This week has been easy just like any other, how ever i did get one broken branch i did try to fix it but i don't think it will make it

Chopped the purple fruit/diesel smelling plant

if u wanna skip details just read the CAP LETTERS day 29 - januari 2 waterleaves from under the stems got cut off, also trimmed the lowest branches because the leaves were getting too big the soil plant has gotten no trim or cuts at all day 31 the ph of the res was 5.3 i changed water , roots look brown, not rotten or slimy just brown. day 32 the hydro plant gets healthy growth after the water change. ph is still too low (5.5) im waiting for my *PH up* i ordered online. never tought i would need it lol. she goes well on 5.5 but not enough calmag is absorbed like it does on 6.2 The pictures of day 32 display the difference is very big in the stems, the soil plant only got topped while the hydro plant had already a litle trim on the lowest branches and the branches above (in the midle of the bush where i topped them) so she got more stress and still is bigger then the soil. day 33 i got no ph up (for now yikes) sooooo i took 8 liters out of the res and replaced it with pure rainwater and 170 ppm calmag in it without nutrients to keep the acid level a bit higher. it worked as u can see in the final pictures the plant gets new growth a bit faster. ph up should be here by end of the week. day 35: plant start to stretch finnally, while i was doing LST later in the evening one of the top stems just snapped off completely OOOPS 😆. theres still a lot of branching going on and a nice bush she will recover very fast from this loss as i summoned the Cannabis Gods into my room as the planets lined up and perfected my PH up to 6 by adding the purest rainwater from the universe the roots cleaned themselves back to pearlwhite and started absorbing the nutes faster then ever. in all silence i knew this was my destiny and the stems grew so fast i could hear them grow. the whole experience was too much as i collapsed to the ground and stood up left the room and knew... i would never see these ph and calmag problems ever again and went down the stairs with my new powers THE PLANTS BOTH GOT GERMINATED ON SAME DATE. BOTH GOT TOPPED ON SAME NODE. I WAS FORCED TO TRIM 4 BRANCHES OF THE HYDROPLANT BECAUS IS WAS BLOCKING TOO MUCH LIGHT I ALSO CUT OFF THE 4 BIGGEST WATERLEAVES ON THE MAIN STEM. THE SOILPLANT DID NOT NEED ANY TRIMS AS SHE IS NOT GROWING AT AN INSANE SPEED, HOWEVER THE SOIL PLANT LOOKS HEALTHIER AND BIGGER BECAUSE THE FANLEAVES ARE STILL THERE. IF U WATCH THE STEMS IN THE PICTURES OF DAY 32 U CAN CLEARLY SEE THE HYDRO IS WAY BIGGER. I NEED TO CORRECT MY PH SO SHE ABSORBS MORE CALCIUM MAGNESIUM FOR EXPLOSIVE GROWTH.

Nothing added this week other than a compost teas with freshly cut alfalfa & fenugreek with a little frass. Growing very fast and very well

Día 9 (10/06) N/A Día 10 (11/06) N/A Día 11 (12/06) Llueve mucho. Humedad alta por aquí. Eso les favorece Día 12 (13/06) Se empiezan a desarrollar las hojas verdaderas a una buena velocidad! Todo en marcha! 💨 Día 13 (14/06) Riego ligero 100 ml sólo H20 EC 0,5 en previsión del trasplante en el día 15 de la planta Día 14 (15/06) Se nota que estamos en el día 14 desde germinación y la mayoría de las plántulas van viento en popa! Día 15 (16/06) Hoy procedemos a trasplantar a las chicas a su maceta intermedia de 6,5 litros Se prepara con 5,5 Litros (85%) de sustrato PRO-MIX HP BACILLUS+MYCORRHIZAE + 1 Litro de Insect Frass (15%) + 65 gramos de Earth Vibes Super Soil (10 g/L substrato) Se llena la maceta de sustrato con las manos (limpias) y rompiendo los trozos más gruesos, para que el sustrato esté aireado y esponjoso, sin presionar Se coloca una maceta vacía de 1L para que quede la forma perfecta de la maceta donde están las plántulas (ver fotos) Se espolvorea la parte proporcional de la probeta de microorganismos sobre el agujero de trasplante Se saca la plántula de su maceta actual (bonitas raíces 😍) y se coloca en la maceta final Se riega muy lentamente hasta percolación profunda con H2O EC 0,5 pH 6,5 Se coloca mulch (acolchado) de paja para evitar traspiración excesiva y cuidar a los microorganismos del suelo A ver como reacciona al trasplante! 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Idhdb

estamos no 6° dia de 12/12 por aqui, ela está crescendo muito e tomando muita água. Esperar mais uns 10 dias pra fazer uma limpeza de folhas e seguir no MiP mais uma semana. já comecei a usar JLF ( jadam) faz 10 dias pra suprir algo que possa faltar. estou gostando demais do desenvolvimento dela.

