The nuggets are very sticky and compact, they are frosty as hell and the aroma is very strong already. I loved this strain. She's such an amazing autoflowering strain. Very powerful.

Little disappointed at the size after 3 weeks but just gonna let her do thin was gonna LST but not to sure now any recommendations out there feel free?? 🙃🧐PS HAPPY GROWING PEEPS

acho que ainda consegui produzir uns tricomas com as correções da água, mas como o estágio da floração já estava bem avançado, as folhas começaram a descolorir muito cedo, tive que colher 3 plantas precocemente, as outras 3 menos vou tentar seguir mais 2 semanas, não estão mostrando tricomas Ambar ainda!

The gap between where you are and where you want to be is measured in decisions, not dreams. Dopamine release is not the pursuit of happiness; it's the happiness of the pursuit. "Mens Dei" Cannabis buds can expand or swell in warmer conditions, but this is not necessarily a desirable effect. High temperatures can cause the buds to become airy and loose, reducing their density and potentially impacting potency and aroma. First 4 weeks flower, blazing hot expansion of buds, 4 weeks after cool off? Why?? What can be made to expand, airy and loose, can also be made to contract, dense and tight. Why? Trichomes do not discriminate, although we like to think of trichomes' primary purpose as being to get us high; they are there to provide photoprotection (sunscreen). Trichomes apply themselves based on area dimensions; the more area = the more trichomes in order to protect. Different from density: Trichomes, the resinous glands on plants, are often produced in response to stress, including high light intensity. This increased production can lead to denser trichome coverage on the plant, stress, stress, stress, stress is the signal. There is a certain beauty in watching the large water-filled buds once swollen to the brim slowly shrink during drying, as the surface areas contract, the trichomes just cluster up to form denser and denser coatings, already dense from high light intensities, UVB exposure, and IPS, and every other stressor I could tweak. Trichomes, the resinous glands on cannabis plants, are often produced in response to various forms of stress. These stresses can be environmental, like excess light(HIL) or UV-B radiation, temperature fluctuations, or drought, or mechanical, such as wind, pruning, or even the weight of the plant's own buds. The plant reacts to these stressors by increasing trichome production as a defensive mechanism to protect itself and its valuable compounds like THC and CBD. In essence, cannabis plants perceive stress as a threat and respond by producing more trichomes as a way to protect themselves and their valuable compounds. Several studies have shown this. Not so much a "master" grower as a master of stress. Psssst. Tip. Trichomes fill with "antioxidants," including THC. Ant"ox"idants, The production of antioxidants in plants is intricately linked to their oxidative apparatus. The plant has limited oxidative capacity/apparatus. During daytime photosynthesis, a large percentage of that oxidative capacity is tied up in protecting the plant. During the night, plants alter their metabolic pathways. This leads to a far more focused production of specific antioxidants, like THC. Plants also produce antioxidants during the day. Excess light, for example, can trigger the production of excess antioxidants as part of their defense mechanisms against reactive oxygen species (ROS). The differential ROS production by blue and IR light can have significant biological consequences. For example, high levels of ROS induced by blue light can lead to cell damage and death, while lower levels of ROS produced by IR light may be involved in beneficial cellular signaling pathways. Long nights under the IR (very low ROS), the boost in cellular respiration, and the boost in energy production. In a perfect world, I'd give the plant a shock treatment of 60DLI in 4 hours and give her the other 20 hours to perform cellular respiration under IR. The stress of those 4 hours would be rigorous and full of stress abound, 1800-2000ppm CO2 is easy for a couple of hours during daylight, it's maintaining it that's hard, but 4 hours is very doable with nothing but a little extra "carbon sugar" in your medium every other night during the first 4 weeks of flower. In my opinion, you only need to jack CO2 for those first 4 weeks of flower to see maximal output, after that it's all about trichome preservation, everything else comes second. Without the temps to assist with metabolism, CO2 is reduced to normal levels along with temps 4-5th week of flower. Buds are primarily composed of water. Developing flower buds, like other plant tissues, require a significant amount of water for growth and turgor pressure, which helps maintain their structure and firmness. Turgor pressure in plant cells is primarily generated by osmosis, but transpiration plays a crucial role in maintaining it. The optimal internal leaf surface temperature for photosynthesis at 1800-2000ppm CO2 is likely in the upper range of 97°F, meaning ambient would need to sit at 102°F-ish or thereabout for full metabolic utilization. That's putting your transpirational pulling force x5 x6 maybe x7 of what it would be if she were cruising at 68F. "My buds won't fatten, what can I do!!" Crank that bitch. If your purpose was to blow up a balloon as fast as you can, as much as you can, would you use 2x force or x5 Force to do so? Bad analogy, but you get the idea. Kiss. Optimize photosynthesis & VPD by day, cellular respiration by night. TECHNICALLY: "While transpiration and cellular respiration are both ongoing plant processes, they are not neatly separated into day and night. Both processes occur both day and night, though at different rates and with different emphasis. Transpiration, the release of water vapor from plant surfaces, is primarily driven by sunlight and photosynthesis during the day, but it also continues at a lower rate at night. Cellular respiration, which provides energy for the plant, occurs continuously, both day and night. " BUT Only 10% ATP can be processed through photosynthesis and carbon capture. 90% of ATP is processed when the plant's oxidative capacity becomes available (NIGHTTIME). Cellular respiration relies on the process of oxidation to generate energy. Specifically, the final stage of cellular respiration, called oxidative phosphorylation, utilizes oxygen as the final electron acceptor to produce a substantial amount of ATP, the cell's primary energy currency. Several environmental factors can hinder cellular respiration in plants. These include low oxygen levels, temperature extremes (both too high and too low), humidity, water stress, and the presence of toxins. These factors can impair the function of enzymes involved in respiration, disrupt the availability of substrates, or directly damage plant tissues, thus reducing the rate of cellular respiration. Factors such as oxygen concentration, glucose availability and temperature will all impact the amount of aerobic respiration an organism will perform. See you next grow, *twiddles thumbs* Signum Magnum. Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim Cantáte dómino cánticum novum Quia mirabília fecit Gloria pátri, et filio, et spirítui sáncto Sicut érat in princípio, et nunc, et semper Et in saécula saeculórum, amen Signum magnum Appáruit in caelo Múlier amícta sole Et luna sub pédibus ejus Et in cápite ejus Coróna stellárum duódecim

