All going ok ... there looking frosty as hell.....nearly on the 7th week of flower just need that fatting up stage now

Seed to harvest day 67 Sticky buds Fruity smell Good strees performance Total Used power 400w

Big Fat Wedding Cake is on the end half of bulking. She is looking really good with a sweet flowery smell. She did get nute burned prior me changing the solution a few days ago. Everything is looking great now. Thank you DutchFem Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)

June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa

Been busy you guys sorry about the updates.but yeah started showing preflower signs...

Hey all! 👋 Remember last week when I said Falco was getting some chlorosis? Well, the first photos show how bad it is (or was) but the plant is "old", she was quite special as a young plant and her main leaves are doing well so I suppose what is happening is just something normal or maybe some other weird factor... might be affecting her, but more probably I'm just way too worried. In my confusion I added 2ml of Green Grow (which is the growing fertilizer I previously used) thinking that she needed the extra nitrogen but in the end it seems it was unnecessary (as it's a normal process of the plant), I just removed the old leaves and left her to be. 😝 Besides what I previously said I saw a lot of bud progress this week (and I tried to picture all that! 😋). There are plenty photos of the same flower (most of the times!) showing how trichomes were constantly appearing during this week. Next week I'll be adding some extra Potassium and Phosphorus and I hope those products will help my babies to get bigger buds! I also made a video at the end of the week to show how my plants look at a normal speed plus two time-lapses. There are also some photos I took with my DSLR and an inverse ring just to see how the plant would look... and I think they look amazing! 😍 Anyway, I hope you all like the photos and thanks for reading! 👋

Loading... Jah Bless

Our Jet Fuels have the aroma that we like the most potentially at Casa BreadandBuds the Diesel aromas and derivatives are the favorites. That said we have two plants, as with all photoperiods, one planted a little earlier to be worked with the topping that will start next week, the other planted 10-15 days later to avoid size problems will be grown straight with the main cola, because giving up the main cola is a tear to the heart. We gave Power Roots 1 Ml/l , Pure Zym 1 ml/l , Sugar Royal 1 ml/l , Alga Grow 3 ml/l - Plagron nutrients are available at Zamnesia in convenient pack formats for all growing styles. I used this one with a simple search you can find the other products. Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/it/11258-zamnesia-seeds-jet-fuel.html Zamnesia Description //J Jet Fuel (also known as G6, Jet Fuel OG, and G6 Kush) is a modern hybrid rich in THC and terpenes with a diesel aroma. Originally created in Colorado by crossing Diesel with Aspen OG, this 60% sativa-dominant hybrid is a must-have for any smoker who enjoys an uplifting and energizing high. Now, thanks to the hard work of our breeders, the original Jet Fuel is even easier to grow at home. Order your seeds, plant them in soil, and enjoy their rapid growth. After just 9–10 weeks of flowering, you can expect a generous harvest of premium sativa buds! All the best that mother nature can offer is on ----www.zamnesia.com

The grow on my Big Blue Cheese was beautifully satisfying. Not one deficiency or problem to report with her, she loved to eat as much as you gave her. Plus the size of her stalk and branches were on point, a perfect plant from the beginning. I performed LST, super cropping, and topping to create this 12 top beauty. Big Blue Cheese is a 8-10 week flower strain that I harvested on day 64, along with a 6 week veg to create this perfection. Recommended over and over for all growers with that sweet tooth craving 💯🔥💪000

5/07/24 day 15 I was worried with how small she is, I started her a little early for outdoor so she hasn’t been getting proper lighting but she’s not too far behind other plants at this age. Hopefully she’s set her roots deep and is ready to grow upwards 5/11 she’s loves the sun so much. I was worried about her but she’s gonna be fine 🌱 5/12/24 I gave her a tsp of Terp Tea Grow 711. This last week she had grown very well, she has 3 nodes total and is working on more

Easy week the autopots are doing the hard work. I have been foliar feeding with my KNF collection LAB, FAA, WCAP. I also went foraging to make some IMO , have added pictures if anyone is interested.

Ladies and gentlemen, today's day 31 and and this beautiful young lady is already showing sex so she's officially in pre flower.. Zamnesia Seeds i say it time and time again, but they are batting a thousand with me so far.. big shout out to them and to Plagron for throwing together this contest, i'm looking forward to trying their nutrients coming up in the next few weeks.. I'm expecting her to begin her. Stretch this week so next we we should see some real growth .. good luck to everybody in the contest and to everybody else.I hope your ladies are doing fantastic! God bless and happy growing ✌️

First plant already shows signs after 2 days.

