3/16: Rain let up for half the day, but more tonight...damnit... They are due for a watering tomorrow, but with the high RH, maybe not... 3/17: They weren't ready for water yet, so I slept for a few bonus hours! (rare) All three of these plants are progressing nicely. The shortie is a little behind her sisters in terms of ripeness, but her buds are developing well. It rained for most for the day....again...😣 3/18: I watered them with about 1/2 gallon each including terpinator, signal, sweet & sticky, cal-mag, armor si, endoboost, humic acid, and a little cha ching. It rained all night again..and most of the day today. I took some photos with the qb's turned off and a 135w 5500k CFL on.. 3/19: It rained all night and several times again today...ffs....I've started building an Ark in my free time 😁 3/20: Rained again on and off today..RH still too high... 3/21: Rained again tonight.. I had to pick up a couple of them while removing a couple of other plants, and they are still heavy. I might be able to wait until Monday to feed again, which might be enough time for me to get the RH back down a little bit. 3/22: Rained again last night several times...and again today for a couple hours...ridiculous. Woke up with RH at 65%!!! Been chatting with other FFT growers and they all seem to be losing a lot of produce to botrytis...I'm starting to freak out..😳

Final de round. 200g nos potes.

Back to the 1000 wt as temps here are modest for July atm. Still 1 plant not flowering like the other 2. I will be patient as it’s overall structure looks amazing. Slowly easing into the process not as much anxiety about every little thing. Changed my light out for my lower power 600 wt led instead of the 1000wt TMLAPY. Maybe not the right move i really don't know what to do b/c i have tip burn and my tent gets a bit hot in the low 80s when its in the 90s here in Illinois. I have an makeshift cooler w fan and some fans and my exhaust fan system which im pretty sure is under powered and overall and bad beginner purchase. I will upgrade as soon as i can financially afford to. Also had flooding issues in basement which is always an adventure, i eventually need a better way to get my grow tent up off the ground b/c water does get in there sometimes. Doing everything in my power to avoid mold and have fans and filters and cleaning, but again this may have been a beginner mistake and i may have to find a new home for the tent for the next time. Also I definitely had been under watering the girls and came close to one of them dying and have to remove some yellow leaves at bottom, they all look stable now. 1 out of 3 plants has a darker color and looks fuller and healthier w less tip burn but it is shorter only has a couple of hairs where the other 2 are going full on into flowering with so many hairs and growing much taller. Possibly stunted the growth... Anyway the word of the day for this week is TIP BURN. I will submit a question to follow. i recently uploaded a video that should show all 3 plants w the tip burn.

I've been lollipopping the plant. Things are looking and smelling good. I'm trying to maximize the vertical space of my grow room and I think I'm almost at the right height. I've been keeping the light going at 75% (of 1000w) instead of 50%, which apparently I can get away with in the winter.

Transplanted to 7 gal pots....gave the girls a trim. Changed soil to SOHUM with pumice. Still have note burns on the tips of some leaves. Thinking of forgoing nutrients and just go with plain ph balanced tap water. Any thoughts fellow growers? Any advice would be appreciated!

Hi all! 😊👊 Week 1 flower Defoliation couple days before Remo nutrient Aelius led 300gh 7 gallons pot with hp promix 1 gallons water every 2 days

She’s starting to really fatten up now!! The buds feel dense all ready and she’s still got another 3 and a half weeks 👊🏻 She’s mad sticky too 😆😎

Just got a remo kit. Goin to start adding astroflower, kelp and remo bloom this week. Dropped humidity to 45.

Day 56 ladies are really starting to get some massive buds, tent smells amazing! I can’t wait to see what this harvest looks like😍😍 Thanks for following & make sure to check back for daily updates friends! Happy growing✌️🏼🌱

Prima settimana di fioritura . tutto ok .ma con qualche altra iniziano a spuntare sorprese inaspettate....beh questa è la natura 🤷😂💪👍🙏

2nd October 2018 - Day 99 Burn slows down Third day of flush and she starts to thicken up. Day 100 - Sweet smell begins as she starts to mature. Day 103 - Begining to mture and dense. Day 104 - Water added and pH balanced 5.4 Day 105 - Last week of Flush

