The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
Started doing some light defoliation a bit each day on the very low level offshoots and any big leafs blocking main bud sights. Looking back I should have done a bit more earlier on as these are very heavy and leafy plants. At the start of the week my light was at 55%, on 13 Nov I put it to 100% to see how they react. I will monitor to see if they are ready for it but they really took off this last week. My one plant in the back left always appears droopy compared to the others because the leafs on it are so big it weighs down the whole plant. The plant in the back right was always janky and I considered not even growing it. The seed came through a few days later than the rest and I almost wrote it off. Figured I would use it as an experiment and try and learn from it instead.
Likes
37
Share
Last lap ! This is the biggest plant a grew, def
Likes
14
Share
Welcome to Week 3 of the Sweet Seeds Gorilla Girl XL Auto’s grow. It’s been extremely cold here in Canada this last few weeks and these plants are doing their best to survive- not thrive. Although they are healthy and happy, they are just not thriving like my previous Sweet Seeds grow from the fall of 2021. The temperatures are only a few degrees cooler than spring, summer and fall but the humidity is extremely low at this particular time of year- 20-25% at best. Without adding additional humidity via a humidifier, my plants are at the mercy of the dry Canadian winters. Week 3 did not bring the expected growth spurt experienced by the plants in my previous Sweet Seeds grow (the Cream Mandarine XL autos). I have included a side by side comparison photo above to show the massive difference in size between the two SS grows. It’s because of the slow growth that I have decided not to top these plants 👎🏼 I increased the water early in Week 3 to 2.1 litres per plant every 4th day (0.52 of a litre per plant per day). Hopefully these ladies pick up a little over week 4. Mom’s Tip for Week #3- To Top or Not to Top?… Topping is an simple technique used by growers to split the main stalk/stem into two separate stalks/stems. This allows for height control when growing XL strains, encourages lower branch growth creating a more equal canopy height and of course- creates two beautiful, big colas instead of one! But topping Autoflowers has long been the source of great debate so I’m here to clarify Mom’s Do’s & Don’ts when topping autos. Do top your plants if they are healthy, thriving and on track (growth wise) with other growers and any info the breeder’s might provide. Don’t top your plants if they appear unhealthy, simply surviving and behind/slow (growth wise) compared to other growers growing the same strain. Do top your Autoflowers between 3-5 weeks from seed or when your plants have grown as many sets of branches as you desire (usually 4-6 sets of branches or nodes). Don’t top your auto’s beyond the 5th-6th week as they are most likely going into full flower. Do top, prior to or very early on in the pre-flower stretch and don’t top too late in pre-flower or once budding has begun- it’s too late and you’ve missed your opportunity for this grow. Do top your plants if you know what you’re doing and you’ve got the right tools. Believe it or not, I use a sterilized set of nail clippers (dedicated to this job alone) as they deliver a clean, controlled, perfect cut every time. Don’t top your plants if you haven’t done your homework or you haven’t got the right tools. Many people use their fingers but I find they are too large and awkward for such a precise job. More than once I have missed (FIM’d) or taken one of the two baby branches that are supposed to be left behind or simply injured those tiny developing branch sites by accident. Do top your autoflowers if you are growing a large/XL strain in a small/short space. This allows the grower to influence/control the overall height of the plants and creates a more equal/level canopy of foliage and eventually bud. Don’t top your auto’s if you are growing a short, fast flowering strain as this can sometimes stall/stunt them a tiny bit. Some Autoflowers run such a tight seed to harvest schedule that they legitimately cannot afford any interruptions in their growing cycle so check the breeder’s info before you chop. Do have fun with growing your Cannabis and don’t be afraid to try something new. Don’t top your Auto’s expecting to triple your yield though. I have learned that it will change the shape and height of your plants and you’ll end up with less low level, larfy bud but your yields will be almost identical whether you top or not. ✂️✂️✂️
Processing
Likes
7
Share
@Dunk_Junk
Follow
Flowering stretch almost done!! She is a good sized plant for a tiny 1 litre airpot.
Likes
11
Share
W9- Light 20/4 I will apply nutrient for last time. After this week I’ll start flushing. 1-2 weeks to harvest. They smells good same as i bought from my dealer😂 🍀🍀🍀
Likes
16
Share
Potted up yesterday and a little lst, this will probably be the last time I run the strawberry lemonade cuttings and hoping to find a decent pheno from the orange punch to keep for at least another run or two.
Likes
1
Share
Experienced explosive growth this week. I continue to LST for a low canopy.
