me fui dos días de la casa y vean cómo estan mis dos bebés

What an awesome thing to walk in on starting off week three all the girls were praying and just getting so fat, I really need to strip some fan leaves off the mom. They look great, the smaller cuts definitely aren't as good as the 4-6" cuts are, they were MAYBE 3-4" cuts and pretty small, but they are extras anyways so it doesn't matter, just seeing what they do. I'm excited for them to have all this space to stretch out when I pick up another light. Last day of week three and I couldn't be happier, I absolutely have to cut thicker clones , these smaller ones all got a bulbous base? Not sure what that's about but we will see how they develop. They are extras anyways but still nice to figure it all out.

Alterado foto período 10/09. Iniciando a primavera 12/12hs

Day 21 of flower week 3 everything is smelling really great can’t wait for the end here! Update at day 24 and a short video.

The AK loves the Canadian weather cool at night warm during the day just started to show sex she is tall with bog branch spacing

Another demanding week for these ladies but they have reached a milestone. Week 8, and my custom fit SCROG has been installed! ❤️ At Day 50 I separated my 7 gallon girls and my 5 gallon girl. Once done, I began the very easy process of adding my “floating” SCROG. I use ratchet straps, just like the ones that come with lights to secure the four corners of the screen to the top of my tent. This allows me to adjust the screen height as necessary when 1) first installing and 2) once the full stretch of flower has occurred, I can tweak it a bit to balance the canopy as best as possible. It’s not 100%, I still get some over achievers, but I find it useful as another option. I like to do a major defoliation before I set the ladies in. Typically till this time, I have done almost no defoliation, just LST and some HST techniques. I adjusted the ladies placement to allow growth out all sides of the screen, set the screen height and began tucking and bending. The defoliation and bending allows light to penetrate all those side shoots that would have amounted to nothing, and they become top shoots as they grow up and form an even canopy. I don’t like to weave, it can damage the new shoots and cause growth problems, but the goal is to get as even a coverage as you can while allowing for plant growth in all directions. Once complete, I will give the girls about a week to recover and grow those new shoots. I like to have about 80% coverage of the screen, before I change my light cycles to flower 12/12… and if they are healthy and strong. I’ll decide this weekend if it is time ❤️👊🇨🇦😎 Happy Gardening!

The Blackberry auto by Fastbuds has been a thrilling plant to grow. Starting off as a tri-cotyledon seedling, she's been a rush from the start. When she came out mutated I didn't even know if I wanted to keep her; I asked the growdiaries.com community for help. After speaking with a few experts I decided to keep it and see what would happen.. Since then she has developed thick healthy stocks stalks and dark leaves with ripe purple flowers bursting out between them add every node. Using a home mix super soil with Promis Organic as the base, I decided to feed compost extracts laced with Golden Tree & CalMag which helped kick this girl into over drive and push out these dense sticky buds. I'm expecting around 3 ounces from her and it's day 73 since she popped out of the soil. She has a sweet aroma and is completely covered in trichomes. Drying/ Curing process: - she will be hung upside down by the main stock until she is dry (8-12 days) - My humidity will be set to 55 - 60 % and my temps will range from 65-70 degrees F - Will store in Glas Mason jars with 2-way Boveda humidty packs. These are a lifesaver for new growers. They will keep the humidity in the jar at 62%. - after 2 weeks I'll throw down a mad sesh Thanks to everyone who offered me tips and help when I needed it. Thanks Fastbuds for all you do for the community, including growdiaries.com

You can find tbe first week of all girls on my profile, second week is missing coz its just boring and now i start week 3 so its day 15 today from placing seeds to germination. Uploaded a video of their habitat, i still wont name each one indifidually coz i still didnt choose winners / keepers. Unfortunatelly i have a bit low RH for this stage of growth but they obviously dont mind, i spray them twice a day, no burns from spraying with lights on, no electroshocks caused by spraying so all good now. I tried it all enough to be able to say i cant be assed anymore :D Since @growdiaries are not keen on resolving a problem with uploading each pic individually on androids, i will keep one diary for all girls, dont even mind not being able to compete in dom. Stay tuned these girls will rock.

The community is dope. Very helpful and supportive.

