The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had partly cloudy skies, low humidity, and temps in the lower 80's. I watered about .25 gallons from the water hose. Day 2 we had lite showers in the morning, partly cloudy skies and temperatures in the low 80's the remainder of the day. Day 3 we had showers in the early morning until afternoon. Then it was mostly sunny with high temperature around 79. Day 4 we had thunderstorms and rain in the morning, then rain and drizzle intermittently throughout the day. High temperature for the day was 71°. Day 7

🌱 Week 2 – Vegetative Growth 09/27: Started the day noticing chlorosis on some leaves. The pattern matches an iron deficiency: interveinal chlorosis mainly on the newer leaves. After checking, this seems to be caused by a nutrient lockout, consistent with the high substrate pH since the beginning of the grow. Lesson learned for next time. Performed a heavy flush with 20 L of water per plant. Runoff dropped from EC 1200 → 500 and pH 7.1 → 6.7. From now on, I’ll water with enough solution to get ~20% runoff each time instead of just ~250 ml. Will also lower input pH to 5.6–5.7 to gradually bring substrate pH down into range. Noticed that some plants have started to give off a light smell 🌿. 09/28: Each plant watered with 1 L at pH 5.6, EC 950. Solution included 3 ml/L CalMag + 0.8 ml/L Coco A + 0.8 ml/L Coco B + 1 ml/L Deeper Underground. Runoff EC not measured (since heavy flush was done yesterday). Runoff pH still unchanged, same as yesterday (~6.7). Yesterday I lowered the light, today increased it back to 13.5k lux. Chlorosis is still advancing, hoping successive irrigations will help bring substrate pH down. 09/29: Watered again but with 500ml this time. Solution (same recipe as yesterday) at pH 5.6. Surprisingly, runoff pH rose higher than yesterday, now at 7.0, with EC 700. Light intensity increased to 14.5k lux. 09/30: Watered with 500 ml at pH 5.6, EC 1050. Solution included 3 ml/L CalMag (new bottle — seems to add more EC than the old one) + 1 ml/L Coco A + 1 ml/L Coco B + 1 ml/L Deeper Underground. Runoff measured EC 700–800, pH 7.0. Since the flush, stems have thickened significantly 💪. 10/01: Watered with 1 L at pH 5.6, EC 1200. Solution included 2.5 ml/L CalMag + 1 ml/L Coco A + 1 ml/L Coco B + 1 ml/L Deeper Underground. Runoff measured EC 650, pH 7.0. Substrate pH still not dropping, but plants are growing at a good pace. Only two plants continue to show chlorosis, while all show a noticeable thickening of stems this week. 10/02: Significant vertical growth observed — most plants stretched about 8 cm in the last 3 days. Watered again with the same solution as yesterday, but only 500 ml per plant. Input pH 5.6, runoff pH still at 7.0, EC 600–700. Chlorosis persists, and on one plant with symptoms, small brown spots appeared, suggesting a possible manganese deficiency. Also noticed what look like early pre-flowers (tiny pistils) on two plants, though it feels early for day 20. 10/03: Watered with the same solution as previous days (pH 5.6, EC 1200). Runoff remained stable at pH 7.0, EC ~600–700. Based on uptake, I plan to progressively raise input EC until EC in ≈ EC out. Gradually increasing VPD range, target for Week 3 is 1.0–1.2 kPa. --- 📝 Week 2 Summary 🚩 Main challenge: persistent high runoff pH (~7.0) causing chlorosis, initially resembling iron deficiency but later showing signs closer to manganese deficiency (brown spotting). Heavy flush reduced EC, but pH correction is progressing slowly. Plants responded with strong stem thickening and rapid vertical growth (+8 cm in 3 days). Aroma starting to appear on some plants 🌿. ⚡ Light stabilized around 14–15k lux, with adjustments to avoid stress. 🌱 Despite issues, most plants are vigorous, only 2 showing stronger deficiency symptoms. ➡️ Plan for Week 3 Irrigation: Increase input EC gradually until it balances with runoff (~EC in = EC out). Maintain runoff at ~20% each watering. pH management: Keep input pH at 5.6–5.7 to push substrate down from current ~7.0. VPD: Raise target range to 1.0–1.2 kPa for optimal transpiration. Light: Hold intensity ~14.5k lux, slight increases only if no stress observed. Monitoring: Track chlorosis spots closely — see if new growth improves once substrate stabilizes. Pre-flowers: Keep observing possible pistils.

They’re growing well. One of them is a bit behind.

