At the end of past week a branch was broken from the longest plant. Also she got some burnt leaves because she was to close to the corrugated roofing. Every time I went away I was giving them shelter. Weather was unpredictable. Only got this video this week. The weather was getting better😀, but still cold nights.

I think there’s been some sort of salt build up / nutrient lock. The lower leaves have been turning a lighter green and some even yellow on SL plants. Most stems are red. Seems like it’s a pH problem. I flushed them with 4-5 litres of water to reduce the nutrient concentration in the roots. Going to introduce molasses in next feeding! Organic Unsulphered And also stop the Micro (nitrogen)

I think there’s been some sort of salt build up / nutrient lock. The lower leaves have been turning a lighter green and some even yellow on SL plants. Most stems are red. Seems like it’s a pH problem. I flushed them with 4-5 litres of water to reduce the nutrient concentration in the roots. Going to introduce molasses in next feeding! Organic Unsulphered And also stop the Micro (nitrogen)

-Sensi Seeds Research: The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #9: The plants are vigorous, they started to stretch about 2 days before the week finished. The ScrOG is filling up gently and the canopy is at the same level. There’s not much to do in the first 2 weeks of 12/12 photo period. For Beginners and new growers, this is where you stick on your Veg nutrients for another 2 weeks. They need Nitrogen to support the stretch and if you switch to bloom nootz to early they will start yellowing around the end of week 3 of Flowering, by moving their Nitrogen to save the top. Adding the right amount of Nitrogen during this phase is crucial. Not enough and it will run out for sure at the end of stretch, too much and you will start to see some claws on the leaves , tips of the leaves pointing down, and way too much nootz burns will appear. Both cases will make you loose around 20% to 25% on the yield ! To conclude the Veg, I have change one important factor that was the soil, but Cellmax BIO Soil is doing a really good job, plus the Sensi Seeds genetics which are extremely easy to grow, makes me feel very happy 😊 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control 🐞)

ok...serious growth.. My room is not high :) enough to harbour the ladies.. mmmm. let me think for a minute I'll dominate the living sh@t out of them... ; SUPERCROPPING

9/4 Day 135 of the grow, wow 20 weeks Plants doing well all depends on weather now I guess 9/4 Keeping tabs from here out in terms of day of flower, total grow length has no bearing. Poly Day 55 of Flower 9-14 days remain Zona Day 45 of Flower 19-24 days remain 9/7 Re-adding Big Bloom (Fox Farms) to nuet mix, plants seem to be missing it and I agree. Once a week at 3 tps/gal

This week I had to Lollipop again (I know is very late and I hope I didn’t stressed the plant to much). My canopy is so tick and so many overlapping leaves and buds in the center of the plant that don’t receive enough light or any at all , n combination with the RH swings that I got going on (45 and 63 RH), I’m very afraid of mold. I should have did a better job at Lollipoping from day 21. I’m inexperienced grower and I didn’t knew better. I decided is better to risk to shock the plant a little bit risking a reduction in yield then get mold or pests and lose it all. My 30 pin dehumidifier works great with the AC but sometimes when the AC( compressor) stops my RH jump at 62% -63%, witch I don’t like . I’m trying to keep the humidity around 50% but in such a small room between the AC and Dehumidifier I got big swings in temp ( 75-82) and RH ( 45%-63%) witch is not ideal but is nothing that I can do. I played with the AC and Dehumidifier setting a lot trying to keep humidity around 50% and temp around 80 degrees and that’s the best I can. My AC is set at 82 degrees and my Dehumidifier is set at 45% RH. Also during the lights off (day time) is very hard to keep the temperature In control when outside is 110-115 degrees with my portable AC (1400BTU) in the 4x 6 closet. Is crazy but I do my best to keep temp under control. This is another rocky mistake I made is trying growing weed DWC in the middle of summer where temps are 105-115 degrees constant in a closet without centralized AC port and at second level in the building. LOL Also I think I underfed her (630 PPM TDS, PH 5.8-5.9) ) and I got a Ca deficiency witch I think is the reason my flowers developed slower then I anticipated. Hopefully I’m wrong and everything will be good. P.S. I got a little bit of calcium deficiency caused by salt buildup (to much PK boost) despite my earlier belief that is underfed. I increased the PPM from week 4 (630-640TDS) to 680 TDS) on week 5 while I kept the PK booster at 3+ml l per gallon. Slightly my PPM’s was rising in my reservoir for few days until I decided that my plant can’t take that much nutrients (PK). 2-3 days after I increased the TDS I’ve noticed more spots on the lower leaves with tip burns on top ( first signs of PK toxicity). One day later found spots and yellowing of the leaves on top of the plant that indicates Ca deficiency caused by salt buildup ( PK toxicity) and reversed osmosis (hope I’m not wrong). Going into week 6 I lowered the PK boost at 1.5ml / gallon and total TDS to 640 PPM. Seems like leaves damage to stop and my PPM to stay stabile at 630-640. Trying to keep PH at 5.8 max 5.9. I will post pictures of my Ca deficiency/ PK toxicity. If you guys have any suggestions please leave me a comment.