Hello my friends . The last week before harvest, I gave her chlorinated water. And sorry for not leaving weekly notes due to lack of time, thank you all for my support. I wish you happy days😘🙏👌🙋‍♂️

Tied down in a second place now, going to tie it in a full circle just for something to try before I top it.

*Week 2 of flower *Sprayed NPK Mighty and leaves are looking better *Gave Tiger Bloom and Dr. Earth Flower Girl. *Watering every day, sometimes twice *Smells like the Zkittles I remember

Week 11 Update – Harvest Time Approaching! 🌱✂️ BioBizz#1 – BT51 She’s done! She hasn’t had any water for the past five days and will be harvested later this week. AN#4 – BT51 She still needs a little more time—probably another 1-2 weeks before she’s fully ready. AN#3 – BT47 Somehow, she’s managing despite the extremely close distance to the light. I haven’t held back on PPFD at all, but she’s handling it like a champ. Super curious to see what kind of yield she’ll bring in! 😅

I know the harvest was too early but I was scared the painkiller could get some bud rot because the next week will be raining non stop. The Special Queen and honey cream are still growing I'll update them tomorrow.

This week things are swelling quick great ! The purple is showing up more but still only trace amounts. The black has no signs of changing colour however I already know my pheno ain’t the one ☝️ . But the purple shows promise!! Slow at cloning and a higher mortality rate then the black amnesia haze. This one almost every single clone I made all root amazingly ! Highly recommend for its yields and ease in the grow room. You can really feed it high . Still unknown why the purp has curling leaves but from others grows I see it’s fairly common . I’m guessing it prefers a slightly more alkaline PH . I’ve been using citric acid to ph correct and every time I sway a little low like 6.4-6.2-5.9 the plants leaves curl slightly more. Most mixes are in the 6.8-6.5 range however.

Tag 42 - Beginn der 7 Woche. Es wird so langsam. Der Blütenwachstum geht weiter. Für mich könnte sie zum jetzigen Stand etwas weiter sein, was aber glaube ich meine Schuld ist, da die Lampe etwas nah an der Pflanze ist. Im oberen Bereich der Pflanze habe ich hellgrüne Verfärbung an den Blättern entdeckt, was auch auf zu viel Licht und Hitze schließen lässt. Ich hab die Lampe nochmal etwas weiter nach oben verstellt und habe der Pflanze an Tag 40 der letzten Woche zusätzlich bisschen Sensi Cal-Mag Xtra gegeben, damit sie für die Lichtintensität gestärkt wird und ich einen Calciummangel ausschließen kann. Ich bin gespannt wie sie sich in den kommenden Wochen entwickelt. Der pH-wert wurde minimal von 6.5 auf 6.6 erhöht. Beschnitten oder entlaubt wurde nichts mehr und werde ich voraussichtlich auch nicht mehr. Gedüngt wurde an Tag 38 der letzten Woche. Nährstofflösung: 1 ml/l - Big Bud Advanced Nutrients 1 ml/l - Bud Candy Advanced Nutrients. 1 ml/l - B-52 Advanced Nutrients. 2 ml/l - pH Perfect Sensi Bloom Part A. 2 ml/l - pH Perfect Sensi Bloom Part B. 1 ml/l - Sensi Cal-Mag Xtra Advanced Nutrients.

Germination date 🌱 02/12/2021 Day 52 26/01/2022 Strain 🍁 Barney's Farms Biscotti Mintz (Biscotti x Mintz) THC% • 30% 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Dr Forest (dry amendments) Grow Bloom Bloom2 🌱 Growing Media • Soil Notes 📝 Not much love for this girl she doesn't look healthy at all. No doubt still in shock. Still going to run it as I'm keen to see what bud is like 💚🌱👍🏻 Discount codes in bio for Mars hydro

This week im going to let it grow and fixing the LST.

Week 2 There has been an explosion of growth over the last week. I am amazed by how explosive it was. There are some nice bud sites forming as well. I did get a little bit of yellowing at the tops of a few fan leaves so I don’t think I will go quite as high feeding wise. I’ll go a 100ppm or so lower than what the feeding schedule recommends. I had a bit of an accident though. I was doing a little LST and I snapped a top clean of 🤦‍♂️ So now I am down to 15 tops, doh! Cooler internals for the week were: 6.0 pH 420 ppm on the 500 scale 0.9 EC 66F water temp. I can’t wait to see what week three brings! Onward 😎🍻🌱