Vote Now 🏆 for the Grow Awards 2025!
Recommended
Likes
Comments
Share
This week, the plant continued to develop with no major issues. However, signs of a magnesium and calcium deficiency have started to appear, which may require adjustments in the nutrient schedule with Calmag. The plant was watered once with clear, pH-adjusted water to maintain a stable environment. A mild yet distinct aroma has also begun to emerge, hinting at the plant’s unique character as it matures. Overall, growth is progressing well despite the minor nutrient deficiencies.
Likes
2
Share
@Haoss
Follow
The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves. She's feeling great. 💚🌱
Likes
6
Share
Likes
10
Share
01/29/25: The journey begins with five Runtz feminized seeds from Zamnesia. To ensure a strong start, the seeds are placed in room temperature distilled water pH’d to 6.0. This softens the outer shell and allows moisture to penetrate, triggering the early stages of germination. Distilled water is used to avoid any potential contaminants, ensuring a clean environment for the seeds. A slightly acidic pH of 6.0 is ideal for early root development. The cup is set on an AC Infinity heat mat at its lowest setting. Maintaining a stable temperature around 75-80°F (24-27°C) encourages germination by simulating warm soil conditions. Too much heat could damage the seeds or dry them out, so a gentle, consistent warmth is applied. After 20 hours, the seeds will be transferred to a growing medium consisting of 85% coco coir and 15% perlite. Coco coir is chosen for its excellent moisture retention while still allowing for proper aeration. The addition of perlite improves drainage and prevents the medium from becoming compacted, ensuring oxygen can reach the roots. By carefully controlling the environment at each stage, these Runtz seeds are given the best possible conditions for a strong and healthy start. Updates will follow once they’re in the medium. 01/30/25: After 20 hours of soaking, the Runtz seeds have absorbed enough moisture to begin their journey. A couple have already cracked open, revealing the tiny beginnings of their taproots—the first sign of life. With germination officially underway, it’s time to transfer them into their growing medium. A fresh batch of 85% coco coir and 15% perlite is prepared, ensuring a light, airy structure that retains moisture while providing adequate oxygen to the roots. The mix is carefully placed into five starter pots, where each seed is planted a quarter of an inch (0.6 cm) deep before being lightly covered with more of the medium. This depth provides enough coverage to protect the seeds while still allowing them to break through the surface easily once they sprout. After planting, the medium is watered with distilled water pH’d to 5.8, slightly lower than the initial soaking water. This pH level optimizes nutrient availability for young roots once they begin developing. The starter pots are placed inside an AC Infinity Propagation Kit on the heat mat at its lowest temperature. To maintain high humidity within the dome, a small amount of distilled water is added to the bottom of the propagation tray. As the heat mat warms the water, it will create a steady supply of moisture in the air, helping to keep the environment stable while the seeds settle in. With everything set up, the seeds will now be left undisturbed for the next four days while I’m out of town. The goal is to return home to find at least four out of five seeds successfully sprouted. Since I plan to run this grow with four plants, I’ll select the strongest seedlings if all five make it. The chosen four will be transferred to the grow tent to officially begin the vegetation stage. For now, all that’s left to do is wait and let nature take its course. More updates to come once I return. 02/04/25: After returning from a four-day trip, I found that two of the five seeds had successfully sprouted. They were standing tall, looking strong, and showing early signs of healthy development. The other three, however, had yet to emerge from the coco coir. To assist the late starters, I carefully used a wooden toothpick to gently remove some of the surface medium over each of the unsprouted seeds, searching for signs of life. After locating them, I lightly covered them back up and used a spray bottle to redampen the surface without over-saturating it. Now, one day later, two more have broken through the surface, bringing the total number of sprouted seedlings to four. Three of them are looking strong and healthy, well on their way to transitioning into vegetation. The fourth newly emerged seedling appears weaker and slightly struggling, but I’ll leave it undisturbed and allow it to strengthen naturally. The fifth seed remains unresponsive, with no visible sprouting. At this point, optimism is low for that one, but since the goal was to grow four plants, everything is still on track for a successful run. With germination now complete, I’ll be starting a new entry to track Week 1 of Vegetation on the 6th. Excited to see how these Runtz seedlings develop from here.
