Seeding March 16 Germination 21-25 march 🇱🇺🌱🤩 Day 65 from seeding, flower in full progress Grow method 12/12 from seed- Sea of green Hey Growmy's, everything looks more than good to me, 2-3 women are running a bit behind, but that will be fixed by itself so let it go, yesterday I increased my ec to 1.8 and my ladys liked it as you can see, think also hanging my lights in a couple of days to 30 cm above my cutys now they are on 46 .. but more from me in a few days again 😇 ⚠️⚠️ Short info about my Humidity: as you can see my humidity sensor from my CT grow system that I have is around 80% RH, but that is not right, my humidity  is around 49-52% my sensor gets 24 hours  fully blown by my humidifier  onto the sensor no matter where I hang it because my ventilation is all around and is blown from top to bottom and a box fan lets everything circulate through the growroom so my old hygrometer is hanging in there againe and everything is fine Amnesia by & for @Superstrains Official Runtz by & for @Zamnesia Webshop came in 1 week later Sour Diesel by & for @Inseedious NL Cobalt Haze by @Sensi Seeds  & Arjans Strawberry Haze by @Greenhouse Seeds  for @Amsterdam Seed Center Under & for @Mars Hydro Factory Nutes by & for @Hy-Pro Fertilizers Soil: Atami light mix & 5mm broken puffed clay & 16mm puffed clay on the bottem of my 5.5L. pots Temp: 24,56 °C temp outside 15°C Lights: 12/12 Humidity: 49-52 % Vpd kpa: 1.3-1.4 Roots 17.50°C Ph : 6.2 Tds/ec 1.8 Water: 0.8L. p.plant  23°C CO²: No Mercy Tabs & boost bucket Nutes by Hy-Pro Fertilizers HyPro : Spraymix 0ml by 1L. HyPro : Terra vegi & bloom 4.5ml by 1L. HyPro : Rootstimulator 5ml by 1L. HyPro : Generator 0.16ml by 1L. HyPro : Epic Bloom 0.5ml by 1L. HyPro : Cal-Mag  0.8ml by 1L. Light distance: =46cm to plant = 42 cm to CTgrow sensor dimmer on 100% = 1091.5umol/m²PPDF +-10 Gear all controlled by @ctgrow 1x MarsHydro TSW3000 1x MarsHydro TSL 2000 Air Van: 900m³ Prima Klima on 45% Filter: Prima Klima 660m³ for seed& veg stage & 660m3 CanLite for bloom stage 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   Big THANKS to my lovely sponsors : Super Strains,  HyPro Fertilizers, Amsterdam Seed Center, Zamnesia, Inseedious, BTB Grow Supplies, Mars Hydro & CT Grow Systems

9ème semaine de fruits pour cet dame gros collas, résineux une odeurs gaz les trich sont 90%laiteux 10%transparent.

Harvest has gone well PE 1 after 72 days and PE 2 after 67 days harvested PE 2 earlier by a week to see if there was a difference in taste or high compares to PE 1. Drying had begun will update further with weights once dried. Day 79 - PE 2 dried beautifully lovely tropical aroma coming from her, PE 1 will need more curing as Budds were denser. PE 1 - 30g PE 2 - 28.5g

Week 6: Aroma, Buds, and Excitement! 🌿🌸💨 Hey there, fellow growers! It's time for an exhilarating update on my flourishing journey. We've officially reached week 6 of the flowering phase, and let me tell you, it's getting pretty amazing in my grow tent. Here's what's been happening: The aroma that fills the air when I open my tent is mind-blowing! It hits me right in the face with its funky skunkiness, and I can't help but smile. These ladies are developing some seriously potent terpenes, and I can't wait to savor the flavors when it's time to harvest. 🌿👃💨 Speaking of buds, they are looking absolutely stunning. The development is on point, and the density is increasing day by day. I find myself gazing at them with a sense of pride and excitement. These girls are going to be something special. 🌸🌿🌱💪 I'm thrilled to report that there are no signs of seed pods or hermaphroditism. The ladies are staying true to their femininity, focusing solely on producing those gorgeous, resinous flowers. It's a relief and a testament to the genetics and care they've received. 🚫⚡️ To ensure their continued growth, I've upped the watering to 5 liters every two days. These thirsty beauties need their hydration! Along with the increased watering, I've noticed some oranging on the tops and a touch of purpling on the leaves. It's a delightful display of colors that adds even more visual appeal to the grow tent. 🌿🍊💜 As for the nutrient solution, I've maintained a stable pH of 6.33, allowing for optimal nutrient uptake. The TDS level has remained between 1150 and 1250, providing the perfect balance of nutrients for the plants' needs. ⚖️📈 With everything going so well, I'm buzzing with excitement for what the next week of flowering will bring. The anticipation of harvest is growing stronger, and I can almost taste the rewards. Happy growing, everyone! Catch you next week with more updates. 🌿💚🌸😄

