Vamos familia, actualizamos la tercera semana de floración de estas Granny’s Home de Seedstockers, salieron las 2 de 3, 66% ratio éxito. Aplicamos varios productos de Agrobeta, que son increíbles para aportar una buena alimentación a las plantas. Temperatura y humedad dentro de los rangos correctos dentro de la etapa de floración. La tierra utilizada es al mix top crop, por cambiar. De 2 ejemplares me quede con los 2 para completar el indoor, también cambie el fotoperiodo a 12/12 y aplique una poda de bajos, se ven bien sanas las plantas, tienen un buen color progresan a muy buen ritmo por el momento, las flores están empezando a formarse, hasta aquí todo. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.

Update day 78

After two power outages that caused low temperatures in the tent for 2 × 9 hours at 15–17°C, the plants recovered very well. Colors are starting to appear in the tent, the leaves are turning red! It seems to be on the right track — the buds are swelling and the smell is strong!

This was a brilliant week for plant growth, with some side branches over doubling their height. I added the ScrOG net at the beginning of the week and began some more intensive training. The broken mainled blue has fully recovered from last week's damage, and is quickly catching up the my other mainled experiment. The LST only plants I pretty much just continued to bend. The topped & LST'd plants I removed some of the lower bud sites that were not getting any light. I also removed a few awkward fan leaves that could not be tucked away. The addition of the net has helped with this though, as keeping the canopy even is much easier with the support it gives. I also decided not to try any further cuts on the (half) mainlined auto's. My reasoning is that they have developed strong, independent colas already, so cutting for more would not see much gain. The plants had also begun to flower on the night I went to perform the second cut, and my growing experience tells me not to mess with flowering plants too much so here we are. I gave the plants one regular watering of 10L pH'd water, and a 20L nutrient mix using the ratios stated above. All volumes were split equally between the plants. The scrawny looking blue critical has perked up a heck of a lot, but is still the weakest of the 3. The strongest plants by far are the ones that have been topped and LST'd, closely followed by the mainlined ones. LST only is definitely great, but it is clearly lagging behind the other two techniques.

Honestly not much to say about the dry and trim, which is definitely a good thing. 12 days hanging in the tent, and the plants were ready to trim. me & the Mrs. absolutely sailed through it. Stores like a dream, and smokes the same. Not a crazy amount of flavour, but the aroma that it has is lime and cream. And the taste is more earthy and spicy. Loving and savouring every bit of it. Sorry I’m very late with this, but I’ve been busy getting my next plants started! You should see them come up soon, as I’m quite behind in my posting. I’m very happy! 🤟💚

Gracias al equipo de Kannabia Seed, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Moby Dick 🐋: Criada a partir de dos parentales icónicos, como es el cruce de White Widow y una Haze pura G13, este choque de titanes provoca un híbrido que golpea a las puertas de las sativas más fuertes disponibles en el mercado. Estamos ante una criatura impresionante en todos los sentidos, con ejemplares que florecen en solo 9-10 semanas en interior y arrojan un peso en lonja de 550 gr./m² Al igual que su padre Haze, nuestra Moby Dick ofrece agradables notas cítricas, pero con efluvios de vainilla y eucalipto, una mezcla de aromas que genera una combinación intrigante, que puede llenar cualquier habitación con una fragancia inolvidable. El sabor es muy parecido a su olor, con toques de limón agrio que harán que tu lengua cosquillee al inhalar, convirtiéndose lentamente en un humo dulce y terroso, con pinceladas de madera e incienso que se adhieren al interior de la boca al exhalar. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%

Res is still 3/4 full at around 650 ppm and 5.6 ph. Decided to leave for this week then change next week. Both shooting out hairs, some of the old leaves are dying off. Just pulled off dead leaves, or almost dead leaves. Did minor lst adjustments and quick tucking.

Asal got a trim to open up the air flow and a LST to spread the canopy a little more. Thinking I am done with the lateral spread at this point. Benesh got the same treatment. Asman has been taking the hits when I have overdone the LSTing. Thank goodness for masking tape and time to repair!

Mar 10th Week 13 Plant is doing great filling out nicely with with bud Mar 13th Fresh nutrients today A little bit more defoliation Plant is healthy happy filling out nicely

Added air injection today

Started off with two seeds but only one survived

Day49: -cut away new lower nodes but keeper the fan leaves -watering 1l/every 2-3 days - LST correction every 1-2 days to keep an even canopy - one branch of top branches grows at a faster rate -looking healthy -Day56 switch to flower phase

Boas growmies! Penso que a royal gorilla #1 quando completar 10 semanas posso começar o flush. 10/08/2021 - O gráfico representa a nutrição misturada em 2,5L de água da Royal Gorilla 1. EC = 1,32; pH 6,2 ;10/08/2021 - Alimentaçao das Royal Cheeses (4L): CE = 1,34mS; pH 6,2 -BioGrow - 7ml; BioBloom - 5,5ml; TopMax - 5ml; BioHeaven - 6,5ml; Activera - 6,5ml; Calmag - 1,5 ml Alimentação Royal Gorilla2 (2L): CE = 0,67mS; pH 6,4 - BioGrow - 0,5ml; BioBloom - 3,5ml; TopMax - 12ml; BioHeaven - 1,5ml; Activera - 3ml; Calmag - 1ml; Reduzi o nitrogenio (biogrow e bioheaven) porque as folhas parecem muito verde-escuro. --------------------------------------------------------------------------------------------------------------------- 13/08 - Alimentaçao da Royal Gorilla #1(2,5L): CE = 1,37mS; pH 6,1 -BioGrow - 3,5ml; BioBloom - 5ml; TopMax - 3ml; BioHeaven - 6ml; Activera - 5,5ml; Calmag - 1 ml; 13/08 - Alimentaçao das Royal Cheeses (4L): CE = 1,33mS; pH 6,3 -BioGrow - 8ml; BioBloom - 7ml; TopMax - 5ml; BioHeaven - 8,5ml; Activera - 9ml; Calmag - 2 ml; Alimentação Royal Gorilla2 (2L): CE = 0,70mS; pH 6,1 - BioGrow - 0,5ml; BioBloom - 4ml; TopMax - 2ml; BioHeaven - 5ml; Activera - 4,5ml; Calmag - 1,5ml;

Using Promix coco mixed with worm casting on the top layer and promix myco to help with seed start

Just been defoliating and changing the water weekly. Yesterday upped the ppm to 1000. Using powderfeed shortflower and Calmag.

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.