Drying and curing always the biggest challenge for me due too constant climate change in my area, living near the mountains have its flaws too..🧐 Oh well still love growing..✌️

*** RESULTS ARE IN *** Final results are in! Updated with pics of dry-trim and weigh-in :) Total yield was 228g of bud + 45g trim to be used for tincture. Total weight 273g / 9.75oz This was way beyond what I was expecting! Was hoping to get around 6oz from this grow, so the final result has absolutely blown my mind. But more importantly, it's a !!REALLY!! good smoke :) I've taken half oz off the top and put the rest into mason jars for curing, but even without a cure, the taste is good - sweet and creamy. The smell has come on LOTS through the drying process. When I chopped, the smell was fragrant, but not too strong. Now, you can smell it across the house and no mistake. It packs a punch too, very potent high - Can't wait to share with a few friends :) ********** Well, this has been an awesome experience for my first grow. Thankfully, these girls were super strong - they took a LOT of abuse in terms of high temps (up to 38C some days) and survived me being an idiot in the early days and not really knowing what I was doing. But here we are! Almost didn't want to chop them down..... but I got over that pretty quick. Total wet weight from both was 1339g (47.8 oz), of which about 150g is popcorn / larf. Super impressed with the yield :) My aim is to be self sufficient, in terms of yield being able to last long enough for another grow cycle to complete. With a rough estimate of 3 months per cycle, and based on my current usage of approx half oz a week, I would need this to result in about 6oz when dried, and I think this could be achievable. I will update the dry weight in due course. Can't speak to the quality yet. As tempting as it is to quick dry a test nug for a cheeky toke, I'll wait for it to dry properly, so I can really appreciate it. I've waited this long to harvest, another couple of weeks won't kill me. Also, I still have some of my current stash (hopefully the last weed I'll ever have to buy!). It's really difficult to be patient though, because DAMN it looks good. I'll give the buds a good manicure and dry trim when they're ready. It smells really good too! The smell is not overly powerful, it doesn't slap you in the face like some weed does, but it's delicious! Fresh, bursting oranges, with just an undertone of that unmistakable weed smell......It's like The Man from Del Monte is stood behind you in a queue, and he has an eighth of dank in his pocket that he doesn't think anyone else can smell. If I had to say I've learned anything along this journey, it's that it's better to be prepared. Research things that COULD happen and have necessary stuff on hand when you need it. Don't wait until that deficiency shows before ordering what you need and finding out it'll take 2 weeks to ship (fuck you, covid-19). And there we have it.... will report back once dried for the final weigh-in and smoke report. Stay safe, stay high :)

Day 63 - both ladies are getting fat. Seed 2 is growing a bit faster and will be harvested in max 3 weeks time from this week. The buds are looking frosty and the smell is great 😃

Welcome to Flower Week 6-7 of Divine Seeds Auto Black Op1um I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto Black Op1um Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 8W-10W • Strain Info: 25%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

All good :) very frosty and smells so good. She‘s so happy. At day 35 end of week 4 approaching week 5, i flush her to remove salt buildups since i didn’t had runoff the entire grow ever. She has crazy 2.6EC run off the ph is on the spot though. So lets see how will she react after heavy flush with runoff 1.6EC by week 5. i am now lowering my nuts half of the manufacturers recommendation.

Those three Bubble OG plants are something else. They're stretching up so much, it's like they're on steroids or something. Seriously, in the past week they've shot up a ton. I can't believe how much they've grown. Well, it's Christmas again. This year feels a little different, though. Maybe it's the snow blanketing everything, or the way the tree lights up the whole living room. Either way, it's cozy and warm, even when it's freezing outside. I'm really looking forward to seeing what Santa brings. I hope I get that new video game I've been wanting. But most of all, I can't wait to spend time with my family. We always have so much fun This past week was a good one for the plants. They started the first week of their stretch, and they've already grown a decent amount. I can really see them filling out. It's cool to watch them grow so fast. I can't wait to see how big they get by the end I always get a little worried at this stage, like they're not gonna get as big as I want them to. But then I remember how they always end up surprising me. By the end, they're always perfect.

Week 6 (1.22.26 --1.29.26) took photos on 1.27.26

WEEK 11 - FLOWERING: Final Resin Peak ​🌼 FLOWERING PROGRESS We have entered Week 11 (Week 7 of Flowering), and the Permanent Bluez is showing her full genetic potential. Even though she stayed very compact at 43 cm, the resin production is absolutely insane now. ❄️ The sugar leaves are completely covered in white frost, and the buds are starting to swell significantly under the heavy feeding schedule. ​📋 ENVIRONMENTAL CONTROL The environmental focus this week remains on maintaining a warm and dry climate to support the final hardening of the buds and to maximize trichome development. The day temperatures are averaging around 27°C with a relative humidity in the 45-50% range. These conditions are specifically chosen to prevent any moisture-related issues during the final ripening stage and to push the resin production to its limit. ​👃 TERPENES & AROMA The smell is becoming incredibly pungent this week. As the resin matures, the Permanent Bluez is developing a complex profile: a dominant, sharp gassy/diesel nose with a sweet berry undertone. Every time I open the tent, the aroma is overwhelming. The Top-Max is definitely doing its job in enhancing these heavy terpenes. ⛽🍇 ​💧 NUTRIENT FEEDING & WATERING I am maintaining the high-feed schedule to support the final swelling of the buds: Calmag: 1.5 ml/l to support metabolic functions. Acti-Vera: 5 ml/l for ongoing immune support. Bio-Heaven: 5 ml/l for nutrient uptake efficiency. Bio-Bloom: 4 ml/l to meet final phosphorus and potassium demands. Top-Max: 5 ml/l to boost terpene profile development. Bio-Grow: 1 ml/l for underlying plant vigor. ​Parameters: pH: 6.5 Humidity (RH): 50% Day Temp: 27°C ​💭 GROWER'S NOTE "Week 11 and the frost is real! ❄️ The smell is getting better every day, with those heavy gas and diesel notes really taking over. I'm keeping the environment warm and dry for the finish to ensure the highest possible resin quality and bud density. Quality over quantity, always! ☀️ Keep it IZI 💚"

Its been growing strong I will be tieing it down more later. I feed folllowing the week 3 bio bizz schedule so far so good, the plant seems to have responded well to topping 1 more week I think she will flower tho. As you can see in the pic there is 2 more new arrivals. So in the room now is, 2 x 420 fast bud orange sherbert, nearly done now. 1x barneys watermelon zkittles, day 24 1 x 420 fast bud purplelemonade day 1 1x barneys runtz day 1 There all autos, last lot of my seeds. After these I will be running some ethos photo periods. More pics to come Day 27, the watermelon zkittles is throwing out white pisstils now and is going into flower, I will start a new week tomorrow on day 28 as week 1 of flower. I will do a little defoloation today on it and get rid of all the inward facing and big fan leaves so she is ready for the next half of her journey. The orange sherberts are doing really well, stink of orange ice lollies, getting some purple coming thru now on them too. I have started feeding the plants 3 x a week like the biobizz schedule says, I make 4 litres to last the plant the week.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This is the first time for me growing an auto and Fastbuds genetics. I'm honestly surprised, this genetic is strong af and reacts very well with LST. The growing overall was really easy. Plagron and Biobizz nutriments are always on top! During flowering period the plant was really smelly, hash vibes. The charras that I've obtained after harvesting the plant was creamy and powerfull!

The three autos I continued to flush this week and turned off the lights on friday morning for the 48 hour of darkness before the harvesting. I have cut off all dead leaves and cut the stem of the plant and hanged upside down in the tent at 50% humidity. I have no lift scales to measure the weights of the plant but will update as it cures. Dr jack auto which is still outside the tent is doing well and now is under the more powerful light.

I tried budwashing for the first time. Went quite good. The buds are drying for the next 2 week

Hola con esta semana ya quedamos al dia con el seguimiento ya que estaba atrasado en el tiempo. Se nota una producción de resina notable en esta genética que nos ha gustado mucho por su olor y estructura de las plantas . hemos creado un video por cada una de las 14 plantas del seguimiento, hay varias muy llamativas que están "pre-seleccionadas" para mantener a futuro, el olor que se llega a sentir es muy florar y dulce, si tienen alguna pregunta no duden en preguntar saludos. Hello with this week we are already up to date with the follow-up since I was late in time. There is a remarkable resin production in this genetics that we liked a lot for its smell and structure of plants. We have created a video for each of the 14 floors of the follow-up, there are several very striking that are "pre-selected" to keep in the future, the smell you get to feel is very flowery and sweet, if you have any questions do not hesitate to Ask greetings.

Que pasa familia, última semana de floración de esta farm cheese de genofarm, y que decir, es increíble vaya aroma y vaya flores repletas de tricomas. Lleva su limpieza de raíces ,después se controló ph temperatura y humedad todo el cultivo, de principio a fin. Variedad de 10 para trabajar en indoor, ideal para SOG .

Videos explains it briefly how they look so on the environmental side I’ve only been monitoring RH and temps. They’ve been sitting at 55-60 RH and 80-82 F. I separated the 4 plants as they were now overlapping in the 2x2’ section. They were transplanted in 2 gallon pots last week and by the looks of the Beast at most 2 weeks and she will fill that pot no problemo. I need to get them to 5 gallons before switching to flower. It starts with good genetics I couldn’t be any happier with the Beast, still amazes me daily.

Wizard Fuel - Wizard Trees Day 70 - Watered with 3L of RO tap water with nutrients, mixed individually, in order and then pH'd to 6.3! She has completed her stretch phase, has developed her bud sites and is now focusing on bulking her flower 🙏🏻I removed a couple of fans leaves to improve general airflow in the tent 💪🏻 She has developed a good amount of trichomes on her buds and her smell has also started to appear - very gas earthy 👌🏻

This week I continued with LST and while I bend down my Kush on day 39, the stem bent over. I could fix it and within some days the plant repaired the injury quite well. At the end of the week I was surprised how good she handled this big stress. This is not the most beautiful of my plants but I love her like the other ones. 😍