Likes
Comments
Share
Melonade Runtz got harvested 16/11 and I'm planning to let her dry for 14-21 days before trimming and put them in glass+boveda (58%) and grove bags for final cure. Drying conditions are as follows: 16-18°C 55-60% RH
Likes
26
Share
3rd of September, Still drinking buckets and buckets Really fattening up now, Rain is expected next week, off course! Big showers and thundrrstorms She needs another trim soon for good airflow during the wet days
Likes
28
Share
This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!
Likes
15
Share
Seems to be taking well to being moved to the 5gal pot. Growing a lot faster after the 2nd day in the bigger pot. Watered for the first time since planting in big pot after 5 days with 1L distilled water (Ph 7) mixed with 1/2 tsp. fox farms grow big and 1/2 tsp. big bloom. Since my soil is considered hot soil I wanted to use less than the recommendation on the bottle.
Likes
25
Share
@Luna91
Follow
Hey Guys! Pretty satisfied this week! I have watched over the tricomes and almost all are cloudy so I started to Flush them2 days ago. My guess is 5 more days to Harvest. I’m pretty excited to smoke my First Grow!!! Really waiting is the hardest part now. The shape & Smell of pineapple 🍍 and passion fruit is killing me...so good! I’ve learned that this specific genetics reacts very well to wind stress and likes cooler temp for the best yield and odor, that’s why I’ve got a giant AC in summer for them and it really worked!!! If you’ve seen the video, I’m growing 3 more beautiful seeds, I’m gunna add a diary for themand it’s very easier than growing for the first time, but I haven’t stopped learning. In General, Im in love with growing, makes me feel ALIVE.☺️ Thanks for keeping up with my girls.
Likes
4
Share
@AustinRon
Follow
OG 4Q24 Seedling Bolt III Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Dec 25, 2024 CR2 4Q24 1:B:1:1] End of Week: [Tue Dec 31 , 2024 CR2 4Q24 7:B:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ Week’s Objectives: - IFF We’re still HAND WATERING, ADD First Resin Bloom to Full @ 4ml/gal. - We can’t replace RLA’s Carbon Component with/out ~300 ml/Gal Ful-Power (Fulvic Acids) We WON’T be doing that. Rather, we’ll see a diminution of Carbon provided, look for 3-5 days to stabilize after switch to auto-irrigation. EC Starting Water: ec: 0.0 mS/cm, pH: ~7  __ Wed Dec 25, 2024 # Christmas Day OG 4Q24 15:B:2:1 Watered late tonight (~2200). - NO RUNOFF - Barely the beginning of Burnt Tips - Grew 2” overnight - raised light 2”, Canopy Distance is 19.5 @ 77% (770 ppfd) After Watering - With REDUCED Light, Plants are FRISKY Leaves raised (but no fingers in light sockets) - # We’ve got Pistils (Noted Yesterday) - Ceasing Foliar . . . IT’s been good. ;-} Runoff: NO RUNOFF Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml]  Standardizing Lighting __ Thu Dec 26, 2024 # BOXING DAY OG 4Q24 16:B:2:2 Scotoperiod: [ 12, h] EC: [ 2.4, mS/cm] Temp: [ 79, °F] RH: [ 68, %] VPD: [ 0.85, kPa] NOTE: If we’ve no runoff today, Water AGAIN at Midnight, Install Auto-Fertigation Tomorrow Raised Light 6 Clicks - Grew 2” Overnight - Light Distance ~20” @1900 - Fertigation Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml] IPM: - [x] Zymes Bomb - Top to Bottom, including Airpot Sides.