Day 75, close to the end !! Still flushing and getting ready for harvest ! In approx 6 days, I'll harvest my first one, the rest a bit later, not ready yet. So I got a second hand furniture that I turned into a drying box to start drying while the rest is still growing. I'm so excited for the harvest !! It has to be soon cause I'm running out of weed ! I won't wait the curing to be done to start smoking it lol. A huge thanks to all the growers who helped or commented me, I learnt so much on this website, please feel free to ask for help, I'm not an expert but I'll always try to help the community :) Good luck to all !

Day 53 of flower. I have been flushing them for 1.5 weeks with ph adjusted water. Also keeping an eye on trichoms and I have got lots of amber now. I will be harvesting at the end of the week (Friday).

Turned out amazing still hanging for a week. You definetely need a carbon filter for these. No pests or disease, eady to grow . She will eat everything you give her 💪. 2 distinct Phenotypes. All have dense buds dripped in resin. Responds very well to lst and topping once. The only bad thong is there is a phenotype that is very small and not on par as the other two huge difference. Loving it. Learned alot.

Buds starting to put weight on and plant has got quite frosty really surprised with how stocky she is!

-Flowering is going well. Gunna try and test the ph of the runoff this week to see if I have an issue. -BC1 has some yellowing leaves near the top of the plant. -WW1 (the bushy plant) has had 2 major haircuts this week. I’m having a really weird issue with some upper leaves turning red! They’re turning red, not dying or falling off just turning red, it’s weird and only happening to this plant. -WW2 and BC2 are doing amazing! Pretty much all green except for the occasional old yellowing leaf -Time to pack on some weight -Midget has started to flower, doubt it will be ready before the cold, we’ll see what happens

-Flowering is going well. Gunna try and test the ph of the runoff this week to see if I have an issue. -BC1 has some yellowing leaves near the top of the plant. -WW1 (the bushy plant) has had 2 major haircuts this week. I’m having a really weird issue with some upper leaves turning red! They’re turning red, not dying or falling off just turning red, it’s weird and only happening to this plant. -WW2 and BC2 are doing amazing! Pretty much all green except for the occasional old yellowing leaf -Time to pack on some weight -Midget has started to flower, doubt it will be ready before the cold, we’ll see what happens

Hello from New Zealand 10 days cloning, about to transplant into 8x ebb and flow bucket system. System designed and built myself. Proven to deliver 8-12 week results. System can be purchased from me (website under construction) via parts or a kit in a range of options. We will ship worldwide. It is fully automated and controlled from a single control box including lighting,fan control. Can be customised to run off 110v, 240v, 12v or 24v

Just got my new lamp, happy to show the love my plants been getting :)

I'm satisfied from tbe overall yield, 65 grams dry is good, but I would have expected more. The smell and taste are awesome and it's very strong, it gives you good appetite and the high last long. Buds are a little bit airy but this must be that the light source is not enough. That's all lads, have been a pleasure updating this diary, and now I'll focus on the other one running that is coming up really nice. It's not a very cultivated phenotype on the site, so come and check it out! Stay tuned and stay high nice people!!

This lady is certainly a a dark horse, the smell is amazing.. an old school smell that reminds me of my times in Amsterdam many years back. She is showing no signs of nutrition issues, and the buds are swelling at rapid rate. They are dense and pungent with a fruity hint.

1/9 Both finally transplanted to 7gal Fabric pots. Plant 2 is doing really well, no stopping her now!! Plant 1 is doing slightly better than she was, going to give a slight defoliation over the coming week and hope she picks up. 2/9 plant 1 is slowly getting her shit together I think, I'm going to leave her be as much as I can this week. Plant 2 is doing me proud, recovered well after transplant/topping I'm going to continue training her as I see fit. 3/9 #2 has been fed today, nothing for #1. #1 is slowly getting there now, #2 is still going strong as ever💪 I think I may take a few clones off her soon 4/9 been noticing a few wet patches the past couple of days, had a biting a trim and will continue to do so as needed. Plant 1 is starting to do her thing now too, plant 2 going string as usual. Both have had a little trim ....can't remember if i watered or fed today 😂 5/9 no comment today, tired out 6/9 plant 1 doing well now, shes starting to look quite hungry sevill give her a feed tomorrow of the easy boost 123 combo. Plant 2 doing her thing as usual 💚

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8