~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/8- Well here we go into the first week of Veg for the Zkittlez Auto from Seedsman Seeds! I have her nestled in between a bunch of other autoflowers that are one month old now so she's got lots of company! Since sprouting the Zkittlez has bee doing exceptional, with good color and vigor. I was a little concerned about her when she first sprouted as her first leaf set had a funky color to them and I feared that she wouldn't survive. But low and behold, when she opened up her leaves they turned a beautiful green and she's been looking healthy ever since! Today I gave her her first water/feed with 20oz of well water with a base ppm of 100, to which was added the following Dutch Pro nutrients: Grow 'A' & 'B' @ 10ml/g, Multi Total @ 7.6 ml/g, Take Root @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g. After adding the nutrients I ph'd the solution to 6.1 @ 74℉ 11/10- The Zkittlez is doing really well in her little Popcorn Bucket! I didn't water her today, but will wait until tomorrow to avoid over watering her. 11/12- Yesterday I went ahead and watered/fed the Zkittlez with 20oz of well water with a base ppm of 100, to which was added the following Dutch Pro nutrients: Grow 'A' & 'B' @ 10ml/g, Multi Total @ 7.6 ml/g, Take Root @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g. After adding the nutrients I ph'd the solution to 6.0 @ 75℉. The Zkittlez Auto is doing great, has good color, vigor and already has her third leaf set emerging! 11/14- Today when I checked her pot the Zkittlez auto was still pretty moist so I'll be waiting until tomorrow to water/feed her. The Zkittlez Auto is doing fantastic without any visible health issues, has good color and now has her third leaf set almost fully emerged! Well it's been a fun week watching this little girl grow and the coming weeks promise to be more exciting as they pass and she gets her groove on! See you next week! 😎❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! 💚What you grow - Grow what you💚