Likes
2
Share
@Haoss
Follow
The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves of the avemoth. She's feeling great.💚
Likes
6
Share
1/28/25 She has a very strong berry smell to her. Very different from her sisters 1/31/25 kinda late but i lollipopped a bunch of lower branches 2/3/25 downloaded the photone app and noticed the levels of par are very displaced and was able to raise the lights to get a better reading.
Likes
4
Share
@Haoss
Follow
The beautiful girl has started growing right now. I haven't fertilized her yet. I've done some topping and removed the small leaves, She's feeling great 💚
Likes
11
Share
25/01 Still having problems with the heat, I've build a exaust with 2 120mm computer fan, this week has arrived the humidity controller and I noticed that is to low for the temperature. Now I waiting for a mist maker to build a DIY humidifier(using a simple water spray for now) I belive this will be the solution to get a better VPD and control this fucking heat inside the tent 😎 30/01 The temperature is reaching more suitable levels, between 25-27°C. Even with the rainy days and higher humidity outside, the grow is stabilizing well at around 65% humidity.
Likes
2
Share
Last week for the 8 , on Feb 1st will be flipping them into bloom 12/12. I think I did well flatten em out like a table. If one tall than the other I’ll try my best to tuck em & if too many buds site to the side or nodes then Ima let em be…. Prolly have to get a 2 nd net trellis…
Likes
Comments
Share
@Jd1971
Follow
Likes
Comments
Share
@Jd1971
Follow
Likes
14
Share
@Hashy
Follow
******************************************** Week 10 mid flower (week 4 flower) ******************************************** Light cycle=12/12 Light Power=180w 75% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 54% Rh step=0% Speed max=10 Speed min=3 Extractor controller settings (during lights off). High temp= 21c Temp step=0c High Rh= 58% Rh step=0% Speed max=10 Speed min=3 Smart controller settings (during lights on). Lights on=9.00am Radiator on= -22.5c Radiator off=+23.0c Top fan on= Smart controller settings (during lights off). Lights off=9.00pm Radiator on=-18.5c Radiator off=+19.0c Top fan on VPD aim=0.9-1.4 DLI aim=30-35 EC aim=0.8-1.5 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 8-17-26 Method= Automatic Feed=Flower nutes Neutralise=0.1ml/L Plagron bloom=4ml/L Plagron Power buds=1ml/L Green Sensation=1ml/L Easy Ph Up=0.021ml/L (1ml=23 drops, each drop is 0.043ml) Ec=1.55 PH=6.2/6.0 Runs=18 Run times=4mins (L/L each) Gap times=16 mins Total runtime=72mins(L/L each) Total flowrate= ml/min(ml/min each) Auto start time=10.00am Auto stop time=15.44pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅8/12/24 Sunday (Day 64)(flower day 24) 📋 💧 Automatic mid bloom nutes Ec=1.55 PH=6.2/6.0 Volume=10L Volume left=1.25L Volume used=8.75L(ml/min) Volume each=4.37L(ml/min) Runoff. Total runoff=1.1L Ec=3.5 PH=/6.1 💧 📅9/12/24 Monday (Day 65)(flower day 25) 📋 HST, broke a main cola and hopefully fixed it. 📅10/12/24 Tuesday (Day 66)(flower day 26) 📋 Raised scrog net slightly and adjusted cola positions. Slight light bleaching on the very tops so lowered power to 160w. 📅11/12/24 Wednesday (Day 67)(flower day 27) 📋 📅12/12/24 Thursday (Day 68)(flower day 28) 📋 💧 Automatic mid bloom nutes Ph up=0.231ml, 6 drops Ec=1.55 PH=6.2/6.0 Volume=11L Volume left=2L Volume used=9L(ml/min) Volume each=4.5L(ml/min) Runoff. Total runoff=0.4L Ec=3.25 PH=/6.3 💧 📅13/12/24 Friday (Day 69)(flower day 29) 📋H=90cm D=16cm Dli=ppfd= Raised light H=90cm D=25cm Dli=ppfd=46.8 📅14/12/24 Saturday (Day 70)(flower day 30) 📋H=90cm D=25cm Dli=46.8 ppfd=1080 ******************************************** Weekly roundup. 📋 Looks like she has finished stretching now, she looks nice and healthy, she has a good amount of spacing between the colas. 22.4kw rad Temps were a bit better this week so the radiator only used 22.4 kw £5.60 Take it easy. Back soon. ********************************************
Likes
Comments
Share
@Jd1971
Follow