Likes
20
Share
@Raul2021
Follow
Día 1: Germinación en servilleta, coloque la semilla en un tuper redondo con una servilleta doblada a mitad en el fondo, la moje con agua, hasta que estuviera bastante húmeda y coloque las dos semillas, luego puse otra servilleta sin doblar encima y la moje un poco hasta que quedara húmeda, el agua no debe quedar encharcada, cerré el tuper y lo coloque en un lugar con oscuridad total, en el mueble de la tele, use un vaso de vino para el agua. (23:00 hora de germinación). Día 5: Las 2 han estirado, una mas que otra, el talló mide como unos 6cm de alto, esperando a que le salgan las primeras hojitas, todavía siguen con el cascaron pegado. Día 6: Las plantas han estirado el tallo pero le faltan que le salgan las hojas, una tuve que quitarle la semilla manualmente y la otra la tiene pegada, creo que ha sido debido a la falta de luz, la próxima vez colocar las plantas en el patio y no en la ducha a oscuras, también, plantar un poco mas la semilla para que se le caiga la cascara más fácilmente. Pasaron las horas y la cosa seguía igual, pero si es verdad que los cotiledones intentaron abrir, pero tenían una cosita marroncita alrededor, que había dejado tras quitarle la semilla que les impedían abrirse, con un bastoncillo de oídos mojado en agua y con mucha paciencia, poco a poco le he sacado la membrana, esta enseguida se han abierto y han salidos sus dos hojitas, esperamos que mañana hayan crecido y todo haya salido bien. Esto ha pasado por no poner las plantas con luz y por plantar muy pronto las semillas, la cascara no humedeció lo suficiente. Día 9: Una de las plantas ha crecido y ha recibido todo un día de sol, la otra tiene el tallo muy débil y se tambalea, le eche un poco de agua con el vaporizador y se relleno un poco con tierra a ver que pasa, y la he colocado en las planchas, la otra ya se va a quedar fijo fuera bastante firme aunque tiene el tallo largo también, pero esta creciendo bien.
Likes
7
Share
Onto the next week of flower. Going on a short trip away for 2 days from 17-19th, so the reservoirs will be full before we leave. Got back to more growth and had to raise the light up. Ladies looking great and getting big. We are a few days before lollipop so the tent is a bit humid but not bad. It will be easier to keep VPD at 1.2 after day 50 or so when some of that unneeded growth is out of there. Lollipop done on 21st and 22nd. Next on 23rd to finish up. Things are getting frosty with the CropSalt Bloom nutrients. Ladies didn't mind the haircut one bit Buds are starting to swell!
Likes
27
Share
I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!
Likes
7
Share
@S3phwea
Follow
Plant therapy had been amazing. Winter is my hardest time of the year. I actually usually use a supplementary light during the winter to help with my mood and I wonder if being around the LEDs has any similar positive effects. I know the nuturing and process of growing has been a great practice of patience and almost meditative for me. Plants are friends. I believe the plants are well. I have a microscope to keep my eyes on trichomes maturity. I hope they all end around the same time. I would like to chop/dry them together in the tent. Thanks for everyone who has come on this journey with me so far.
Processing
Likes
1
Share
Likes
7
Share
@Dsif90
Follow
It was a great week for her she has started budding in full force. I have been battling with humidity issues because of trying to make more space inside the tent and moving the humidifier around but I think I got it straightened out now
Processing
Likes
8
Share
@Max1973
Follow
Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎
Likes
33
Share
😶‍🌫️😶‍🌫️👏🏻👏🏻👏🏻
Likes
8
Share
@Grow_yyz
Follow
Harvest time. I’m happy with the final results of my grow. The weed smell amazing citrus notes. Fiquei muito feliz com o resultado final do grow. O fumo tem um cheiro cítrico delicioso.
Likes
5
Share
@DoxPuppy
Follow
I added my old light to the setup for more Watts, a total of ~230 Watt is soaking that lady in photon
Processing
Likes
3
Share
@Kushizlez
Follow
Day 28-35 (Day 29) I had some leftover pH 5.5 water from my other grow, it’s a little acidic but my medium is pretty base so it should balance itself out soon. (Day 30) Plants didn’t respond well overnight. They’re drooping and not looking very happy anymore. I’m guessing they will still recover in the next few days though. I’ve got to stay more consistent with the water. I’m going to make a water formula and consistently use it every time. I don’t like these pH fluctuations. (Day 33) I’m going to sprout 8 more plants today to help fill out the tent before I flip. I will be using pretty lame genetics but I will probably still find something I like. Got x2 SM Jack Herer, x2 SM Blueberry, x2 SM The White OG, x2 SM Badazz OG cheese. Last time I ran badazz og cheese it grew fine and yielded well but it got some pretty bad powdery mildew and the quality was lacking. I will make sure to give as many preventative sprays as possible before flip. This whole tent is highly susceptible to powdery mildew so I might be in for some issues later down the road. I will make sure to vacuum frequently and spray down the tent and my equipment as much as possible. The slurricane has recovered from its topping and is producing two new main stems. Its going through water quite fast so I’m going to transplant into a 1.7g pot. (Day 35) Dropped the ball hard today and accidentally knocked over the tray with all my new seedlings. Good news is they just got watered and were firm enough to keep all 8 seeds rooted and in place. Bad news is I mixed up almost every single container..... The only plant I am certain of the genetics is one of the cheeses. The other 7 are all mixed up! I’m sure I can tell all 4 apart by late mid-late flower, but this just sucks. I guess I will number them like prisoners 😭😭 I overwatered the slurricane a bit and it is looking like it has a lockout of some sort or it could be from the foliar spray. I’m going to back off and let it do it’s thing for the next week. I hope all the stress I’m putting it through will slow it down to the level of the locos and garlics. Garlics are looking happy so I’m going to transplant them into 1.7s today. Might as well get this slurricane, guava and locos transplanted too. Guava appears to be growing quite healthy but has had interveinal chlorosis since it has sprouted. If it doesn’t green up in the next week I will pull it. Man, I can’t help but feel this grow has been cursed since the beginning. Although a rough past don’t always make for rough future. I found a way to consistently pH my water to 6.2 every time. I’m starting with 60ml of chlorine free bottle, adding in 2000ml of RO water and just that alone gets me to 6.2. I can also add in 3ml of remo nutrients calmag, 2ml of EM1 microbes, 2ml of 0-0-15 kelp extract and the pH will stay stable at 6.2.