The 7th week started. Based on the Breeder's description it is supposed to be the final week for The Gelato Cookie D'ohpe so it should be ready to harvest. It is my first grow but I can say it needs a minimum of 2 weeks to be ready. I think 10 weeks at least. I have checked another diary with the same strain and it took 10-12 weeks to be finished. I placed the Purple Punch 38 hours Darkness so from now I will give 14 hours darkness and 10 hours light schedule to start flowering. They are in the same tent so I take out in the morning to be in darkness, and put back at night. I did reset the timers. Water: 125 ml 2x daily each plant so altogether 250ml a day for 2 plants. I raise up every week with 50 ml a week per plant. Fertilization the same amount of water the same acacia honey around 2 big spoons and bat guano 1 teaspoon per 1-liter water and I fertilize it 3 times a week every second day on Monday, Wednesday, Friday, plus one-half day like on Saturday once. So from today (Thursday), I started forcing the feminized strain Purple Punch to flower also after 45 days from germination. This week not too much things to say. The Gelato Cookie D'ohpe stopped growing just added an extra 5 cm to its height. Hopefully it focuses on the bigger buds creation. Purple Punch grew an extra 2 cm. End of the week Purple Punch is 37 cm, Gelato Cookie D'ohpe is 70cm.

unreal 👌🏻👌🏻👌🏻 despite the high temperatures, it's incredible❤️

💚Please Like This Diary and Leave a Comment!💚 pH @ 6.8 Plants grow nicely and are strong! No Nutritions until flowering start. Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💸💸💸Wanna Try Red Wine from Seeds Genetics?💸💸💸 https://seedsgenetics.nl/product/red-wine-gefeminiseerd/

The Cali Deli was a blast to grow and chop down. It's the most vigorous plant I've grown so far. I also never seen these kind of mammoth leafs compared to anything I've grown thus far! Great looking and great smelling pheno! Def recommend it!

Buds came out very good for being on a 12 an 12 cycle

Hi everyone 😎. Everything is going great 🤗 You look very healthy and feel very comfortable. This week I trimmed everything underneath and cleaned everything :-) All spare parts were replaced, as after a while from using the aero tool all the screw threads were bruised. At the same time, the entire tank was emptied, cleaned, and freshly filled this time with flower fertilizer :-) this week the stretch will decrease and the energy will be put into the flower production. I have with clean up take the chance right away, and take photos of the root carpet ich At the moment I am considering getting a CO2 system for the Aero tent, because I used to have one, but it had to be given when the boxes were not moving :-( Otherwise I wish everyone a nice weekend, and health for you and your families in this scheis corona time 😷 Let it grow 😎

So this plant was a dream, stayed so lush and healthy throughout, grew tallish, strong really bobbly, swollen calyx structure to the buds, really sparkly with crystals, just lovely. Smell is fruity and pungent, impressive yield, just great.

Day 22 to 28 from seed # Day 24: - After flushing then going away for 3 days, FR1 is looking much better....I think. - Did some LST, bud sites are reaching out. Will continue throughout the week. - 3/4 of them are showing preflower pistils. Expect FR2 to show some soon too. - Still on last weeks schedule # Day 26: - The Nutrient Chart listed for this week starts on this day. I fed @ 310ppm using water phd @ 6.1 on all excluding FR1 (big girl) - Flushed FR1 again - I flushed the 5G pot with 10G of water @ 5.8ph . I should have flushed more water through it before I left, but alas... # Lights: 24,000 - 26,000 Lux

Новая неделя пошла, докупил BatBoost, потому что как мне кажется есть небольшая нехватка калия наровне с передозом фосфора. Видимо я переборщил с экстрактом и порошком. Буду умнее. Последний полив был просто вода. Вроде девочкам лучше. Да. По мимо всего прочего из за передозировки фосфором вылезли дефициты цинка магния и железа. Постараюсь выправить ситуацию энзимами и порцией микроэлементов. Вроде приходят в себя девочки. Наблюдаем дальше

Nice buds but the Werther is 28 to 39 degrees so it Hot dry very fast. Not good it lost a lot of terps.