Miam miam on va se régaler !!🔥😵S dans

Week 4 was defined by the discovery and correction of a significant salt and nutrient buildup in the medium. On Day 21 (Jan 20), runoff opened at 2100 PPM — well above safe range — triggering an emergency flush. Feed input came in at 418 PPM at pH 6.99, and multiple plain water rinses at pH 5.8 were run through the medium until runoff dropped to 1180 PPM at pH 5.87, EC 2370 µS/cm, salt 0.11%. Medium was flushed down approximately 920 PPM in a single session. No further watering for 24 hours following the flush to allow the root zone to stabilize. Environment ran well overall — temperatures holding 76–78°F lights on and ~70°F lights off, humidity steady at 68–70% with brief transient dips when the humidifier tank ran empty. VPD tracking ~0.9–1.0 kPa throughout the week. PPFD running 380–420 µmol/m²/s. CO2 ambient with no supplementation. Day 25 (Jan 24) feed came in at 642 PPM at pH 5.91 — notably the water temperature was very cold at 4.7–6.0°C, well below the ideal 20–22°C range. Cold water can slow nutrient uptake and stress roots. Worth monitoring in future sessions to ensure water is allowed to reach room temperature before feeding. No runoff recorded this session. By end of week, runoff had settled to 1440 PPM at pH 5.8–5.9 — trending in the right direction. Feeding plan reset going into Week 5: ½ gallon at 600–700 PPM, ¼–⅓ strength veg nutrients only, no boosters, pH 5.9 target with 10–15% runoff. Goal was a gentle nutrient reintroduction to signal roots to resume uptake without risking a salt rebound. The Sundae Thumper continued developing steadily through the stress of the flush week.​​​​​​​​​​​​​​​​

it's always a pleasure to do business with Barney's Farm!!! They have never let me down even once!! Even in the worst situations and conditions they have always been able to bring out the best for me!! I really enjoyed forcing these plants to see their reactions, but I wouldn't do it again as a technique because it only serves to keep the canopy low but not to increase the yields...or...at least in my case I didn't find it of fundamental importance....maybe a simple cut of the apical top and that was it! but that's fine 😉

D1. Three of them make it to 2cm in three days, the fourth one already rooted but taking it easy, I watered them a bit and covered the lazy one to blackout and see if she can do it 💪 Lighting at 8.5 DLI (100 PPFD@24h) with the lamp dimmed at 57cm from the soil. D2. The lazy seed still struggling to sprout but seems she's so close to make it since she's already out the soil. The three strong ones already grew to 4 cm in 24 hours, +2 cm, a growing rate of 0,83mm per hour. Following the seedling schedule lighting now will be at 12 DLI the whole first week. D3. The seedlings are growing strong except the little lazy one, I had to help her sprouting this morning using tweezers since both leaves were trapped inside the seed not being able to open by itself, unlike the other ones that did it by themselves three days ago. Will she gonna make it? Let's give her time 💪 D5. The red worms look very active but the leaf tips are curling up so I moved from 24h lighting to 20h and let em rest a bit keeping 12 DLI and 80% humidity while lowering temp at night from 25°C to 23°C. The lazy seedling still so small and definitely don't match their sisters growth rate, let's see if there is any progress next days. Also I already installed the Blumat, the parcel arrived missing the final drippers and the 3mm tube but they already send it. I adjusted the system following Michael Box top tip on this Growcast podcast, https://youtu.be/g5YFcxW3kXI?si=tkm6F1fF65CaNruq It consist on adjust the holding drip at atmospheric pressure without the ceramic cone/tube part, then from there screwed the regulator one more carrot (on gravity systems), mark it and put on the locking cap, this way it should provide 80mbar of water tension so there is no need to keep readjusting and you can leave it that way between runs. I use the Tropf max version expecting to keep the bottom of the 25L pots not so moist since 8 days later of the only watering done the moisture is still at 56mbar, looks like it will take some time to start dripping on. Meanwhile I'll keep an eye on the top moisture and if needed just hand water few mililiters a couple inches from the stems. D7. Today I received the missing parts from Blumat and this is the last day of the first week! I think they are looking good despite the little curled up tips from fifth day at 24h but lighting schedule is already changed down to 20h since fifth day midnight. Now they are 6 cm tall and look like they want to start vegging, tomorrow I'll start to daily increase DLI progressively until achieve 16 DLI by the end of the week. The lazy one seems to be doing it, very lazy but growing a little bit every day 💪

-I’m going to check tomorrow, March 2, to see if the seeds have popped. I’ll take pictures then. -It’s March 6th and the seedlings are looking happy. I’m hand watering them with filtered water. I’ll make a tea and start adding some benies the next time I water them, hopefully. I want to add my go pro and stream live.