We are in Flush !! Was giving them GH Flora series + rapid start + cal mag

Started the first top dressing of Gaia Green All Purpose and Power Bloom at a 50/50 ratio of 1tbsp/gal each.

Day 1 - topped FR1 Day 2 - topped FR2 Day 3 - 2nd topping of FR1 Day 5 watering ,light LST for initial main stems on FR2

3/19 230pm I just got the three new ones and I’m really excited to start them. I’ll be using Cannakan for germination 3pm That was easy all done. 3/20 12am almost ready. 2am poured out the water put in new distilled water below the notch and we are good to go. Set at 88 for 78 target. 130 pm I got the dirt work finished. It’s the part that I hate the most. I try to keep it as clean as I can. They are ready to go. I’ll be putting them in the dirt in a little bit.👍👍👍 3/21 1am..... going to see if they woke up.. I put the dirt in without much mess. The dirt is clean and easy to work with. I poured CAREFULLY in lines in both directions of a red party cup of Rapid Start and pH 6.5 each💦. nothing yet, but gnats... 3/22 Surgery was a success times 3!!!! All delivered happy and healthy!!!!! 3/23 12 am looking great!!!

📍 Microgenetics meets Master Bud – Delicate but determined The Papaya Sunrise, an exclusive selection of the very Italian Microgenetics Seed Bank, continues to amaze me. In this 7ª week of vegetative he is finally bringing out all his fruity, vigorous and surprisingly compact personality. At first she was the most reserved among the sisters, but now - thanks to the controlled environment, the targeted defoliation and the balanced diet - she is exploding in width, opening the branches like palm trees in the sun, ready to conquer the SCROG network. 🌿 The leaves are wide, healthy, full green and vital. The structure is solid but elastic, and each knot carries with it a promise of future flowers. 💧 This week received the right attention: enriched rainwater, high-quality radical stimulators and a mix between mineral (Advanced Nutrients pH Perfect) and calibrated organic inputs. Result? Vigorous lateral growth, excellent breathability, zero deficiencies. Despite some residual moisture in the pot that I monitored, the Papaya reacted very well, confirming its resilience. The improved microclimate and new ventilation helped it open up like a true tropical queen. 🎯 Now everything is ready for the last sprint before the switch. The tucks are on the way. The genetic profile begins to "push", and you can already feel the aromatic potential that will come out in a few weeks. 📸 Exotic fruits on the way. This Papaya is not a plant. It's a destination.

This one is definitely taking her time but its looking like the end product will be worth the wait, im getting an almost lemony aroma from the tent now. Edit: 5 days on I've just started the flush since trichs are turning cloudy.

🎩🌈🍬

They have took to the flip to 12/12 straight away and have shot up 40cm each pistols are popping out everywhere .

Started training the main stems towards the corners. Pulled the runt and actually wanted to pull the second runt, but the roots of the two left plants are tangled and I didn't want to damage the healthy plant. Started lst with pipe cleaners

Still as hot and dry as I've ever seen and she loves every minute of it. All the fimming has lead to this beautiful bushy shape I've been going for. Did some light defoliating, which is crazy early for me. She's nearly 3 times the size I'm used to for this time of the year. I cannot wait to see how big she'll be by Oct. Nothing but 2 hours of drip and my regular Neem/Aloe/Kelp/Epsom folar spray this week. She's been so incredibly easy to deal with, really love Blueberry. Had a MUCH welcome 6mm of rain one night as well.

😎 ******************************************** Week 15 Ripen(week 11 flower) ******************************************** Light cycle=12/12 Light Power=110w 47% Extractor controller settings (during lights on). High temp= 26c Temp step=0c High Rh= 46% Rh step=0% Speed max=10 Speed min=3 Extractor controller settings (during lights off). High temp= 20c Temp step=0c High Rh= 50% Rh step=0% Speed max=10 Speed min=3 Smart controller settings (during lights on). Lights on=9.00am Smart controller settings (during lights off). Lights off=9.00pm VPD aim=1.0-1.5 DLI aim=40-45 EC aim=1.0-1.8 PH aim=6.0-6.5 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 NPK= 0-9-10 Method= Automatic Feed=Ripen nutes Neutralise=0.1ml/L Plagron Power buds=1ml/L Green Sensation=1ml/L Easy Ph down=0ml/L (1ml=24 drops, 1 drop=0.04ml) Easy Ph Up=0.0ml/L (1ml=24 drops, each drop is 0.04ml) Ec=0.7 PH=6.5/6.2 Runs=10 Run times=3mins (0.75L/0.375L each) Gap times= 17mins Total runtime=24mins(6.0L/3.0L each) Total flowrate= 0.25L/min(0.125L/min each) Auto start time=10.00am Auto stop time=1.03pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅17/5/25 Saturday(Day 99) 📋 📅18/5/25 Sunday(Day 100) 📋 📅19/5/25 Monday(Day 101) 📋 💧 Manually Ripen nutes Ec=0.7 PH=6.5/6.4 Volume=6L Volume left=1.5L Volume used=4.5L Total runoff=0.6L Ec=2.0 PH=/6.7 💧 📅20/5/25 Tuesday(Day 102) 📋 📅21/5/25 Wednesday(Day 103) 📋 📅22/5/25 Thursday(Day 104) 📋 📅23/5/25 Friday(Day 105) 📋 Day 77 of flower 💧 Manually Ripen nutes Ec=0.7 PH=6.5/6.4 Volume=6L Volume left=2L Volume used=4L Total runoff=0.5L Ec=2.7 PH=/6.9 💧 ******************************************** Weekly roundup. 📋 This girl is massive, I've not had a plant produce flowers this big for a long time. The other strain is finished and Fat bastard still has a bit more maturing to do. She will have the tent to herself for the remainder of the grow. Back soon. Take it easy. ********************************************

Hi everyone! Sorry for the late post I've had a lot of personal crap holding me back but I'm on the bounce back and trying to catch up with everything. Couple lessons learnt on this one. I'm going to run this strain again but a little differently based on experience from this grow, the plants were ready at week 8 barring flush so I reckon I can cut away two weeks of flower time and start my plain water flush at week 7 and chop at week 8 instead of 10 which will be great as I will be adding at least one but most likely two of those weeks to the veg time so my turnaround will be the same but my end yield should hopefully be much better. This grow is by far my best quality end product, hard nugs, caked in trichs, stinky as hell water and strong as a Russian circus freak. Yield however was not as expected from 2 meter squared using a 600w hps and 450w Ied I wanted 20-25 oz and I got 15 but I know where I went wrong as previously mentioned and I have set a challenge to do it again hitting 25oz, same strain, same system, same nutes, 1 extra plant, 1-2 weeks extra veg time and 1-2 weeks less flower time. What's everyone reckon? Any holes in this plan? Like the look of my end product? Got a question? Comment below! Thanks everyone for looking in its always my pleasure! Peace and love Fire_Farmer🔥👨‍🌾

Semana 14, 9 de flora se añadió CO2 y se nota mucho la estimulación. Lavado de raíz listo 🤩 aunque solo alimentamos con agua,CO2,luz. Todavía tengo una duda después del secado le daré un curado con madera CEDRO ( caja casera ) , después daré una opinión sobre esta cata. Recuerden que hay elementos en específico que tienen que ser adquiridos como "producto" obligatoriamente y otros que no es necesario gastar. El método CO2 es bastante efectivo y solo con levadura azúcar y agua. Una observación muy importante es que encontré un cm2 de moho , atentos a este factor. De todas formas nunca me mostraron algo de moho pudo haber Sido un error mio en el proceso de lavado de raíz. Rastafaraaaaah🌴🌴🌴

Plants have stretched more than i thought. Been trying to fill out the screen as best as i can, some have worked better than others. Looks like there are plenty of bud sights. Began pk heavy this week so looking forwsrd to seeing them fatten up. I also gave a light defoliation under the canopy removing skinny stretchy stems receiving little light. I also removed some massive fan leaves that were blocking light from budsights. Not too many just enough to have light penetrate.

mimosa has become very big, I can clearly smell the orange. I will harvest next week, this week I cut off all the food flow, only water will be given 3 times,, I will leave the blue gelato 41 for 1 week longer.

Day 50 😍welcome to week 7 😃👌 Day 51 i like the colorchange 😍🙏👍

IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

1/9 Both finally transplanted to 7gal Fabric pots. Plant 2 is doing really well, no stopping her now!! Plant 1 is doing slightly better than she was, going to give a slight defoliation over the coming week and hope she picks up. 2/9 plant 1 is slowly getting her shit together I think, I'm going to leave her be as much as I can this week. Plant 2 is doing me proud, recovered well after transplant/topping I'm going to continue training her as I see fit. 3/9 #2 has been fed today, nothing for #1. #1 is slowly getting there now, #2 is still going strong as ever💪 I think I may take a few clones off her soon 4/9 been noticing a few wet patches the past couple of days, had a biting a trim and will continue to do so as needed. Plant 1 is starting to do her thing now too, plant 2 going string as usual. Both have had a little trim ....can't remember if i watered or fed today 😂 5/9 no comment today, tired out 6/9 plant 1 doing well now, shes starting to look quite hungry sevill give her a feed tomorrow of the easy boost 123 combo. Plant 2 doing her thing as usual 💚

Entering the second week full of doubts, are they stunted? I transplanted four of them into 8 l airmax pot.Also a little bit of something similar to mold appeared on the seed shells (grey little hairs).Can it be the mycorrhiza? I began adding Royal calk, cause i heard and readed that the autos need it since the begining(this one is susprisingly concentrated) and inoculatethe first time with the microbe photosynthesis plus,3 ml/l the first time and 1,5ml/l the next weeks along with a sugar application once a week in order to feed the microbes and fungi from the floor.