Week 8 - Bolt 2 (Flower Week 2) SB4Q - BOG Sour Bubble (BOG Bubble BX2) Sour Bubble - BOG Seeds (BOG Bubble x BOG Bubble) Harvest Window: Early Harvest: 52 ± 5 Days (7.4 Flower Weeks) 8 - 18 March 2023 or Late Harvest: 84 ± 5 Days in Flower (12 Week Flowering) 7 - 17 April 2023 Veg Week Start of Week: [ 2023-02-08, BSBQ4 56:F:9:1] End of Week: [ 2023-02-14, SB4Q 62:F:9:7] HeightWeekStart: [ 8.5, in] HeightWeekEnd: [ 9.0, in] #Last Topping GERMINATION: 2022-12-16T14:25:51-0600 Week’s Environment TempAvgMaxMin: [ x, y, z, °F] RHAvgMaxMin: [ x, y, z, %] VPDAvgMaxMin: [ x, y, z, kPa] LightDistance: [ 21.5, in] LightDimmer: [ 50 + 2 ticks, %] LightPPFD: [ 786, µmol/m2/s] # 2/3 the way to 1000 PPFD at the center ~r ReservoirTemperature: [ 56.5, ±1.5, °F] Fertigation The Rooted Leaf Hydro Chart: - [ Primer A, 8.6, ml, gal] - [ Primer B, 8.6, ml, gal] - [ Silica Skin, 4.3, ml, gal] - EC: 2.5 13, 13, 6.5 pA, pB, Ss, Lush green 4.3, 4.3, 3.25, 3 7, 7, 3.5 Fertigation The Rooted Leaf Hydro Chart: - [ Primer A, 28, ml, 3 gal] - [ Primer B, 28 ml, 3 gal] - [ Silica Skin, 13, ml, 3 gal] The Rooted Leaf Foliar Chart: Monday: Solar Rain: 20, ml, gal Silica Skin: 20, ml, gal Mammoth-P: [ 3, drops, pt] Wednesday: CalMag Fuel: 20, ml, gal Lush Green: 5, ml, gal Mammoth-P: [ 3, drops, pt] Friday: Solar Rain: 20, ml, gal Mammoth-P: [ 3, drops, pt] Peak Bloom: 5, ml, gal ___________________ Wed 08 February 2023 BSBQ4 56:F:9:1, 6:B:1:6 Thu 09 February 2023 BSBQ4 57:F:9:1, 7:B:1:7 Fri 10 February 2023 BSBQ4 57:F:9:1, 8:B:2:1 Sat 11 February 2023 BSBQ4 57:F:9:1, 9:B:2:2 Sun 12 February 2023 BSBQ4 57:F:9:1, 10:B:2:3  - Defoliated 3rd Node Fans, as they were hanging and blocking understory air flow - Installed Copper Core Wire trainers to spread final 2 nodes of 4 meristems. - Raised Lamp to LightDistance: [ 14.5, in] - Adjusted dimmer to yield - Center: [ 885, µmol/m2/s] - Corners: [ 530, µmol/m2/s]   ___________________ Mon 13 February 2023 BSBQ4 57:F:9:1, 11:B:2:4 Tue 14 February 2023 BSBQ4 57:F:9:1, 12:B:2:5

Last week of her life.

Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

1 month and they are growing.

3/4/2023 Week 3- Day 1 of Veg (Day 31 overall) Water Change out Day 36 Gallons in CalMag = .5Mil/Gal = 18Mil FloraMicro = 4.2Mil/Gal = 151Mil FloraGrow = 3.8Mil/Gal = 137Mil FloraBloom = 3.0Mil/Gal = 108Mil PH DOWN = 1.72Mil/Gal = 62Mil PPM = 546 PH = 5.88 This Grow has definitely been an interesting grow I have been playing with Over or Under since the beginning and it all started with me drowning the plants by adding too much water. I will have to make sure I watch that on all my future grows. I prayerful that this week will get me fully back on track, in my previous grows using my chart, I haven't had any issues during this week, so again prayerful that this is the week I am back on point. 3/5/2023 Week 3- Day 2 of Veg (Day 32 overall) ROOT ROT!!! I guess from when I drowned it I caused a lurking issue that really showed it's head today. The roots were looking not slightly bleached but looking black. I cut out what looked dead and I had to run to the local Hydro shop to pick up some items to see if I can fix it and strengthen the plants. I picked up Mammoth Silica, ORCA, and ROOT Drip. I completely drained the system and started it over today as well. 38 Gallons In Mammoth Silica = .5Mil/Gal = 19Mil CalMag= .5Mil/Gal = 19Mil Root Drip = 1Mil/Gal = 38Mil FloraMicro = 4.2Mil/Gal = 160Mil FloraGro = 3.8Mil/Gal = 144Mil FloraBloom = 3.0Mil/Gal = 114Mil Orca = .5Mil/Gal = 19Mil PH Down 60 Mil = PH 5.83 I also had to run by Staples I realized the paper I was using wasn't the right brightness and Lbs for the Photon App. What I needed to have 22Lbs 98 Bright. I recently saw a comparison of the different weight papers against a several hundred dollar Apage PPFD detector and with the right paper it was almost exact readings. With that my PPFD 355. 3/6/2023 Week 3- Day 3 of Veg (Day 33 overall) Still alive!! #2 and #3 are still alive and it looks like no further damage to any of the leaves. #2 needed 1 node topped. I will keep monitoring day to day. 3/7/2023 Week 3- Day 3 of Veg (Day 34 overall) Well Both appear to be doing all right. I cut off the offensive leaves from #3 nothing new on shown on the leaves. I actually needed to top 1 node on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. 3/8/2023 Week 3- Day 4 of Veg (Day 35 overall) Well Both appear to be doing all right. I actually needed to top 1 node on #3 and 2 on #2. PH is stable, Temps are stable.. I will be changing out the water and Nutes on Saturday not waiting the 2 weeks. I think the additives are truly making a difference I think I will be adding them to all my grows from here on out. 3/9/2023 Week 3- Day 5 of Veg (Day 36 overall) Both still appear to be on the mend Still some dark brown on a small part of the roots and I don't know if those are just dead but it doesn't look like it is spreading and I see a bunch of new roots forming. Nothing new on the leaves at all. So I think the trio that I added is helping. The plants also seem to be in raised happy position going towards the light. I still plan to change the water on Saturday and go from there. 3/10/2023 Week 3- Day 6 of Veg (Day 37 overall) Moved the light up to 41 1/2" so 3' 4 1/2" away from the top of the Plants. PPFD= 363 Power on my Light =62.5 Water Temp is holding steady=70.3 PPM= 534 PH= 5.92 Tent Temp= 72.5 Humidity= 50-60% I have 2 humidifiers running on INK Bird controllers monitoring it 24/7. I will be changing out the water tomorrow even though I could let it go an extra week but I am still concerned that the Root Rot is clearing up and I don't want to risk it coming back. I want fresh Nutes/ water in the tanks. I topped 2 nodes on #3 I topped 3 Nodes on #2 I also cleaned out some of the bottom third portion that isn't getting much light and not much growth at all. #2: 8 1/2" tall, 18" Wide #3: 7 1/2" Tall, 15" Wide

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Very good production!!