Man what a busy week. I left for a small vacation with the family and left the plants in the care of someone and luckly everything is still alive lol. Then today I almost forgot to post my weekly diary because I was busy build my new grow office and moving all the equipment in. The room I built is where all the plants well eventually end up ones my coco and perlite arrive. So one plant is 2 weeks behind the other I believe. That's why one looks smaller then the other. Both plants tho are doing very well and are coming along nicely. Hope to have then in the autopots by next weekend. Well happy growing everyone

ABxRKO is about 42.5" tall, and has been top dressed with about 3tsp of grow dots to give it a phosphorus boost in flower HBSS is about 26.5" tall and has been top dressed with about 2tsp grow dots as I believe it is fighting a phosphorus deficiency. She is giving all the smells, a bright red starburst like fruity smell with a stark citrus note.

Fattening up every day and smelling amazing! Took out calmag supplementation and will start a flush next week. Starting to see a bit of senescence. She finishes at 8.5 weeks max consistently.

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Sweet Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Non ci sono parole, volevo genetiche violacee ed eccomi accontentato!! Risultato molto interessante in dei vasi da 14l entrambe, hanno uno strato di resina clamoroso. Odore e sapore sono tropicali, un classico per le genetiche violacee, ho anche estratto il polline ed il fumo a prima compattazione era color viola!! Consigliata a tutti!! Grazie a tutti per il supporto ❤️🍀🔥

Sorry For The Delay but I was kinda busy ......Anywho on 3/19 I Changed The light Schedule form 18/6 to 12/12 To Begin My Pre-Flower Stage I Also Bent The Last Few Uneven Tops To Have A Table Top like Canopy (LST) Also Cut Off all Little Branches (Lollipopping) To Prevent Getting Any Little Pop Corn NUGs. Then ON 3/20 I Increased My Light Intensity From 25% to 50% And began giving These Girls There Flower Nutrients Listed Above . AN Updated Video Of the Week POSTED ABOVE Video Taken About 3 Days After Making These Changes And yes The are All Showing to Be Females

Dear Growers , Welcome to Week 6 or Flower week 3 // Day 42-49 from Sweet Seeds Pineapple Slush Xl Auto. Incase of Moving to a New Home . I Decided to skip 3-4 Weeks from every Diarie of the 12x12 Automatic Project . Everything should be Normal in the next Weeks . Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sweet • Tent: 222cmx150cmx150cm • Light: 2x 720 Watt Full Spectrum • Humidity: 50% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 6 If you want Germinitation results like mine , check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the Checkout . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!

New flowering continues to develop on this lady, she seems to be swelling up day by day. Yellowing of the fan leaves has started which usually means it's time to flush, I need to check the trichomes to see how amber they appear before I do just in case the flavour or yield could be effected.

I know that it may seem like a lot of nutrients at first. It’s not. A lot of those mycorrhizae ingredients are mixed into my soil well before the germinated seed goes into the pot. I make my own mix of soil using some of those ingredients. I like to use the great white mykos because of its powders consistency. Makes it easy for a clean transport from germinated bean to its forever home. For watering, they have been given only plain RO water with a neutral ph. Just yesterday I gave them a little tiny mix of Medusa’s magic, Zeus juice, and Gaia mania. I have used Oregon’s only brand products for a while now and I absolutely love them and better yet, I understand them. They have responded super well already to their first drink of bottled nutes with a ph of 6.3 . I’m keeping a RH between 50 and 60%. I’m also keeping a temp during the day at around 78-81°f. Right now I’m not worried about a night time temp but I do run cooler lights for about 4 hrs every day, dropping to around 70-75°f. Eventually I will add my second light boosting me from 600w too 1200w. Also they will begin a 20-4 hr light cycle. I find these autos do amazing with a little rest for 4 hrs. Allows me to pull more resin and color in later stages of life by dropping the temp lower than usual with the lights off. So please if you will, stay tuned and I’ll have much more info and much better videos and pictures for you to all enjoy. Thanks for looking! ✌️🏻

Grew in freezing temperatures my tent was barely 16 celcius,

Bending leafs waiting for her to flower, a little bunt tips from feeding last night

Harvest ended up being a 14 day hang dry as the entire plant. Dry weight between both plants yielded 40 grams only. I did 2 runs of this. The genetics seemed very inconsistent. One plant was very small, and one plant was so large it was almost touching the light at the top of the tent. The bud structure was not great. They did make some pretty pictures though. The smoke is not bad, its smooth and has hints of fruit to it, almost like a mango or papaya. It also smells sweet. It could be used for daytime if you control it correctly. It doesn't hit you hard. Its mellow but lacks that sativa focus.

End of vege REPOT 14 l to 20 l with plagron batmix. 5.10 lights switch to SpiderFarmer SF4000 12/12.

Will update details soon

Living soil, organic

after the shimo #1 hermie branch suspicious was cut they thrive and even the shimo with the cutted branch seem to thrive, no signs of pollination or nanners 💪

New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter