29дней Сделал дефолиацию и растянул ветки. Сегодня впервые внёс Удобрения. Жижа универсальная 1.4г/л.,бад монстр 2мл/л по листу.

*Early Flower 09/10* (2) Fastbuds - Mimosa Cake Auto Aggressive LST was applied for even light coverage. Smaller-Lagging budsites and bigger fan leaves under net have been removed. Slight increase in nutrient feeds, thus far 0 signals of deficiencies. *Mid week update - 09/13* Both plants have grown approximately 6 inches in height Early flowering continuing to progress accordingly Half a gallon increase in water feed (Nutes included) *End of week recap 09/16* Mimosa Cake (Auto) - Both in week flowering accordingly Small increase on nute feeds - Moderate increase in filtered plain water feed (1.5 gallons ) *SEE END OF WEEK RECAP VIDEO*

Greetings, fellow cultivators! It's time for the Week 6 from Seed and Week 2 Flower Report on our illustrious Epsilon F1, and the journey of green excellence continues to unfold. Our botanical champion is now fully immersed in the flowering phase, and let me tell you, the spectacle is nothing short of breathtaking. In this pivotal week, our Epsilon F1 has truly come into her own, showcasing the beauty and resilience that only a seasoned grower can appreciate. The transition from veg to flower has been seamless, a testament to the meticulous care and attention lavished upon her. As we delve deeper into the flowering phase, our guiding hand remains steady, ensuring our green queen stays low and wide, maximizing light penetration and promoting an even canopy. It's a delicate dance of cultivation, a choreography that promises a bountiful harvest of botanical splendor. The environment continues to be a haven of stability, with room temperatures and humidity maintained at optimal levels. Consistency is key, providing our Epsilon F1 with the perfect conditions to thrive and flourish. Now, let's talk nutrients! The Aptus Holland super soil mix continues to be the cornerstone of our feeding regimen, providing a symphony of nutrients that nourish our plant from root to tip. Micromix Soil, Substrate Buffer Powder, All-in-One Pellet – it's the nutritional trifecta that ensures our Epsilon F1 remains healthy and vibrant. But that's not all! Our foliar friend, NutriSpray, makes a triumphant return, showering our green goddess with a gentle rain of nutrients. This foliar feast not only provides essential microelements but also leaves a protective coating on the leaves, safeguarding against environmental stressors and promoting overall plant health. And let's not forget our trusty sidekick, Mycor Mix. This microbial powerhouse continues to work its magic in the root zone, fostering a symbiotic relationship that enhances nutrient uptake and promotes root health. Our Epsilon F1 is not just a plant; she's a botanical masterpiece in the making. Shout-outs to Royal Queen Seeds for the genetics that continue to dazzle, and heartfelt gratitude to Aptus Holland for crafting nutrients that elevate our grow space to new heights of green excellence. Stay tuned, dear readers, as we bear witness to the unfolding chapters of the Epsilon F1 saga. Happy growing, and may your gardens be forever green! Genetics -Epsilon F1 @rqs_esp @royalqueenseedssp @rqsglobal Food - @aptusholland @aptus_world @aptus_es @aptus_portugal @aptusbrasil @aptusplanttechaus @aptus_thailand @aptusplanttechnz @aptususa_official LES @lumatekeu Controls - @trolmaster.eu @trolmaster.agro @trolmaster.support As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver the universe will give back to you in ways you could not even imagine so #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #rqs #ApoloMission #MoonHarvestAdventure #playwithlego #lego #legotime #legovideo #tothemoonandback More info and complete updates from all my adventures can be found Link in the profile description Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All

END of blooming week 10. I'm very happy with this week. I stabilized the buds, good light / bud penetration. Plants looking more green. Slight leaf burns. Nova OG in the middle, got some big burns at the top. This week i also had every close look at the plants, I still want to give them ~1-3 weeks to finish. Black Jesus OG looking ready, but i need to harvest all at once. And i see many buds still growing. For know i stop feeding. I usually do 2 weeks flush. We will see how it turns out.

Day 8 - Sprouted and looking healthy Day 11 - She's growing a bit to the side but all good Day 12 - I propped her up as well. I'm a bit worried about the roots but they just seem a bit top heavy. I also turned the fan off that's in the tent She got her first good soak today Day 13 - Turning the fan off has made a big difference and she is balancing herself

Hi Guys:) Today is the update of the Sour Diesel 🌱. It looks very healthy and vital 👌. It has grown very nicely this week. Tomorrow there will be a few more pictures, because unfortunately I only came to the videos today. It's a hell of a lot of work that comes with growing and still working in everyday life 😅. What you don't do for your passion 😍 👍 I wish you all a good start into the new week, let it grow and stay healthy 🤗 🙏 🏻 🌱 🍀

Ladies are doing amazing. First week of flower. I’ve went ahead and topped dressed with worm castings Gaia green 444 and 284 and Bone meal also water them with stash blend.

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D36/V32 - 21/05/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL in her new home and one TL of LST job ______________ 📅 D37/V33 - 22/05/24 ⚗️ EC: 1.0 pH: 5.4 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL video and one TL of LST job ______________ 📅 D38/B01 - 23/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 2L 🍗 💧 💼 🧠 As I saw clear signs of blooming, I need to pass to bloom phase so I put B01, in the header. 🚀 Clearly she's starting flowering 🎬 1 TL video and 1 LST video ______________ 📅 D39/B02 - 24/05/24 ⚗️ EC: 1.1 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video and 1 LST video ______________ 📅 D40/B03 - 25/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 15L 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D41/B04 - 26/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D42/B05- 27/05/24 ⚗️ EC: 1.1 pH: 6 🌡️ T: 20°C H: 60% 🌊 15L 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Big Bud - Seaweed 💧 💼 👉👉👉 Changed res and added nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video

Semana 5 y ya en prefloracion, he usado una enmienda orgánica que contiene muchos minerales y también apliqué lactobacillos, los que ayudan a soludibilizar el fósforo en el sustrato.

Towards the end of the harvest, mold developed due to high temperature and humidity. I lost about 30% of my harvest. The buds did not fully mature. Despite all the setbacks, we managed to get a harvest.

12/30/23 - Day 54 - Hello All! I started this week a day early. I wanted to update everyone on something I have been thinking about a lot. Curing. I feel if there was a hole in my growing skills it would be curing. Last grow there was more than I had anticipated. I was not set up for curing 1 lb. I threw in an audible at the last minute. It worked out but I know I can improve with some trial and error and hands-on experience. So after reading a ton, and going off of some of my prior builds for drying, I came up with this design. I have a controller that will turn the air on and will run when the contents inside the box hit whatever RH% I want to set it at. I think the first week I will set it for 78%RH, then every couple of days go down a % until I hit 62%. The thought is that if the bucket gets above the set RH% then the air will kick on and distribute air across the buds until the RH% is back down to where you want it. It will force the humidity out. I won't need to worry about burping. It will happen on its own.... in theory. Ill update tomorrow with some pictures after the water change. 12/31/23 - Day 55 - Everything is looking good. The water change completed this morning while I was in the shower. Its adding nutes now and will do so over the next hour or so. She is starting to get stinky. I had to add the extra carbon filter to the room. I've got some pics up top of that. Happy New Year! Next time I post it will be in 2024! Have a great night and be safe! Dont drink and drive, your life and anyone else involved in an accident is too important! C' YA! 1/4/24 - Day 58 - I have been thinking of trimming her for a while.... I got a comment on the bushy-ness and I got self-conscious and gave her a trim. Lol I have been going bath and forth for a while and that gave me the push to give her a little trim. She looks great and is growing really quickly. Ill update with more pics as it goes along.

So we've reached the end of Week 4 from Seed, day 28 and things are looking much better than they did before..... Apart from one of the plants which I explain in the video I have uploaded. Happy Growing guys, any questions just ask away! 👍🏾🌱💚😎

💚💚💚💚💚💚

el resultado seco de 177 no es real debido a que yo bastante para hacer brownies. pero estoy satisfecho con los resultados y recomendable. un olor y sabor unico

Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 56 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green here I'am again, yesterdy morning my ladies had their last schwazzing that means day 20-21 in flower, all in all everything looks very good, from yesterda on my CO² system is also in operation, tomorrow my ladies only have a bit of ph reg. water from me and giving them some time to revover from the defoliation stress before i start with nutes again.... and now I leave them alone until further notice.... Cheerio & Tataaa🤜🤛👊🏻🇱🇺🌱 ⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 5.90 Tds/ec 1.5 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 00ml by 1L. HyPro : Cal-Mag  0.5 ml by 1L. Light distance: =55cm to plant = 30cm to CTgrow sensor dimmer on 80% = 980umol/m²PPDF +-10 Vpd/kpa  - 1.350 -1.400 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 30% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems

Inizia la fioritura !! Ho cambiato il timer in 12/12 on off ed il giorno dopo già ha preso centimetri . Parte bene questa fase! Per aumentare la penetrazione della luce ho tagliato qualche foglia senza esagerare. Continuiamo così 🙏💪

Welcome growers And also the tirth week of life is finished for this three ladyes, three phenos of SORBET#4 🌿🌿🌿🍧 I have decided to show you the all family, so , in this way we can see if they show some differences 😉 For now I have two pretty similar, with a large leafs and internodes very close to each one.. And another one a little different , more Sativa in aspect, with a large structure that increase the lights penetration, which means more growing for the lower branches 💯 Anyway.. In the begining of the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And therefore, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you in week n°4 📆 Thanks a lot for stopping by 😎👍 FC ✌️ 🇮🇹