The Grow Awards 2026 🏆
Likes
Comments
Share
@MrGoonai
Follow
####Please do read the disclaimer in the first entry! 01/28/25 Short facts: - VPD @ 1.0 but normaly it doesn't get better than 0.9 - Light @80% so most leaves are exposed to 500 - 960 ppfd - Success with the colloidal silver --------------------------------------------------------------------------------- Finally, the attempts to spray her with colloidal silver were successful. Many pollen sacs are developing, and I hope they will be ready within a week. Buying a new spray was the right decision because, with the new one, it took less than two weeks for the pollen sacs to appear. However, the leaves are looking worse now—some are almost 70% dead. I still hope she will make it so the seeds can fully develop. I planted the Lemon Cherry Cookies much earlier than the other two plants to avoid pollinating Slurricane and 1:Walt. However, due to the delay, both are already in flower, so they will end up with some seeds. Maybe one of the crosses will turn out to be something special! 😂
Likes
92
Share
@GMSgrows
Follow
The Cheese is the Cheese! Mm the smell. Shut my extraction fan off for some vids the other night and when we awoke in the morning., oh my lord. I can't even describe the odor in my home, but the wife sure wasn't happy. I forgot to turn the fan back on. I have done this before but never has it smelled the way it did the other morning. Oh well, all good now. The Cheese trees are happy, as am I. Couple more week and hope they ripen up quickly. These are some beauty plants. Looking forward to trying the cheese, then some crackers lol.
Likes
1
Share
@einamio
Follow
I'm turning my tent into a citrus garden 🍊🍧🧡 I will be growing autoflowers: Orange Sherbet by Fastbuds and Cream Mandarin XL by SweetSeeds just like I did with Mimosas. This seed is full of vigor. Germinated without any problems in substrate in 4 days on schedule, without any hesitation. Didn't need any help with the shell and didn't care about low humidity. That's what I want to see in my seeds. I was having all kinds of issues with seeds lately but this one wants to live love laugh. I guess we'll see, let's go growmies 🙌 She spent the first two days in a cup, day 3 I carefully transplanted her into her final pot before roots got to the sides of the cup. I hope she won't notice. Made my first growlapse 😸 Day 7 Going strong! Great beginning of a journey! 😎
Likes
6
Share
Very easy strain to grow and even better one to smoke.
Likes
5
Share
Third week of flowering and everything's fine. Humidity at 65% Lights at 80% at 35 cm. Increased the amount of nutrients since she's still growing. 2 litres every 2-3 days.
Likes
26
Share
Processing
Likes
1
Share
@BudTowers
Follow
Growing growing growing. So, I have an extremely stressful job, and even though working with plants (of all types, not just weed) is how I unwind, it is coming to a head. Therefore, while I am still trying to get my updates up on Saturday or Sunday, sometimes, I spend the weekend just short of catatonic. However, enough about that shit. These plants are BUSHY. B-U-S-H-Y. Thankfully, the plants have realized where each other are and aren't really growing into each other. We're getting closer to one square yard by the moment it seems like. Other than that, not too much to report. Whenever I open the tent, I am hit by a blast of smell. I can't wait to see what these smell like when they're actually flowering. I have already decided what I will be adding in for the flower cycle, so we'll see. Update: after a bunch of deliberation, I spent a good chunk of time between the past 2 days defoliating, LST, and supercropping these plants to stop growing into each other. I'm happy with the results, and pictures will be up soon.
Likes
11
Share
@Eddjack
Follow
Si presenta bene veramente bene ...un po' lenta nel gonfiarsi ma promette bene. È piena di tricomi e presenta popcorn rosa e arancioni. Ora devo solo aspettare il mio nuovo giocattolo mars hydro ts 1000 sicuramente avrà una marcia in più! Alla prossima settimana Dajeforte growers!
Processing
Likes
3
Share
Likes
9
Share
The Bruce Banner girls went wild this week! 💪 At the start of the week, all three were sitting on IFCO crates to even out the canopy, but #2 stretched so much that she had to be moved down to the floor. She’s officially the tallest now and really taking off.🚀 #1 started stretching more as well and keeps growing strong, while #3 is still a bit smaller but catching up nicely.🌿 All three look healthy and vibrant — deep green color, no signs of stress or deficiencies.💚 They got a light defoliation this week, just removing a few big fan leaves that were shading lower budsites.🍃 A proper defoliation will come once the stretch phase is over. Environment: Temp: 25–26 °C RH: 55–60 % PPFD: around 900–1000 µmol/m²/s under the Spider Farmer SE5000 Controlled by the AC Infinity AI system 🌡️ They’re drinking a lot #1 still the thirstiest one, taking about 4 L every 2 days, while #2 and #3 get the same amount roughly every 3 days.💧 Overall, they’re stretching beautifully, stacking up nicely, and looking more impressive each day. Can’t wait to see them finish the stretch and start focusing on those buds.✨🔥
Likes
40
Share
Day 27 from seed: Wow these ladies like life it seems. Some very good growth this week and the switch to Mega Crop has started well so far. The Paler girl is starting to darken a little more now so let's see how we go. As mentioned in the video , I have been able to top them this week so the training can slowly begin . The only thing I need to sort now it the watering regime for the Los. They are doing good with the MC being used too. I am dialing them all in this week to see how green and healthy we can get them. I am looking forward to their smoke as these have been a strain I grew as a photo period a while back. Love these fast buds girls.
Likes
13
Share
There should be some really nice growth this week. This week will set the foundation before the stretch. I plan to let this one go for about a month before I start any lst.
Likes
5
Share
- Ich hab die erste Woche des Biobizz Allmix Düngeschemas gestartet und gebe wie immer erstmal vorsichtige 100%, da meine Erde an sich durch den Kompost recht potent sein sollte. - Außerdem hab ich mit meinem Calmag-Rechner mein Leitungswasser angepasst. Die Werte könnt ihr auf den Bildern sehen. - Den PH-Wert passe ich ebenfalls auf 6,5 an.# - Die Lampe bringt zur Zeit etwa einen PPFD-Wert von 350 - 360 µmol/s/m² bei 18 Stunden Beleuchtungszeit (DLI von 22 - 23 mol/d/m²). Sie wird aber nur eingesetzt bis es warm genug draußen bleibt. Tagsüber stehen sie jetzt schon draußen, sofern es nicht regnet oder stürmt. Die Purple Haze macht sich hervorragend und sie ist ganz vorne mit dabei. Das freut mich wirklich, da ich die immer mal sehen wollte. Ist vermutlich nachvollziehbar. 💪😁👍
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
17
Share
@BLAZED
Follow
Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily move the pots in and out the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Before i watered them i weigh the pots. Dry weight: Chemdog #1: 4.2 kg Chemdog #2: 5.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Chemdog #1: 3.9 kg Chemdog #2: 4.7 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest The buds are looking good! Sadly i dont have a timelapse for this week.
Likes
2
Share
@Hontsa
Follow
This week has been mostly sunny with minimal rainfall...☀️🍀💪🌱
Likes
59
Share
Prima settimana di fioritura,tutto procede più che bene,,anche questi altri giorni si sta riprendendo ogni giorno di più. ..