What can I say about this one. It has exploded 😆 the plant is so healthy and strong she has reached for the lights. Leaves turned upwards, beautiful lush green and a nice shape. I cannot wait to see her fully grown, this has a lot of promise for good things to come.

Week 2

Hello Growmies, The first week of flowering has wrapped up, and I'm pleased to report that she's stretched evenly through the ScrOG. I've been doing some light defoliation where leaves were overshadowing other shoots. She's showing a clear preference for a pH below 6. Anytime it creeps above that, the plant begins to experience nutrient lockout. I'm keeping a close eye on this and will adjust the pH as necessary. Her root system is expanding robustly, gearing up for increased growth above ground. To support this, I've upped the dosage of Orca along with the boost accelerator. Here's a bonus for you all: enter the code ZAMMIGD2023 at checkout in Zamnesia's online store for a 20% discount. Thanks for stopping by, and stay tuned for more updates next week!

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...

Few more weeks to go, strong terps, good tricome production now, good spred for colas

I attempted some LST and defoliating over the last couple of days. I wasn't overly confident as it was my first time so I decided to take a different approach with each plant so hopefully I don't mess them all up haha

Day#29Update : I took off about 8-10 fan leaves although I really did not want to take anything . I pony-tailed her main top although I wanted to pony-tail each of her tops . I’m hoping this second lite defoliation establishes those lateral branches letting them become symmetrical with the main top . If this happens I’ll pony-tail each branch for a day or two then when I untie them I’ll top each branch . For now that’s the plan , make as many arms “branches” with equal growth to the central “main” branch . Day#30 update : she’s been ponytailed for an entire 24hrs which is a 1st she always breaks out of the tie . This makes me happy I timed it better . Usually I ponytail her top when it’s slightly to large/strong so the benefits are short lived at most about 8hrs which still definitely helped those lateral branches reach the light but I was aiming to ponytail her at a smaller growth so that it would remain restrained until I decided to remove it . She’s almost ready for a drink . She could go for one today but I really want to wait until she’s absolutely famished and begging for it . So I’m going to wait another day or two then water her until runoff . The last time she received water was day #24. Day#31Update: well she’s still pony-tailed ! I’m shocked and amused . I’ll let her down finally tomorrow . Made it through an entire month she’s only gotten more beautiful since fixing the VPD issue. I broke and gave her water before she was absolutely begging for it . Mainly to address the low and falling humidity in my tent . I don’t want to lose anymore precious time dealing with issues and setback on those autos finishing up in here . After I last watered the tent day #24 I did a massive leaf defoliation of the flowering girls which dropped the overall tent humidity massively . So I adjusted the intake/exhaust fans as well as the oscillating fan to allow the humidity to rise in the tent . That worked well enough until but as the girls drink slowly the humidity is back falling again into the 45s. I don’t want it in the 40s until buds are swollen . I mixed up a gallon on water and added an ounce of trace micronutrients to it and ph’d it down to 6.4 loaded it into a 1gallon sprayer & sprayed my 3 autos . Having a little less than 1/4 gallon of this full strength solution I decided to see what my Cereal milk plant was made of and gave it to her . I haven’t given any of these girls a full strength dose of anything other than the Gaia Green . At day 42 & Day 35 of the autos in flower I did a too dress of flower nutes & a week later all 3 ladies showed burnt tips so I very well may exacerbate the issue by giving them a full stenches feeding of micronutrients . “Cellie” who went into this 1 gallon pot day#9 is showing what looks hunger signs with the yellowing of the lower leaves . Maybe because I’m letting her go thristy considering there should be 28 days of food in this medium at minimum really even more considering I added more than the recommended amount . So we’ll see. Month 1 Veg went great excited to see what kind of bush she looks like at the end of month 2 and fingers crossed by month 3 she’ll be read to flip to flower and scrog down Day#32 Update: RELEASE FROM PONYTAIL PRISON so to speak 😭. She has so many tops already ! It’s going to be a pleasure and a joy to defoliate her , ponytail all her tops for a couple days , then release the ponytails & top all the main tops once to widen her up some more ! She hasn’t shown signs of stress from that full strength micronutrient feeding I gave her last night so that’s wonderful . She’s going to look absolutely crazy when I strip her bare of a lot of these leaves and ponytail those tops BUT the woman she will be once she fills back out will be worth the temporary tragedy . It will take her relatively 14 days to rebound from the defoliation I’m going to put on her if I go as heavy as I’m planning to .

