Start flowering, so curious about the next weeks, she already has a fine lemon smell

So far, she's doing great. I did a bit of defoliation, just 4 leaves removed, and she's moving right along. I'm expecting her to start pre-flowering within the next couple of weeks.

1 week of flowering done🌸 Plants have got a lot bigger and trimmed off some of the leaves that where blocking the light , they have filled out the tent nicely , still having 25ml of A and 25ml of B but going give just water the next two feeds give them a breather , been trying to look up if I should nute Feed at every feed or give them a break but all mixed information so decided just water ain't going to do any harm 💦 gorilla glue has started budding can't wait to see how she goes 😁 After OG Kush taking a bad turn and super cropped to hopefully bring some life back into her she has bounced back and bushing out nicely, hoping they all continue their progress for these final weeks! Back next week for another update , peace ✌️🏼

Day 50 some lower leafs going yellow I assume it is a cal mag deficiency so will be adding that into to the next feed

So far, she's doing great. I did a bit of defoliation, just 4 leaves removed, and she's moving right along. I'm expecting her to start pre-flowering within the next couple of weeks.

As of the afternoon of May 22nd, all plants except for the Seedsman White Widow Auto appear to be in flowering now. The Critical Jack Auto is 22" tall, the Industrial Plant CBD is 17" tall, the Ripley's OG is 16" tall, and the runt of the bunch is the Seedsman White Widow Auto at 11" tall. The plants are starting to develop their own unique smells. Continuing some LST and leaf-tucking as these plants continue to stretch as they start flowering. As of the morning of May 25th, I watered/fed all of the plants with Week 5 nutrients from Elite Garden at 1/4 strength. I also added CALiMAGic back into the feeding schedule because a few of the plants were showing some signs of deficiency on the bigger fan leaves. The White Widow plant is showing pre-flowers now and is starting to stretch a tiny bit. I don't know if I should start defoliating to open up more light to bud sights yet... how should I go about this?

As of the afternoon of May 22nd, all plants except for the Seedsman White Widow Auto appear to be in flowering now. The Critical Jack Auto is 22" tall, the Industrial Plant CBD is 17" tall, the Ripley's OG is 16" tall, and the runt of the bunch is the Seedsman White Widow Auto at 11" tall. The plants are starting to develop their own unique smells. Continuing some LST and leaf-tucking as these plants continue to stretch as they start flowering. As of the morning of May 25th, I watered/fed all of the plants with Week 5 nutrients from Elite Garden at 1/4 strength. I also added CALiMAGic back into the feeding schedule because a few of the plants were showing some signs of deficiency on the bigger fan leaves. The White Widow plant is showing pre-flowers now and is starting to stretch a tiny bit. I don't know if I should start defoliating to open up more light to bud sights yet... how should I go about this?

As of the afternoon of May 22nd, all plants except for the Seedsman White Widow Auto appear to be in flowering now. The Critical Jack Auto is 22" tall, the Industrial Plant CBD is 17" tall, the Ripley's OG is 16" tall, and the runt of the bunch is the Seedsman White Widow Auto at 11" tall. The plants are starting to develop their own unique smells. Continuing some LST and leaf-tucking as these plants continue to stretch as they start flowering. As of the morning of May 25th, I watered/fed all of the plants with Week 5 nutrients from Elite Garden at 1/4 strength. I also added CALiMAGic back into the feeding schedule because a few of the plants were showing some signs of deficiency on the bigger fan leaves. The White Widow plant is showing pre-flowers now and is starting to stretch a tiny bit. I don't know if I should start defoliating to open up more light to bud sights yet... how should I go about this?

Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w MH SuperPlant Super Blue 32000 Lumens (14000k) 600w HPS Philips Son-t Green Power 95000 Lumens Soil: Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing. In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 21] 3rd week ending , everything is OK , just some lil nut burns on some of them but it's better than having deficiencies in the early stage ... 5 fans leaves coming out on the 3rd node , I'll wait until the 5th node to see if they stop pre-Veg at 7 fans or if they go up to 9 fans leaves to end pre-Veg . -[Day 29] 5th week starting, got some good scalp. Flushing with Bud Flush to evacuate the salt , 10/12 plants are in healthy condition ( for the moment , keeping fingers crossed ) -[Day 30] Transplanted the baby's, added Invasion T (1g/plant), Monster X (2g/1l), Rhizoponics (0.4ml/1l), Humic Fulvic Booster (1ml/1l), Cannazym (2.5ml/1l), in water at pH 6.5, total ppm 898 -[Day 34] Finally transplanted into 5gal pot, the game is starting now ! Move on'up ! ( like Curtis says ) -[Day 35] Some plants start to have purpling stem, added Canna Mono MgO 1ml/1l for some of them -[Day 46] 11/12 plants in healthy condition, Y Griega is still recovering from Mag def and can't stand under too much light , putting back under the MH in a low Lux spot with the lil ones -[Day 48] Having issues with a medical strain Y Griega, after many diagnoses and checking the roots (in perfect condition) that plant has proper Mg deficiency ! I should have noticed the way that she had grown compared to the others, with massive leaves , and I should have trust MedicalSeeds when they says that plant grow like a monster , I would have anticipated with adding Mg sooner ! -[Day 49] Starting the Scrogging

