The Grow Awards 2026 🏆
Likes
Comments
Share
This week has been awesome with these ladies! Have moved them to the flowering tent and letting them get acclimated in here. Will prolly do 1 more week then switch to flower for this tent! Have got all 6 ladies all stacked in here all tight together. They are already demanding alot of water so I can see how a drip system might be nice but idk if would work for coco Still doing same 5.6- 5.7 ph declorinated water with a heavy feed. Still doing some training as these girls grow so have more tops as they streach. I maintain about a 60%RH for this room for now and give them ladies about 1400ml every 2 or 3 days. Will do a pre-flower check again in the next couple days should be showing havnt looked much! Fingers crossed!! Much
Likes
11
Share
@UrbanBoer
Follow
Week39 Had to stripped of the brown dried bud, to facilitate the reveg, now she's vegging at dope pace, she will flower with the summer day cycle, and it will not be distrupted by change of season, she should be done with flowering by then.
Likes
4
Share
Eccoci qui... Per problemi di lavoro ho tardato un pò la pubblicazione delle foto, la piccola purtroppo ha subito un forte stress durante le settimane precedenti e ad ora sta un pò meglio ma comunque ne ha risentito. E' la piccola con più resina e mi fa ben sperare nel risultato finale... Grazie a tutti per il supporto, NON VEDO L'ORA DI RACCOGLIERLA 🔥🌲❤️
Likes
283
Share
FD36 - True to form I completely forgot to take any pics before the lights were out. The third week in a row. I'm detecting a pattern... lol FD37 - Pics! FD38 - Today, I was proactive in trying to prevent botrytis (budrot) since I have had problems in the past when temperatures and humidity get too high in late flower. I started with defoliating hard by removing fan leaves. That should lower the humidity in the tent as there are fewer leaves to transpire moisture, and also increase the airflow around the buds. Finally, I put my small humidifier in the tent to further lower the humidity. FD41 - The anti-humidity measures are working. The tent went from an average RH in the high 60s to the high 40s. (The average RH in the last 24 hours was 48.9%.) I'm happy with that, which should be enough to avoid budrot. Better safe than sorry, so I did additional LST to open up the plants and thus increase the airflow around the buds. It's also helpful to increase light penetration, so win-win. FD42 - We're at the end of the sixth week of flower, and things are chugging along in the tent. The buds are slowly fattening up, but it will take some time before they are done. There isn't much to do in the tent this late in flower besides watering. Today, each girl got 2.5-liters of water @ pH 6.5.
Likes
12
Share
Hi guys! I have grown strains from Zamnesia quite a lot time, but this one was the highest yielder from them. literally I have no words for this yield. The tent was 1 square meter and she was alone. Did not smoke a lot from them becouse I want to give a long cure, but what I have tried was amazing. I did the harvest in 2 parts. During the grow I had Mold attack becouse of the size of the buds and the humidity of the grow room. And the loss was almost 50g :(( First: 370g Second: 100g
Likes
6
Share
@Arcadium
Follow
Had a heat wave blow through, 32c days, plants blasted all day. Growing much quicker, easy week, didn't do much, may start scrog net next week. Final topping has recovered, even canopy forming, no issues at all. Weekly lost coast spray and 2hr 15min of drip was it for this week, top dress feeding next week.
Likes
33
Share
The plant kept stretching during this week. I'm a little bit worried as I don't see the flowers touching each other to form nice colas, but she's healthy so I can't complain, it's my first grow after all. Just hoping in fatter buds and not many popcorns. She's drinking a lot of water in these days and the EC was higher when checking it before the daily refill. Don't know why she's eating less, but I lowered it to 1.6 again. I give her what she wants. Keeping an eye on her development and trying to figure out when to add the P-K booster. No particular problems this week, everything is going ok. I gave her another (hopefully not too heavy) defoliation at day 59 so i guess I'm not going to touch her again till harvest.