Foliar DRENCH w/ Zymes at 1:31 water dilution. Drenched top and bottom of leaves, stems, JOINTS, Coco Top, and spraying down ALL Airpot Side Holes, and BOTTOM OF AIRPOT. Letting the girls run up to 82°F, RH @ 69%, VPD ~9. Plants are HAPPY w/ EC: 2.4, w/ Moderate High Lighting (~770) If they’re happy before lights out, and I know it - Let’s raise light to 80% (800 µMol/m2/s), adjust airflow for overnight Temp (Humidity Down). And call it a night. After Raising light to 83%, REDUCED again to 77% @0600 __ Fri Dec 27, 2024 OG 4Q24 17:B:2:3 Runoff: [ 500, ml], EC: [ 1.7, mS/cm] Raised Light 6 Clicks (Grew 1.5” Last Night). Light Distance back to ~20” 1.5 Gal fertigation - let’s do 1900 & 1200  Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] After 2:30 Feeding - Raised light to 83% __ Sat Dec 28, 2024 OG 4Q24 18:B:2:4 Temp: [ 82, °F] RH: [ 68, %] VPD: [ 0.96, kPa] Light Distance: [ 19.5, “] Fertigation: RLA Heavy, Flower Week 3; EC: 2.4 Notes: - Evaluate 83% Dimmer at Lights On - Back off to 77% if any indication of Light Stress - Let’s ramp to EC: 2.7 mS As max. Beyond here, we probably don’t have sufficient CO2. Light Intensity (IDEAL): 83% # ~830 µMol/m2/s EC: 2.4 422 ml/plant, runoff, EC 1.5. Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] 420 ml/plant op Crinkly LOWERS - EC Too High Too Fast? __ Sun Dec 29, 2024 OG 4Q24 19:B:2:5 EC: 2.3-2.4 The Max Hydro comes in at 2.36 EC. RLA Hydro Chart set 3.4. How Can Be? DROPPING SILICA SKIN from RLA Hydro (Eliminate Brown Patina, and Small Orifice Build-up) RLA Hydro  Nutrient Element Ratios ppm mS/cm NER N 262 0.5 21.8% P205 143 0.3 11.9% K20 476 1.0 39.7% Ca 214 0.4 17.9% Mg 48 0.1 4.0% S 57 0.1 4.8% Si 0 0.0 0.0% C 333 TOTAL 1533 2.4 100.0%  
RLA - Full - [x] Complete Irrigation Install Defoliation I We want to eliminate All Vegetation from TOPPED NODE (3) Down. - [ ] Count NODES FROM SPLIT - [x] Measure Plant Heights: 11 - 17” - [x] Remove Each Pot and Trim OUTSIDE OF TENT (Get it RIGHT!) - [x] Can we adjust the pot positioning to get ONE UNDER CANOPY Fan? - [x] Eliminate FANS and Growth tips NODES 1 - 3 (3 is TOP SPLIT) - [x] Eliminate FAN LEAVES from First Node of MAIN STEMS - [x] INSTALL DRIP RINGS (No Manifold, Yet) - [x] Apply LABEL to Each Plant - [ ] Consider Eliminating FAN LEAVES from Second Node of Mains _______ Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 54.1, ml] # EC: 2.4 MAX - [x] Photosynthesis Plus: [ 24, ml] - [x] Quillaja 60 Powder: [ 0.25, tsp] - [x] SLF-100: [ 15, ml] Time Set Initiate Complete Event 1 18:45 18:45:25 Event 2 20:05:00 20:05:25 Event 3 21:25:00 21:25:25 Event 4 22:45:00 22:45:25 Event 5 00:05:00 00:05:25 Event 6 01:25:00 01:25:25 Event 7 02:45:00 02:45:25 Event 8 04:05:00 04:05:25 Event 9 05:25:00 05:25:25 CHANGED TO 25 SEC EVENT (from 20) Tuesday - / / / __ Mon Dec 30, 2024 OG 4Q24 20:B:2:6 - [x] Harvest Dehu Water Continuing to RAISE LIGHT ~ 2”/day (6 Clicks of the support ratchets). Runoff: - [ 422, ml, plant!!!!] # Reduced Event duration to 20 Seconds (from 30). - [ 1.4, mS/cm] Lowering light to 70%, see if lower fans relax. They’re electric. :-). They relaxed. Inner fans surrounding apical stems are laying @ 30°, rather than Reaching for 60°. I have perhaps been overnighting. HUMIDITY IS CRANKING. It’s impossible to get VPD above ~8.3! Trying to keep humidity below 68 drives Temp below 78. I forgot about the part. ;-( Dehumidifier is ON, Doors are Closed, Room Vent is CLOSED. Dehumidifier is delivering 50%RH to the room. Orange Gasm is quickly filling the air with moisture. At MIDNIGHT, Raised light to 77% ( ~770 µMol/m2/s] pH Adjusted 2 Gallons of Filtered Tap to pH: 7.2, EC: 0.3 (Used for Dilution when refreshing reservoir with DEHU and Fresh Supplements. __ Tue Dec 31, 2024 OG 4Q24 21:B:2:7 @0630 Took a peek in the tent. SCANT RUNOFF @ 20 Sec Feed Events. JUST Touched TIPS (Burning). Bumping Fertigation Events to 25 Seconds, after Feeding 9 * 5sec (45 Sec) To bring DAYS delivery to 25 Seconds. Check Reservoir: - We’ve 4 - 5 Gallons. @LIGHTS ON - Reset Light Height - Reduce light to 73% (See if we can avoid more tip burning) Harvest Dehu: - [x] Amount: [ 5.7, l] - [x] Primer A&B: [ 27, ml] # For EC: 2.4 mS/cm, Nailed it, First Try. ;-} Orange Gasm likes to SPREAD when Topped. - Which makes her a funny candidate for SOG. ;-} 
Likes
44
Share
@RakonGrow
Follow