As of the afternoon of May 22nd, all plants except for the Seedsman White Widow Auto appear to be in flowering now. The Critical Jack Auto is 22" tall, the Industrial Plant CBD is 17" tall, the Ripley's OG is 16" tall, and the runt of the bunch is the Seedsman White Widow Auto at 11" tall. The plants are starting to develop their own unique smells. Continuing some LST and leaf-tucking as these plants continue to stretch as they start flowering. As of the morning of May 25th, I watered/fed all of the plants with Week 5 nutrients from Elite Garden at 1/4 strength. I also added CALiMAGic back into the feeding schedule because a few of the plants were showing some signs of deficiency on the bigger fan leaves. The White Widow plant is showing pre-flowers now and is starting to stretch a tiny bit. I don't know if I should start defoliating to open up more light to bud sights yet... how should I go about this?

Day 16 from germination, transplanted and moved to a tent. https://youtu.be/HVExVEsFcyI

Day 46 transplanted into 5gal (20l) pots

ok guys so this week i decided to do a video update since we are about to go into flower this coming week. Her growth has been nice and she is really bushing out. check out the video for the Update info

Started bloom feed today going to faze out the grow nutes on the next watering moved them All about in ths tent turned the pots now again i will be adding another fan soon as think it might help with air flow as next week goes by im gonna nip a bit of the bottoms of the girls to thin them out so all the top buds get maxium yield

ok guys so its day 42 for the FastBuds CBD strain and she is growing just great! i decided to do a video update since we are starting to begin Flower but she is still stretching. check out the Video for more info!

Day 16 from germination, transplanted and moved to a tent. https://youtu.be/HVExVEsFcyI

64 days since switched to 12/12.Time passed really quick. I decided to keep these for 1 more week since they just bloomed for one more time.Trichomes are showing mostly cloudy with a little clear left.Looking for %90 cloudy %10 amber.Hopefully will get it this week.Size of the buds are getting bigger everyday.Buds are really dense and smelly .Expecting to harvest on friday.Plant will spend his last 24 hours in complete darkness and will be cut down before light come up.I will flush on last watering.Hoping for it to be enough.Since l have to dry in the room that i grow,i will cut them all at the same time.

Day 37 Veg going to transplant in next few days into 5gal pots Day 39 Day 42 everything looking great

Hi Guys, Week 17. I think F2 is almost ready for harvest. I got some deficiencies on some of the leaves. WIll Upload photos when its time for her to wake up. I am scared that it might be light leaks due to the new 6 in fan I added for air out flow cause to temp is too high for flowering. The problem is the ducting. I used some cheap ducting that came as a package from my Phresh carbon filter... BE SURE TO CHECK FOR LIGHT LEAKS ON DUCTING and not just the grow area and the appliance lights. Will add more later. 9th June update: F2 is ready to be taken down. WIll Flush today and let it dry out for two or three days then its harvest time. QUESTION: How to tell if nutrients are flushed. Leaf color/Deficiencies right before harvesting. For my two plants in this grow. F1 - Healthy dark green color leaves, which was bigger and taller due to the early transplant to larger pot Mid Veg. I flushed a few days before harvest and almost all the leaves were healthy looking and dark green. F2 - A lot of thin dried and yellowish brown leaves that look like a lot of different deficiencies, which was shorter but collas are much bigger. It is short because I didn't transplant until 2 weeks into flower. . About to flush and harvest this week but the leaves are all showing heavy deficiencies. Does that mean there are still a lot of stored nutrients in the plant?????? thanks for the help in advance. BM

This is a buckeye Purple grow from Melvanetics. This is my third run with my notill soil blend. Water only with occasional compost brew blend to feed the microbes in the soil. Using a 900w viparspectra led light, with veg mode on a 18/6 cycle. It is being grown in a 3x3x5 grow box, with 4 plants. One BuckeyePurple is being grown outdoors.