Fantastico perfect tree in fatto di odori e colori non si smentisce i fiori stanno ingrossando da dio belli resinosi e duri come la pietra siamo quasi all’arrivo 😍

Die Auto Candy Bubatz ist reif für die Ernte. sie hat in der letzten heißen Woche ihre Blüten ausreifen lassen. Mit dem ersten Hochnebel des Jahres steigt auch die Schimmelanfälligkeit und somit werde ich sie heute schneiden. Der Erntebericht und weitere Fotos werden folgen. Vielen Dank an Dutch Passion, dass ich an diesem Contest teilnehmen konnte. Ich habe Einiges über Autoflowers dazugelernt, sodass mir keine mehr vollständig verschimmelt ist, was leider letztes Jahr geschehen ist. Die Bubatz riecht jetzt sehr süß, etwas minzig, würzig. Richtig super einfach war es jedoch nicht, sie durch die Schlechtwetterperiode im Sommer zu bekommen. Autoflower sind keine Selbstläufer. Ich freue mich bereits auf den ersten Genuss. Zuallererst wird ihr Duft beim Trocknen durch die Wohnung ziehen, auch bereits ein Event. --- The Auto Candy Bubatz is ready for harvest. It has allowed its flowers to mature during the last hot week. With the first high fog of the year, the susceptibility to mold also increases, so I will cut it today. The harvest report and more photos will follow. Many thanks to Dutch Passion for allowing me to participate in this contest. I learned a lot about autoflowers, so none of them got completely moldy, which unfortunately happened last year. The Bubatz now smells very sweet, a little minty, spicy. However, it wasn't really that easy to get it through the bad weather period in the summer. Autoflowers are not a sure-fire success. I'm already looking forward to enjoying them for the first time. First of all, their scent will waft through the apartment as they dry, which is an event in itself.

There is very little to do with the plants, they are getting fatter by the day and frostier by the day. I found out I was giving them way too much nutrient so I started giving them 0.4 EC less (its still a work in progress). The lights are still on 85%. It is starting to smell more and more sour and there is also a fresh lemon smell coming from it now.

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush

She's grown 18cm this week! Entered flowering too. Looking lovely!!! Very cute. A mini weed plant 😂 😍

I could have pushed the plant one week longer but im on a scedule

Ill write from pc but as im trying to add a new nutrient i need to see if bulk ups without od The update, and some source of knowledge - sadly the product is not registered . https://www.growbaratochile.cl/thc-fertilizantes/sales-de-epson.html https://www.royalqueenseeds.com/blog-epsom-salts-a-natural-hack-to-grow-healthy-cannabis-plants-n837 Thus: big gas leaks homies have nice halloween, the reason i'd flooded with photo this week was i needed to record any negative reaction caused by the incorporation of epson salts on the watering as i understand this shit also adds sulphur and be spreaded on soil for slow release, fixing too light or weakened soils , something i can't do with cal mag from bac, but that product has other sceneario where i can both water or spray on veg until early flowering so i wanted to try it but i didn't know the ratio, and the purposed spoon i used it on 1.5lt of water on 9 x 11lt Killer Kush that were soft to mild on specific carencies , additionaly, of using a very demanding food schema by boosters can accentuate the lack of specific nutrients like Calcium and Magnesium , so this add thick kick of Mg prevention as it pretty neat it's understanding, except on instructing the dosage and application. I did some barrier as is the last week i can do foliar spray as these bastards but furthermore is really a red flag as u can create the conditions for contract some fungi. By a lot of having still figuring out the perfection of both illumination & thermals , still trying to enhance the light spectrum , and doing the first interaction with uv exposition to check that plants dont stress or physically burn, as i want to do the uv shit for late flowering as i expect by genetics this shit SHOULD BE A QUICK FLOWERING so, im entering to late flowering and do it for entire 4 weeks and then consider if plants show that are ripe enough, considering there is a quick underdeveloped automatic at bottom on a 12/12 scenario, and thus that motherfucker will not be forgiven by it unstability of this batch. 👻 Also i noticed i had slight fox-tailing that was quite provoked by messed up outside weather, so i still may need to ellaborate on lights to prevent excess of generated heat as well, as can incur in some penalty . I have a faint idea how to deal with as HEAT HERE WILL BE HELL.

What's up Growmies 🤟🏽 Welcome back to another week #10 overall and #3 flowering. She is doing well and continue to stack on buds, I continue to fed her the same schedule and dosage of nutes, it seems to be working well. Everything seems to be going well so far nothing new to report, until next week my friends Happy growing and may the grow goddesses bless you all with a bountiful harvest!

Will update after dry and cure - great yield and prob the highest for fast buds for me this year. Nice resinous sticky buds :) 10/10

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.

Venga familia que ya viene la cosecha de estas apollo black cherry de Seedstockers, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte se ven bien resinosas. a sido una genética con la que disfruté mucho cultivarla, es algo complicada cultivarla pero merece la pena si eres cultivador con experiencia no te será problema cosechar. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.

It looks terrible, but they are plants and resist a lot 😁😁😁 after 2 Days it looks better ... now its time for grow... Equipment: Controller AC Infinity Pro - connector for the external light control, RJ-12 - 2 plugs with which I can control dehumidifier and humidifier. - 2 fans run 24/7, 1 Oscillating from spider farmer Light - 18/6 h PPFD - 500-600 nmol DLI - 40-45 VPD - 0,9 - 1,0