing well. Happy growing folks🤙🏻

She’s not drinking as much, so need to tone it down. Moving her to the center of the tent to finish up. Guessing 1-2 more weeks You def get a melon funk for sure— that’s rare with seeds/names lately. 🏻💚

Alles läuft gut Pflanzen sind prächtig entwickelt Robust und Gesund werde nächste Woche die Blütephase einleiten.

Week 8, nov 3. the middle plant was turning light green in the past couple of weeks so I flushed it with 60 liters of ph 5.9 water to see if it was locking out. Most of the plants have had calmag deficiencies even though I have been adding calmag every watering. perhaps I need some dolomite lime mixed in with the next promix to get a better ph and allow for nutrient uptake better (?)

Day 85 Add 5L water PH 5.5 - 5.7 EC 1.0 - 0.9 TDS 470 - 420 DLI/20h 39 PPFD 540 Water 21c Day 86 Add 5L nuts PH 5.3 - 5.8 EC 0.8 - 1.2 TDS 420 - 580 DLI/20h 39 PPFD 540 Water 21c Day 87 PH 6.0 EC 1.2 - TDS 590 - DLI/20h 39 PPFD 540 Water 21c Day 88 PH 5.6 EC 1.2 TDS 590 DLI/20h 39 PPFD 540 Water 21c Day 89 PH 5.6 EC 0.4 TDS 180 DLI/20h 39 PPFD 540 Day 90 PH 5.8 EC 0.2 TDS 80 DLI/20h 39 PPFD 540 Day 91 PH 6.0 EC 0.2 TDS 90

my best harvest to date 🙂 I got 196g dry and cured, of which 85g for the biggest one, the one with only 3 colas; no popcorn bud, and a good general density. A nice smell, not too strong, but it lasts a long time 😏 I took the 85g of the big one + 90g of leaves (from my numerous haircuts) for a second bubble hash experiment (see vid) this time I reached a ratio of 7.1%, so not huge, but so good and powerful 🤩

Jan 13th ordered a Dehumidifier today should be here Monday need to get the humidity down for flower I can only get it down to 57% so Hopefully it will work One of the amnesia haze plants have some type of deficiency not sure have brown spots on leaves Got humidity some decent control but I’m sure amnesia haze 1 is dealing with PH issues the PH meter is cheap and I’m sure it’s been off a bit so I’m going to look for new one this week

This was an easy and productive run. The 2 plants grew up in an overcrowded environment, and as a result, they did stretch a lot. Nodes were spaced but this wasn't a real issue since they both produced a decent weight. Fun/Strange fact: the TOPped one produced 77 grams and the FIMmed one produced 84 grams, very close results with two different methods. I took a clone of the FIMmed one, and it's already 50cm tall, almost ready to flower. The buds are compact and solid as a rock, the earthy taste is hard to describe but 100% unique and yummy. I'm totally in love with this strain!

the girls are now in my backyard, they are in a 1.5 x 1.2m terrace completely amended by @elcaudilloorganicproducts Pheno B Is still veg

🤯🤯🤯🤯

Moved the trellis higher to get some light in. Buds seem a little small. I think I flowered it too soon. Looks healthy. Smells sweat and creamy.

.