Starts last week (8th) my friends! Flush started on day 121, i have planned 10-12 days cause i did a massive wash on the first day and its run off was 530 ppm. During this week: Ro water Low temp during day and night (to stress a bit) Only water (for now she is still drinking) Last day-s full dark (last stress) Aaaaaaand for this week it's all! :) I will harvest in few days, after 10-12 days of flush :)

Veräuft sehr gut, aber mein Problem ist,das ich nicht genau weiß ,welche Blätter besser noch weg können,und welche Sie benötigt.Bei meinen letzten Grows habe ich zuviel abgeschnitten,und die Pflanzen haben es mir nicht gedankt.Jemand einen Tip.Habe dutzende Tutorials geschaut,aber es ist trotzdem schwer. P.S so ein Stretch gibt es gar nicht ca 60cm in 3 Wochen gewachsen,glaubt mir Keiner!!! Habe jetzt ca 30% Blätter abgeschnitten, es werden noch etliche folgen.Am WE wird sie nochmal richtig entlaubt,will sie nicht so stressen!!

I think I skipped a week here or so, but not much going on, just fattening up really nice, smell is coming along, very happy so far. i'm at about 45 days from flip, about 33 days from first pistils so i'm thinking another 3 weeks minimum. started to drop day temps down, i'm running 75-77 now and i'll drop it another degree each week. pretty constant 50& rh. i'm probably going to go down to 11 hours of light towards the end also. might throw some GH ripen at it

She’s almost ready!!

Sadly Zkittlez #2 will no longer be with us. I had to make an executive decision to remove her. I really wasn't sure what was going on. I noticed that her stem were extremely soft and really sticky with a strong chemical like smell. Being that her stem were extremely soft, I could see how any buds would be able to grow. Since the other three girls were in late bloom and doing extremely well I didn't want to jeopardize their progress in late bloom. She was only a week younger than her sisters. R.I.P. Zkittlez #2

Fast Buds Tangie'Matic is growing strong. Still feeding Recharge only and she's loving it. She still has plenty of stretching to do, it should be an exciting week ahead! 👍

New week starts! I will wright updates every day now. Cos I don't want to keep photos on my mobile devise. I'll make new photo of a new day, load it up and delete immediately. Keep it safe, guys. 🌞13.11.2022 I putted some more substrate to cover my flowers to the leaves. It's only 'training' till now. Also, one of my mini ventilators started to make a creepy noise. I ordered two more cheap mini USB ventilators. I hope they will live longer. That one died after a couple month of work. Sadly... 🌞14.11.2022 Next day morning my ventilator died. I scrued it apart. Then I remembered I have tattoo machine oil in my garage. When I oiled it and turned ON it began to spin like new... Mb I acted stupid buying two new ones, mb not. It's written on the oil tube: 'Oil your tattoo machine every 30 hrs'. So after a few days we'll see. :-) 🌞15.11.2022 The second one plant has a slightly larger second pair of leaves (triple ones). Maybe because it came from her seed one day later. There were a seed peeling problem to both of them and I was forced to help. A difference in germination time was about 8 hrs. 🌞17.11.2022 My ventilator died this evening. Two others I ordered didn't come to me yet. But they should come tomorrow. I don't know will they pass, but it will be better then nothing... 8 hrs difference between growing flowers still noticeable, it's disposed on photos. No feeding for today. 🌞18.11.2022 Today two new air coolers came. They are good quality and power for their's size but too noisy. Not so bad, I say. I installed one of them (it's on photo) and leave the second old one on it's place. It still works and a noise is not so loud. I wunder, why my plants are different by the size. Maybe because one of my old ventilators stopped all the time? 🌞19.11.2022 I watered my girls with 'GHE Pro Roots' and measured drainage today. Input was ph6.0 and outflow - ph6.5. I think we'll be OK in a few weeks. I learned from the grow questions that auto flowers grow better and bigger in pure coco with perlite, but i have mix soil/coco/perlite in my pots. Now I nervous if all will be OK. But my substrate is soft (tapped it with my finger) even when it's watered. We'll see how it'll go compared to others diaries of the same strain.

All is running smoothly. Upped calmag and started feeding tiger bloom. A few yellow leaves on bottom every couple of days. Will be doing a heavier defoliation this week. Photos/video taken 77 days after breaking soil, day 14 of flower