Likes
17
Share
It’s the last week of flowering, and I’ve moved the plant into 48 hours of darkness to help boost trichome production before harvest. ✨ The plant has developed an incredibly deep purple color and is covered with trichomes—so much so that it sparkles under any light. The scent is amazing, filling the room with a sweet, candy-like fragrance with a touch of diesel. 🍬 When I trimmed a few leaves to prep for harvest, my scissors actually turned purple from the resin! That’s a first for me and shows just how rich and sticky the trichomes are on this plant. 😮✂️💜 I’m so excited to see how it looks and smells once it’s fully dried. This grow has been unforgettable! 😁🌿✨
Likes
6
Share
@Deniguez
Follow
Stretch regolare ed omogeneo per tutte le bimbe! Ad oggi mi ritengo soddisfatto di queste genetiche! Continuiamo e vediamo come procede Stay fuc*ing tuned
Likes
17
Share
@SuperGlue
Follow
Все отлично , визуально выглядит здоровым растением , не смотря на мои манипуляции с ним , в замедлении роста замечен не был :) в течении следующей недели плавно переходим на 12/12 . Свет программируемый на ежедневное сокращение часов освещения, так же как это и происходит в естественных природных условиях. 28.10.20 последний день Веги , завтра переходим на 12/12
Likes
2
Share
@TTerpz
Follow
Harvest day First day of dry 10/2/25
Likes
16
Share
Hello Diary, Epsilon F1 is the fifth hybrid F1 strain from the Royal Queen Seeds lab that grows on my small farm. This time, all three plants on the farm are Epsilon F1, but the soil mix in which they grow is different. But before I describe the preparation, a few words about the strain itself. EPSILON F1: Epsilon F1 is the fastest of all of our F1 cannabis seeds, and combines genetic traits from some of the most notable cannabis varieties of the last decades, including Blue Dream, Blueberry, Amnesia Lemon Haze, and Black Domina. She boasts delicious aromas, plenty of cannabinoids, and, like all RQS F1 seeds, unrivaled stability, resulting in a uniform crop that consistently produces buds of unwavering quality. Plus, her autoflowering trait and extra-fast flowering time make Epsilon F1 an ideal choice for growers focused on getting to harvest as quickly as possible. Epsilon F1 features a rich aroma that combines hints of fresh herbs and citrus with full-bodied earthy notes and touches of blueberries and lavender. Epsilon F1 is a mid-strength variety, consistently producing solid levels of THC and a terpene profile dominated by myrcene, farnesene, ocimene, and limonene. Not only do these terpenes impact Epsilon F1's delicious aroma, but also its effects, endowing it with a long-lasting, physically relaxing stone that soothes the entire body (predominantly courtesy of myrcene, linalool, and farnesene), mixed with an uplifting, motivational kick (from limonene). SET-UP ON MY LITTLE FARM: Box - Secret Jardin DS120W 120x60x178 Lights - MIGRO 200+ Ventilation - TT Silent-M 100 Filter - Primaklima filter PK 100/125 Fan - Oscillating Koala Fan X 2 Humidifier - Beurer LB 45 Soil - BioBizz Light - Mix Pot - 11L Air pots Seed - Royal Queen Seeds Nutrition - RQS Organic nutrition Let's officially start the diary: 02/08/2023 Planting. I prepared a total of three pots, as usual. And this time I used AirPots, which proved to be the best option. I've been using them since the beginning. I used the soil from BioBizz Light-Mix. Pot #1 - I first put Easy Boost Organic nutrition in the form of pellets into the ground, then I added SeaWeed and Mycorrhiz in the recommended doses and mixed everything well. Pot #2 - I also put in Easy Bosst Organic nutrition, Seaweed and Trichoderma. Also in doses according to instructions. Pot #3 - Along with Easy Boost Organic nutrition, I put Bat Guano and Trichoderma. After I prepared the soil, I soaked all the pots well with water and made small holes in which I placed the seeds. I then placed the pots in the Grow Box where the temperature was around 28 degrees and the humidity was around 55%. 05/08/2023 I sprinkled a little water on the surface of the soil. Not too much. 06/08/2023 All three plants sprouted. 07/08/2023 I watered the plants with a little water. Approximately 0.5 liters per each plant. 10/08/2023 Watering. Each 0.5 liters of water. That's all for this stage, see you soon and thanks for your support.
Likes
3
Share
@growwise
Follow
Dream Queen #1 tallest @ 5.5". Been a struggle this week trying to dial in humidity. Had ranges between 20-80%. Hope to get a humidity controller this week. Watering with leftover fish fertilizer from last feeding. Added 8 oz of worm juice from my worm farm totes. 20% runoff with 6.2 ph and 2900ppm. Crazy high I think. Watching to see how the react before I make any adjustments. 1/13 everything going as planned 2 dream queen and 2 g.s.c transplanted to 1 gallon pots
Likes
5
Share
26-05-2025 I forgot to measure my plants last week, but it seems they have gained some leaves and some height! I’m waiting for the weather to be warmer to put them outside. It seems the Royal CBG is behaving like a princess. It needs something, the leaves are turning a bit yellow…
Likes
8
Share
Showing some color now. Smelling good in there. this is basically week 6 now, (i missed a week) and is getting more GP3 BLOOM, I did finally get in to do somewhat of a defoliation
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
8
Share
Week 10 now and nearly ready to finish up, think I am going to stop giving nutrients this weekend, the girls are absolutely stinking.. getting nice and sticky,, they are quite dense too which I wasnt expecting.. one plant has pretty much just fox tailed the whole time, but happen to go the tallest and probably the frostiest.. all in all though happy with the turn out so I'm looking forward to getting them chopped ect and trying it out :)
Likes
22
Share
@Vincent11
Follow
Hello everyone Fat Banana is doing amazing the hot weather here has given her a extra boost this week. She is filing those buds nicely. Trichomes are everywhere and in big numbers to. And I have given her the first dose off PK13/14 nutrition. I will give her this for the next 2/3 weeks when feeding. Not much more to say then Happy Growing all