Note : + jegliches Zubehör wird in der GermniationsWoche aufgelistet . Zeitraffer Videos folgen immer nachträglich. + videos werden so geschnitten das nur ein geschlossenes Zelt erscheint , ergo Fehlen paar reale Minuten (ca 1 Std) . Day 64: Die Nacht war kalt und die Ventilatoren an . Ergebnis , der Hauptrieb der viel ventilation abbekommt ist wunderschön dunkel geworden. Bilder hinzugefühgt um mal den Vergleich zu haben , beide haben die gleiche Bedingung , sowohl Dünger als auch Licht . Nur das Zoe mehr Wind abbekommt und damit halt eine kältere Nacht erhalten hat . Wir sehen das es wohl keine wirklichen defiziete. Es ist ein verhalten auf die Kälte. Day 65: + 1.75 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Canna PH+ + + PH 5.91 Day 66: Das viele Licht zeigt wie es aus allen Seiten der Buds wächst . Das ist nicht gerade ein Qualitätsmerkmal , eher ein Quantitätsmerkmal . Aber ich möchte auch wissen wie stark sich das auf die Qualität auswirkt . Die Schwester hinkt zwar kräftig hinterher wegen ihrem Wasserschaden, aber zum Rauchen allemal gut . Leichte Cal-Mag Probleme werden sichtbar . Day 67: + 2 Liter Flaschenwasser + + Spülung + + + Canna Boost + + + Cannazym + + + Plagron PH- + + PH 6.0 Day 68: keine besonderen Anzeichen , die Luftfeuchtigkeit ist so zwischen 60% bis 64% . Geht gerade nicht anders . Ist jetzt aber zum abreifen auch nicht Schlimm . Dafür sind die Temperaturen bei konstanten 26°C Day 69: Alles läuft nach Plan. Kein defizit, ergo , es wird nur rest Dünger in der Erde abgebaut. Day 70: + 2 Liter Flaschenwasser + + Dünger für Blühte Generative Phase III + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Canna PH+ + + PH 5.91
Likes
9
Share
@reirrac1
Follow
This plant is an example of top shelf genetics. With very little effort on my part aside from some basic LST on the bottom 8 branches this lady became a serious bush of colas, but with more than enough space for ample light exposure. Smells like sweet spices and kush with an undertone of citrus. Heavy feeder and a quick finisher.
Likes
8
Share
@Kirsten
Follow
26.12.24: These are my 2 best plants P1 and P2 Purple Punch, they are looking great! Not sure what happened to P3. They are in early flower/ pre-flower with the pistils clearly seen on P2. I am also hoping to tie some of the branches down to help light penetration on the lower canopies. I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Processing
Likes
10
Share
@mkrmkr
Follow
Completing the sixth week. Plant 1 - Completing the sixth week of life. Plant 2 - Completing the fifth week of life. Plant 3 - Completing the fifth week of life. Plant 4 - Completing the fourth week of life.
Likes
9
Share
COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
11
Share
This girl grew up to be 77 days old. She grew short and without training, focused most of her energy to her main top cola. Even with the cheap Chinese leds shes got dense and really does pack a punch with a strong aroma and flavor. I'm thinking I should probably get more of these beans while they're are still available because she could easily be end up being added to the favorites list. I'll probably put a few nugs away for a long term cure. She was a pleasure to grow.
Likes
17
Share
Letzte woche für die damen.😋 Bin echt zufrieden mit diesen run. Für die hitze die ich hatte und den kleinen stickstoff problem. Super zufrieden bis jetzt. Hoffe sie haben potenz das es mich auf meinen arsch sitzt
Likes
11
Share
Hello Growers & Tokers! The route to having a jungle starts with the roots! That's why my main goal in those first 14-21 days is developing the root system. I like to give them time to expand the roots which is very important for a healthy plant. That also gives them more time to get bigger and stronger before going into flower. More growth, more bud sites, more buds. Trust me the wait is worth the reward. We'll be seeing some truly sweet and zenzational flowers. This week they got transplanted to their final pot, 11L fabric pots. It's one step closer to getting that jungle, zenzational! Medium used was Light Mix from BioBizz. Synergy from Grotek nutrients was blended in the medium to help out the roots. Let the mycorrhizae do its job and take over the soil, then the roots just follow. Take care out there and happy growing!
Likes
7
Share
Girls are starting to flower, we’re on a 12/12 light schedule now, I let the girls dry out at the beginning of the week. I’ve been watering them with 1/2 gal per day per 5 gal pot. Will start checking soil and weight twice a day now that they are flowering
Likes
6
Share
Hello Diary, White Widow has completed her second week in the vegetation phase. In a week, it grew 8 cm and began to form places where flowers will begin to appear. Sometimes it's surprising how quickly plants develop and grow if they have good conditions. All in all, these first two weeks are developing very nicely. Since it's the middle of summer, the temperatures are still high, but for now I don't see that it doesn't suit them. Sometimes it is over 31 degrees in the grow box. I make sure that the soil does not dry out, so I increased the amount of water when watering. I continue to add Bio Grow Fertiliser and CalMg with each watering. pH I drop to 6.0 with Plagron's Lemon Kick. At the end of the week, more precisely after taking photos for day 14, I increased the power of the led lights to 60%. Here is a quick overview of the week: 04/08/2024 - Day 11. Watering. I prepared 6 liters of water, added the previously mentioned nutrients and with that amount I evenly watered all three plants on the farm. 07/08/2024 - Day 14. After taking the photos, I watered all three plants on the farm in the same way as three days earlier. White Widow - Day 14. - 14 cm That's all from me for this week, see you soon.