Likes
Comments
Share
BW 7, Leute. BW 6 war unspannend. Die Blüten sind schön entwickelt. Die Härchen fangen an sich zu verfärben. Grob geschätzt vielleicht noch 2 Wochen? Wir werden sehen.
Likes
7
Share
So I suspect the Golden Goat to have subtle mag def. I’ve upped the Epsom salts a bit to help. Also the Mandarine XL Auto is amazing and this discoloration in its leaves I believe to be from getting handled and snagging on the trellis when bending through. I try to be delicate, but it shows. I’ve not been taking meticulous account of things but here’s as of day 19… Day 19: Low/High - 66F at night, 76F during the day. Moisture Levels: set @ 56% RH Moisture level fluctuations from 54%-68% depending on time and temperature as well as moisture levels in the pot itself. As the pot gets dry I will lower the VPD a bit. Fly Traps: CLEAN-w/ 2 fungus gnats (1/week) both located @ MXL (MXL= Mandarine XL Auto) No signs of mold or mildew. Ventilation Setting: Humidity 57% RH Light Intensity (Dimmer Switch @ 75%) 3” tall. The Critical Purple Autoflower shares the tent: while exhibiting signs similar to mosaic virus, I believe this to not be the case, and instead a genetic pigment deformation possibly induced from the high UV LED lights. I’m only basing this theory of of other anecdotes. I’m not willing to test the contagion properties, but I’m going to pop a seed for just that purpose. Until then I wear gloves or wash hands and sterilize equipment before and after each plant until I can rule out a contagion or not. Planing to update my feed and get some ppm measurements. Also I’m thinking the MXL is ready for a little Regalia and a foliar feed. Only thing is a 2 hour window from 3-5am! But I will feed a little Regalia and Venerate sometime this week.
Likes
67
Share
@Ageddd
Follow
Sun and Summer finally arrived with 35ºC at the moment. Since 2 days ago, the plant is growing new leaves and the buds are turning into branches again... Feeded with flower nutes.. Cut 2 branches and put it in a ph 7 water, tiny roots are developing as you can see in pictures, i know is not the best clonning method but im experimenting, as this is the way i do it with normal plants.
Processing
Likes
2
Share
@BigGGrows
Follow
Well i figured i would try some different this week. I main lined her and topped her on day 9. Lets watch and see how she responds. I feel as though doing this early in veg will allow her more time to adjust before flower. Towards the end of the week 2, four days after the HST....we see 2 new main top braches coming in, as well as some action at the internodal cut point which is indicating a "Fimm" job rather my prior presumption of topping the plant. None the less i am excited to see her grow, and i intend on letting her grow naturally beyond this point....just to see the results.
Likes
13
Share
12/26-12/28/20: So I have no idea what to expect. I just hope moving the light farther away was a good idea! I've had to turn the fan on a couple of times to bring the 82F temp down and now it's creeping back down. 12/29/20: Still no growth and I can't maintain the humidity above 45%. I placed a piece of saran wrap over the pot to help it retain some water. I also moved the 1000w lamp a little farther away and I have the fan running. I also need to figure out the exhaust set up. Too daunting. 12/30/20: The cherry finally popped and I can see ole girl starting to break the surface. Adding the saran wrap helped with the moisture and this morning was the result. The temp still seems a be high (81F) and the humidity still isn't maintaining (~51%). I watered the seedling a bit and spray twice a day. It's currently back under the wrap. 1/2/21: Ole girl Salisi is growing slowly, but strong. I added a humidifier from Target to maintain the humidity between 40-60%. Temperature still lingers around 82F, but I think that's ok:🤷:. 1/4/21: Salasi is growing with purpose now! Two more days until she graduated to the big pot. I moved her inside of a nursery with vents open and gave her a full watering. RT: 82F, RH 62%. 1/9: Salasi's looking ok but I'm concerned about stem length. I just sprayed inside the nursery and a couple spritzes to the top soil. I'm concerned about thinning?
Likes
8
Share
@Kirsten
Follow
16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
34
Share
Hello everyone, my friends! this week we will do more with the rinsing of the roots, waiting for these magical nuggets to swell even more 😉🍭
Processing
Likes
27
Share
@Reaper
Follow
Start of week 4 I removed the net because of a heatwave a put the plants in a cold room during the night The coockies are now starting week 3 of flower i gave basic nutes everytime they were dry Day 24: the temperatures are perfect (24 celcius) the buds start to show up on all plants
Likes
11
Share
03.08.23-Рост продолжается , цвести еще не собирается и это хорошо ! Продолжаю тренировки лст постепенно увеличивая ппм каждые 3-4 дня . Растет низким и очень кустистым. На данный момент получает раствор на вегетацию greenhouse feeding 1000 ppm, ph 6 , выход стабильный.
Likes
5
Share
@Ninjabuds
Follow
Oh what a hot week. Perfect time to dry some buds with the ac blasting. Happy to be done harvesting and trimming. Now it’s time to wait back and wait for buds to dry and cure I’m excited
Likes
22
Share
@DevelGrow
Follow
Hallo Freunde 👋 die drei sind 21 Tage Alt! Es wurden drei Techniken angewendet,die LST hätte ich besser lolipopen sollen aber ist wie es ist! Ansonsten wachsen sie kräftig und werde je nach aussehen in 1-2 Wochen in Blüte geschickt! Keep Green and grow High ✌️🍀💚🍀
Likes
4
Share
Day 49- This week I think we cut out the nutes and let them finish, atleast for the mbrxgp. The Pablo’s revenge looks to be about a week or so behind so we’ll go until they’re finished. Smells on the mbrxgp is heavy citrus, lemon almost, slight gas. Pablo’s are very earthy, I’m expecting a hashy, dank finish for them.
Likes
2
Share
@Aleks555
Follow
We’ve officially entered week 7 with our FBA 2506 from 42Fast Buds, and the transformation is impressive—our girl is now in full bloom! After a smooth and steady vegetative phase, the flowering stage is progressing beautifully. The decision to experiment with a 12/12 light cycle for this autoflowering strain has proven to be an interesting choice, and so far, the results are encouraging. The plant stands tall and strong in its 10-liter pot, with a well-structured shape thanks to early LST. The climate remains stable with daytime temperatures reaching up to 30°C and an average range of 27–28°C. Humidity levels are consistently between 60% and 65%, which has supported healthy growth throughout the cycle. We continue to feed her with Xpert Nutrients, and the impact is clearly visible—dense flowering sites, vibrant foliage, and a healthy overall appearance. The aroma is starting to build, and the buds are forming with great structure and frost. So far, this grow has been a pleasure, and week 7 marks a crucial point where everything starts coming together. We’re excited to see what the final weeks will bring!
Likes
2
Share
Likes
19
Share
Last week I fought some yellowing of the leaves. Did some small adjustments on PH to keep it in the 5.6 range. Seemed to stop it from progressing. For Week 3 Veg I topped the plants. I plan to flip the lights at the end of week 3 and move into flower. Day 15 I continued to have yellowing leaves even though I had everything looking right. (Added Pic). I decided to look into the PH to see if I was having issues with it. I have a meter in the water 100% of the time taking a reading every 1 sec. It all looked right. But I decided to Calibrate it in 4,7,10 solutions. Found out that my meter was off. So new to the check list is to calibrate the meter before each grow. I was thinking my PH was High, when in reality it was low. put in some PH up to get it back to 5.5 and over the last 16 hours things look pretty good. Leaves look darker. Day 17 Things are looking good. Leaves are getting darker and new growth coming in. Day 18 Turned room temp down to 73F from 76F. Fearing it is warming up my res tank too much. Day 19 Starting to get yellowing again. checked everything and can't find a good reason for it. Did notice some cloudiness in my res tank. Added 2 ML/Gal of peroxide. have Hydroguard on the way to help. I'll be adding more fans this weekend. I have light air movement currently. Also found a few spider mites and sprayed Greencleaner to all plants. Current environment settings: Room Temp 72.74 F Room Humidity 63.63% (After spraying, Trending down). Room CO2 589PPM Tank PH 5.70 Tank PPM (500 Scale) 953 Tank Temp 74.05 F Day 20 Recalibrated my EC probe just to be sure it was also accurate. wasn't off by much. Dialed back my flooding to every 5 hours to encourage Rooting. <-- Strong roots = strong Plants Sprayed for mites
Likes
Comments
Share
This beautiful big lady got some more space in a bigger tent now😁💚
Likes
10
Share
1/29/2024 - Day 29 - Week 1 Flower: She started showing preflower last week, but I'm calling this week 1 of flower. She is only 1 ft tall at the moment, which is much smaller than I'd like, so I'm hoping she will stretch over the next couple weeks. This is why I'm not a big fan of autos. I made one mistake with the heavy fouler feed, and my yield is going to be significantly impacted my that one mistake. It's my fault, but still frustrating.