Es ist soweit! Am Freitag habe ich die fünf Easy Buds nach knapp 11 1/2 Wochen abgeschnitten und geerntet. Leider musste ich feststellen, dass eine Pflanze ziemlich stark befallen war. Ich vermute eine Milbenart oder möglicherweise Fliegeneier. Unterhalb der Blätter waren etliche dunkelgelbe und dunkelbraune Eier, die man auf den ersten Blick kaum erkennen konnte. Bei genauerem Hinsehen sieht man jedoch, dass sich der Befall auf die ganze Pflanze ausgeweitet hatte. Glücklicherweise blieben die vier anderen Pflanzen verschont. Aus diesem Grund trockne ich die Pflanzen auch getrennt voneinander. Die befallene Pflanze wollte ich nicht direkt wegwerfen, sondern erstmal trocknen lassen. Im Nachhinein werde ich schauen, wie ich mögliche Schadensbegrenzung betreiben kann. Die vier gesunden Pflanzen werden in einem geschlossenen Zelt in einem Trocknungsbeutel getrocknet. Die befallene Pflanze habe ich in dem Folienzelt aufgehängt und mit einer Plane abgedeckt. Nach wenigen Tagen der Trocknung sieht soweit eigentlich alles gut aus. Die Eier scheinen nicht mehr zu schlüpfen, sondern fallen von der Blüte ab oder verschrumpeln zu Kompost. Ich hoffe, dass es dabei bleibt. Der Geruch hat sich nach dem Abschneiden deutlich verändert. Schon nach der kurzen Trocknungszeit kann ich einen intensiveren Geruch feststellen, der sich noch nicht so richtig beschreiben lässt. Die Blüten waren stark mit den sogenannten "Sugar Leaves" verwachsen, weshalb ich sie grob getrimmt habe, um sie zum Trocknen aufzuhängen. Nachdem die Blüten vollständig getrocknet sind, werde ich die Buds noch einmal einzeln trimmen und durch meine Trimm-Maschine von Vevor jagen. Der Ernteprozess hat zu zweit circa eine Stunde gedauert. Die Pflanzen waren zum Zeitpunkt der Ernte noch sehr gesund und kräftig. Die Verwurzelung war trotz des geschlossenen Topfes sehr gut. Die schönste Bud hat definitiv die zentrale Pflanze, Greta, ergeben. Nass hätte ich den Bud auf mindestens 12 g geschätzt. Ein Gesamtgewicht des nassen Pflanzenmaterials habe ich nicht ermittelt. Sobald alles trocken und fertig beschnitten ist, werde ich das Tagebuch um den trockenen Betrag ergänzen. Stand jetzt würde ich schätzen, dass der Ertrag aller Pflanzen bei circa 40-50 g liegt, was mich für meinen ersten Grow ziemlich zufrieden stellt, besonders in Anbetracht dieser wirklich sehr simplen Strain. Mehr Infos und Fotos folgen in Kürze, wenn das Curing beginnt. Bis bald! :)

Excited see this strain develop their bud structures now. They are definitely a lot hungrier this week and seem to showing a ton more trichomes. More defoliation and lst to help spread airflow and light. Still no major issues. ✌️

she's a hungry lady and can take a good amount of nutes

Plant did ok, not the best result and far below my expectations for it. I found that growing them in pots with other plant is a no go from now on for autos. they just don't grow all that well when their root space is being shared, all my autos from a few breeders did poorly when I grew them like this. however the ones I kept in their own pot did much better, the Ganja farmer brand is good, just wish they had some CBD/CBG strains in their catalogue. This will all be for friends and family. @GanjaFarmerSeeds, If you like the images or videos I can send you raw files that have not been shrunk and contain no watermarks, if you feel I am in the top 3 of your BDOTY Contest that is :D

04/01 (M) As stated in previous update from last week (SEE week 25 update 04/01 (M) ) - Since has been fed accordingly and rebounding accordingly. 04/01 (C) Same as above for the babies (SEE week 25 update 04/01 (M) ) - They are rebounding accordingly as well - Never get to comfortable and execution are key - 04/08 - (M) - The Mom has bounced back nicely - The nutrient feed had to be increased to supplement for when the feeder malfunctioned - Her dead leaves will be pruned this week to prep for budding. 04/08 - (C) - The babies bounced back nicely as well from the EC/PPM/PH burn - Most of their has come back and numbers are optimal thus far.

11/13/2018 Not sure what the problem is but I lost all data this week?.

I’ve got some curling going on. Have been trying to get temp humidity stable so I got a humidity controller and now run lights on timer 6 hrs off. Also my humidity gauge I used to set in the middle of the tent but I now put directly in the pot behind the plant and different readings. It’s one of those cheap humidity temp gauges that comes with led lights. Just need to get this curling thing down. 1 of the plants shows no curl so maybe it’s the fox farm soil is too hot. Or maybe that 1plant got better plant coverage, I’ve since adjusted the fan and may get another one.

4/20: I have 3 good clones of the shortie growing, and another FFT6 seedling. 5/1: The seedling is now in a 5 gallon pot outdoors, and 2 of the clones are in my closet getting ready to be transplanted into 5 gallon pots and moved outdoors. One of the FFT6 clones will be grown in my tiny tent. 5/6: I took the last two clones outdoors and fed them really well. I also did some training on the seedling and the clone in my tiny tent. 5/7: I did a foliar application of Axiom Harpin proteins today. 5/9-5/11: Did foliar feeding and lots of training every day. 5/12 - 5/17: Fed the outdoor girls on the 13th, then we had lots of rain all week. The seedling is a beast. Installed a new 200w 3000k waterproof LED over the outdoor plants. The indoor clone looks great. I gave her some water on the 16th. 5/18 - 5/19: The seedling and two clones outdoors are all flowering?!?! I suppose it's because I germ'd and vegged them for a month under 24/0 before taking them outdoors under 14/10 of daylight... I'm really hoping she sees the days getting longer and goes back to vegging. I need time to bush her up really well! I ordered another 200w 3000k waterproof LED to replace the two cool white 60w LED's, so that will be 550w total watts of lighting outdoors in addition to the 5'ish hours of direct sunlight they get at mid-day, and the tree-diffused sunlight they get for the rest of the day. Thinking about trying a product called Bud Bomb...has lots of hormones, cytokinins, and auxins that when applied at the beginning of flowering supposedly causes more lateral branching and less vertical stretch. As it is, I'm spending too much time training her and the other outdoor plants to stay below the eyeline of nosy neighbors, so I'm really considering giving it a shot... 5/20: I went for it and sprayed them with Bud Bomb this morning...hope it works like they claim.. 5/21 - 7/4: The clone i grew in the tiny tent got to move in under the quantum boards for her last 2 weeks and fattened up nicely. I harvested her on 6/28 and washed her buds, then jarred and weighed her on 7/3. She produced 110g of cola and 51g of lower bud...very little of it was larfy.👍 After a few great weeks flowering outdoors, i was invaded by spider mites and grasshoppers. The #6 seed-grown plant didn't make it, but i brought the #6 clone indoors and treated her for spider mites a few times, along with the 2 x #1 clones and the #7 plant. That outdoor clone now in my closet is still flowering as of 7/4, but had her last dose of nutes on 7/3. Flushing in a few days.

Day 93 01/10/24 Tuesday De-chlorinated tap water pH 6 only today. Day 95 03/10/24 Thursday De-chlorinated tap water pH 6 only today. Day 96 04/10/24 Friday De-chlorinated tap water pH 6 only today. Picture and video update 😎 Day 98 06/10/24 Sunday (End of week) De-chlorinated tap water with Plagron PK13-14 to just help with nutrients.

Hello everyone 😎 Week 9 of flower for the Gorilla Cookies auto from Fast Buds 💥🍪 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds & Green sensation 1ml/L from Plagron Weight is coming 🦍 Now only plain water💧all the top buds are ready for harvest Amazing smell of citrus & nuts🍋🌰 Spider Farmer SE-7000 100% Have a nice day 😋

70-77

Day 64 - Started off week 10 with 2 gallons of water and nutes today. I’ll be chopping my Cherry Cookies in about 2 weeks so she’ll have a little more room in the tent to stretch and get some light. She’s fine right now but a little cramped. Had a few of the lower leaves that were died off and just hanging on so removed them as well. Day 66 - Nothing much new going on today. Removed a few more dying fan leaves again. Gave her a bit more water than I normally do so she should be good for another couple days. She’s definitely budding up nicely and just waiting for her to really start frosting up. Day 67 - All looking good and coming along nicely. She’s budding up and just waiting for the frost to start. She’s gonna need some water and nutes tomorrow. Day 68 - Gave her 2 gallons of water and nutes today and she’s doing really well. Buds are forming nicely but still not seeing any trich development yet but I’m sure that’ll come soon enough. She is putting off a little bit of a smell right now and it’s almost like straight lemon. Not sure if that’s how this strain is supposed to smell but I’m liking it. She’ll have a bit more room to stretch out next weekend when I chop my Cherry Cookies. Day 69 - She’s still budding up nicely and hopefully this coming weekend she’ll be less constricted when I chop the Cherry Cookies. She’s drinking quite a bit and will probably need water and nutes again on Tuesday. Still not seeing much trich development so not sure what’s causing that but we’ll see what happens in the end. Day 70 - The end of week 10 today and looking through my jewelers loupe, I finally see some trichs starting to develop. So hopefully in the next week or so, I’ll be able to get a good smell coming from her. She’s going to be needing some water and nutes tomorrow.

Es war Zeit für die Ernte, im Urlaub hatte sich an der Pflanze im Folientunnel Schimmel an der Hauptcola gebildet und auch etwas an der Pflanze auf der Terrasse. Es hatte in dieser Woche sehr viel geregnet. die Pflanze wurde geschnitten und zum Trocknen aufgehängt.

It's been 28 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

Plants look,smell, and feel amazing. I think they've put on most of their weight now and the buds are starting to get really cloudy! I started the slightly older plant in the front on her flush at the end of this week. I believe the one in the back seems to be a week or 2 behind.

1 week, fast everything has germinated. Watering whiteout ph correction

All pictures are taken on day 22 We still have pretty cold nights here but she is doing great Neither windy days nor some insects trying to eat her leaves are gonna stop her

Hello This is the end of week 4 and the beginning of week 5 of flowering. The plant is doing well and I see the resin has started to flow. I can defiantly smell the sweet diesel off it. But it has fruity hints too. Could be strawberry. The plant has a bit of red on the stem and leaf stems... so we might see some color at harvest... We'll see... OK. Be Great. Chucky.