ok so everything has gone fantastic , no nutrient burns at all , and have been slowly creeping up the base nutrients , i have stopped the cal mag and now adding house and gardens bud XL at full strength these girls are now in full swing of flower and i bought a new ph stick this week , i have found when PHing the feed bucket that its best too have air stones in the bucket , add all nuts and then ph but do not use the feed that day as if you check the next day the ph is off again so i left it 24 hours after i add more ph down , and it seems too make the measurements alot easier and stable , i have bent down the main stems " without damaging them onto my netting too A keep the canopy all the same high so my lighting is covering all plants at the same distance and also it allowed the side stems too reach up too , the zkittlez did stay alot shorter and compact compared too the rest , but she has had the shame conditions than the rest , so she much just be a shorter pheno type i also was sponsored another new led light by kingbo this week so have added another 600watt led too the grow , so now have two 600's and one 900watt , and temps are still fine sitting at 24c lights on and 19-20 off , so am pleased with that , this lady stayed very short and compact and didn't really stretch much at all and it by far the smallest plant of the bunch ,

Start of week 6 day 36 of flowering. So considering this is a summer grow with high temps most of the time, these girls are still blooming nicely. LIT farms are still continuing to impress as the weeks go by. Very frosty and still 3 weeks to go. Pk stopped and buddy back in the schedule for this week. Finale next week only and then 1 final week of just water.

Hello growers! flowering is doing good, healthy and tough. cheers!

These 6 monsters are already my favorite specimens in the garden. The growth in the coco/perlite hempy's is astounding, right up there with DWC. Many of these girls have outgrown their mother which resides in 5 gallons of soilless. F11 and all is good. Environment on point, smell in check, and visiting the garden only 3 times a week. Stay tuned for some monster nuggies!!!

9week flowering

NITRO HAZE #BIGGER:STRONGER:FASTER #OUTDOORGANG Ah sido una muy buena semana, aunque veo un crecimiento lento. Cabe decir que estamos acá próximos a entrar a invierno y quizás mucha agua no deja expander raíces. Esperando todo mejore y siga excelente 27 de mayo LUPITA GUARDIANA DE MIS PLANTAA Se ve crecimiento en sus hojas pero no en su tamaño, espero esta semana hacer un riego de Micorizas-Wonderland. Va super sana sin rasgos de pestes ni de bichos. D53 Lento crecimiento pero debe ser que hay muy baja temperatura y mucha humedad de noche y eso mantiene la tierra muy humeda sin necesidad de riego. D54 30 mayo Aplico jabon potasico porque vi unas arañas rojas y normalmente tenia mariposas blancas pequeñas (Mathania leucothea), espero funcione. Aplicare dos veces mas durante la vegetacion.

I have little to add that I haven't already said. These plants in particular grew from start to finish in 0.50l pots, produced nearly a pound of wet grass and about 30 dry grass overall. Not much, but it was as I expected, the smaller the pot, the lower the yield.