Day 54-64 (June 14th-24th) (Day 55) I got a good look at all of the plants in the dark and all of them are quite faded out except for black garlic and the blueberries. Running multiple different strains that all feed differently would be a nightmare on a larger scale! (Day 56) Everything is looking on point and happy. Plants are drinking about a liter of water every 36 hours. (Day 59) Jack Herer #1 has some of the most wild looking foxtails I’ve ever seen. Not a very desirable trait but it’s cool to grow. It’s smell is pure bliss, it’s now matured to a mango funk. I will do a more in depth look at each strain after dry. Jack #2 is starting to pop fresh nanners. I think it is from stress due to lack of nutrients and/or heat stress from where it is in the tent. Both jacks are feeding really hard I’ve noticed. If these bananas get any worse I will just harvest early. Blueberry #1 is developing miniature seeds in its calyx’s and is starting to foxtail like crazy. It almost looks like it’s reveging. Earlier in the season I pulled off an entire bud that was covered in developing seeds but I couldn’t find anymore after that. I will likely find a few bag seeds in this pheno and Jack #2. Blueberry #2 is still terpless and frostless but it’s really starting to fill into it’s structure now. It’s getting impressively dense but that all it has going for it. This one needs to go 65-70 days at least. BAOGC #1 is so beefed up and chunky I love it. The main cola will be a good 6 grams and the lowers are thick gram nugs too. I will let this one go until day 65 BAOGC #2 is much smaller but a super hard feeder. It was one of the first to start yellowing. This pheno is pretty average in my opinion. It stacks a little tighter but has small buds TWOG #1 has this strange velvety look to it’s frost, something I’ve never really seen before. Although it’s a little on the leafy side. It filled out super early and is ready to harvest now. Both are fading out with black streaks on the leaves. TWOG #2 checks every box for quality so far. This might be the perfect strain and I’m sad I didn’t get a clone of it. The only thing wrong with it is the long trichome stalks and lack of resin heads. It is also an early finisher. I will probably take both TWOGs down on the 21st. Black garlic is just mouthwatering. This plant literally looks wet with resin. It was super airy at first but slowly filled out to the point it’s one of the denser plants in the tent. Cant wait to smoke this stuff. (Day 63) Well, every plant in here is looking done except the jacks and blueberry #2. Since I’m harvesting my other tent tomorrow I might as well give everything the chop before I risk bagseeds. I’m going to give a final watering right now and harvest tomorrow. I’m going to be drying in my flower tent kept between 60-65F and 60-65% RH. I will do a full plant hang to extend the dry time for as long as possible. Guess that’s a wrap then. I will give a detailed breakdown of my errors and final thoughts on the run next week after the dry is completely done. ✌️

Got some sealant to properly seal my DIY CO2 generator and lil maggie seems to like it. Her buds are starting to swell up. For the CO2 generator I did the following: 2 Liter Bottle -> 1 Liter Bottle -> Fan (Fermenting) -> (Water Filter) -> (Distribute) Ingredients: Sugar - 3/4 Cup Yeast - 1 Teaspoon Water - 6 Cups Step 1: Add 6 cups of room temperature water to the 2 liter bottle. Step 2: Add 3/4 cup of sugar to the water and mix until sugar is fully dissolved. Step 3: Add 1 teaspoon of yeast and let sit until bubbles appear in water filter bottle. 
Step 4: Direct the end hose to the plant canopy. CO2 is heavy so it falls, use fan to blow it to the plant canopy.

Con 22 dias, pasados 7 de la última poda de hojas y 22 del cambio de fotoperiodo me decidí por hacerles una nueva poda, esta algo más severa . Yemas, hojas y chupópteros de bajos. A partir de entonces solo se irán quitando muy de vez en cuando alguna hoja o algun brote o yema que pueda salir por ahí que no me guste, muy poca cosa. Me deshice de la malla, harto me tenia. La quité para la poda y luego me hizo mucha pereza volver ponerla. Prefiero menos cantidad. Esta semana explosión de tricomas

Fimmed this at week 3. Looking really healthy and started to show thricomes. Really excited about this grow looking like really good genetics from fastbuds.

Final week, things got really easy for a few days. The plants are eating less and less each time I check the ppm at the end of the day. It will be RO water only when topping up the res for the rest of the grow. Made an effort to lower humidity as much as possible seeing as I can't do cold stress. Triches are pretty much all cloudy and just waiting on some amber to show. Only seven plants made it in the end as a revegged plant was out competed and basically it might give an ounce. 1.235 2.440 1.920 1.385 .940 1.075 Combined wet weight: 8.99 kg or 19.8 pounds

Started the good and hot season with an adjustment refilling of soil the pot of the little one and giving more to the other two. Incredible grow in two weeks going from being near dead to being big as the other two.

Пришло время сбора урожая. на днях все оставшееся уберу :)

Will update week comment soon.

19/12/2022 Lollipopping per la maggior parte delle gemme e taglio dei rami meno esposti alla luce 21/12/2022 Annaffiata abbondante per tutte le piante, 1 litro per vaso 22/12/2022 Ultimo taglio ai rami e foglie sotto la rete, domani mattina le bimbe andranno a dormire 6 ore prima del solito :) Settimana con un pò di dubbi, volevo iniziare la fioritura dopo 4 settimane di vegetativa ma ho preferito asapettare qualche giorno, il 23/12/2022 Alle 7:00 la luce si è spenta per le ragazze invece che alle 13:00. Speriamo bene!! 🙏

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)

Quarantesimo giorno tt procede benissimo

steady as she goes.

Auto Opiym is in flower and with some cooler night temperatures in upper 50s low 60s the buds and leafs are changing colors🤩 The feeder leaves are yellowing and the sugar leaves are changing to purple 💜 . I top dressed with 2 tbsp bloom soil as fertilizer. Her limbs are spindly ans can't support the weight of her buds. I added a hoop to support branches but many just bent over the wire. I don't see many amber trichomes so I wait.