Likes
Comments
Share
@Pechu420
Follow
Very fragrant. The buds are fat and beautiful, the colors are beautiful and the resin is making everything whiter and whiter. A few more weeks for her and then she will be harvested. The development is very good for a 3.7 liter pot (1 gal).
Likes
10
Share
@Aleks555
Follow
Срезал ёлочку утром . Шишки норма , трихомы 50% янтарь, не поливал 3 дня перед харвестом , 68 дней от семечки до харвеста. Вес пока не могу сказать так как целым кустом сушится , через недельку скину фото и видио что вышло на весах . 🌲🤝 , ещё хочу добавить- я использовал торфяной горшочек и это ошибка , может он не сторфа а с бумаги но он не растворился и корням было тяжело его пробить , не рекомендую использовать такой метод , на второй недели чветения поломали центральную колу и скажу что с ней все супер и она стала больше .
Likes
40
Share
@nijuana
Follow
Last days for this beast !! I'm flushing it , in 2 days she is done ✅ the buds are so big that I can take all on one pic 😅 ~5-10% are amber high quality pics bellow
Likes
29
Share
As of day 57 the grow is going well! I am more confident that the leaf yellowing is regular end of life changes at this point. The buds are putting on decent weight and the trichomes have mostly clouded over. It is entering the harvest window in my opinion, but I am going to wait another week or so before harvest and give it some time to ripen more. I have switched my feeding to a mild does of GO biothrive bloom which will finish the grow with primarily organic nutes through the last couple weeks. i will continue to fade down the nutrients as the plant is hitting the end of its life. Thanks for reading!
Likes
18
Share
•plaguicida foliar(ain grow) •poda baja(2do y 3er nudo) •1g de enhancer x litro de agua aplicacion en el riego
Processing
Likes
3
Share
These girls grew up really fast. My order of Recharge came in and I introduced that on day 10. I think I did a gram of Recharge mixed into 1L of PH'd water and then that was split between the two plants. On day 12 I decided that because the FCxFS was already starting to lean to one side I would go ahead and just LST it over. I'd never done LST before and ended up using way too much wire and probably did more damage than good. On day 13 I removed the hack job I did and instead used the wire for supporting the main stem. This is what I should have done from the start. Lesson learned.
Likes
7
Share
Not doing too bad but the buds aren’t that fat unfortunately. I’ve got 1 nice pheno and the rest just smell fairly floral. I’m sure it’ll be nice smoke but there isn’t anything jumping out at me on this one.
Likes
10
Share
Still cooking strong. Did a heavy defoliation after these pics. But really just letting em be crazy ha. This strain is super hearty, excited to see what the next few weeks bring. Really starting to show signs of flower no been on 12/12 for about 10 days. Thanks for stopping by and as always 🍻
Likes
28
Share
05/31/2024 : flowering week 8, almost done but BB isn't full yellow yet and there are still too much clear TC on flowers. I may harvest main colas at the end of this week and let the rest for another week... or cut everything and make some bubble hash with lower parts. Anyway, it smells very good now! 😁 06/03/2024 : as top buds were foxtailing, I cut everything that turned purple and got almost 240g wet material (now in dryer for about a week). I reset LED to 30cm from new flat canopy, with DLI 36~45. There are still a lot of buds to come!😍
Likes
51
Share
2/17/24 - Day 103 - The flush starts today! By Thursday I'll be giving her the chop. 2/19/24 - Day 105 - Flush is going well. Buds are still plumping up nicely. 2/21/24 - Day 107 - Ok this is the last day shes at the end of the Flush. Ill start a new week tomorrow, when I open the box up at 9am its chop time! I spent the day preparing, cleaning my workspace. Gathering all my tools, gloves, drying racks, etc. Here are the last pictures you guys are going to see of her growing. Enjoy!
Likes
25
Share
Hey everyone 😃. This week she has done great 👍. It was done again on all the drifted topping and sprayed one last time with neem oil so that the last trips are finally gone 😁. We haven't had any pests for so many years and all of a sudden we have such little shit parts 😅. This week it was poured twice with 1.2 l of water. GHSC enhancer was added during a pouring (1 g per l) The tent was cleaned every day this week and the plants were checked for health. The humidifier is filled once a day. Next week I will decide how I will continue the training because I have space again in the flower tent 😀. This week I'll decide whether it goes straight into the flower tent or is pruned again. Until then, I wish you and your families a good start into the new year 2021 🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : www.Zamnesia.com Type: Purple Punch ☝️🏼 Genetics: Granddaddy Purple x Larry OG 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
10
Share
Day 58 : She started to fatten her buds. Also she has a small nitrogen deficiency. I think she will be ok. Nutrients added to water, CO2 stopped for all ladies. Edit (Day 62) : I watered again with nutrients, so to be ok with nitrogen. It seems that she faced the lack. I believe she will be that chop chop.
Processing
Likes
16
Share
I have introduced a second bottle of CO2 to pump flowering weeks, I have cut off nutrients completely to get rid of nutes burn, plants are been fed PH water only. For this run I have been using a DIY automated drip system that cost me less than $100, this system can be used to feed up to 10 plants, now I can go way for days without a worry :) if anyone is interested here is my Instagram video: https://www.instagram.com/p/Bwm1kO0BTNC/?utm_source=ig_web_copy_link Stay Lit folks 👩‍🌾🏻
Likes
6
Share
@MrPipi
Follow
Mr. Pipi has only friends with bad Noses. No one can smell the Wild Strawberries...nontheless... looks so gooood... Biggie, Biggie, Biggie can´t you see? Day89: What can Pipi say. Every other Day some Calmag... a little bittle topDress yesterday. Pipi´s thoughts are this is girl vegged 9 Weeks and is in an 8 Liter fabric Pot. Couldn´t transplant her, but Topped and trained her. So i want Biggie Buddies, so since she´s in Flower week 3/4 that´s my last Chance to enrich the soil with dry nutrients for them to dissolve mostly and i can 'flush'. So i wanna feed her more than the 8 Litres could hold, but carefully and step by step. And just a little. No Pipi was used on this plant.
Likes
20
Share
Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.
Likes
3
Share
Likes
48
Share
@Aleks555
Follow
Hello everyone. We have an interesting phenomenon here. Droplets resembling glue have appeared on the buds, similar to the resin found on fruit trees. If you know what this is, please let us know. If not, stay tuned as we figure out what it is and whether it's a positive or negative development.
Likes
6
Share