Very strongly cut off, I prepare to the beginning of flowering, he released a call that for some reason had a pair of leaves, because of which it turned out to be a little more torn off than it cost, I will give her a couple of days and we will begin the translation into flowering, also revealed a call which has 3 points of growth on each floor. Changed lighting: 37 watts white 55 watts blue, 38.5 watts red, Today I fully watched the side lighting and the electrics, controlled from a smartphone similar to the top lamp

This grow was pretty simple ! They went a total of 103 days from seed! Very trichomy dense buds with the smell of Berries vanilla and skunk ! This is a must try for you all Fastbuds has the greats!!!

5/23/2023 Week 7- Day 1 of Flower (Day 110 overall) (Day 49 of Flower) There was a couple of small super small sucker buds on the lower stocks that needed to be cleaned off but that was it. Just watching them Flower!! 5/24/2023 Week 7- Day 2 of Flower (Day 111 overall) Tucked a few fan leaves below lower buds but didn't see any blatant offenders that needed to be removed. I typically do start my checks in Week 8 but since this is a new strain I decided to go ahead and do a Trichome check just to see what was what.. Just as I thought nothing but clear glassy Trichomes. I will check again in one week.... 5/25/2023 Week 7- Day 3 of Flower (Day 112 overall) Just letting them grow today!! Smell is getting stronger I would say it is a hint of Pine and a heavier fruity smell. 5/26/2023 Week 7- Day 4 of Flower (Day 113 overall) I did Nothing but took some pics and I enjoyed it!!!! It is nice to be able to just sit back and watch them on auto pilot.. :-) Tomorrow Water Change Day!! 5/27/2023 Week 7- Day 5 of Flower (Day 114 overall) I admit it.. I had to defoliate a little bit.. I looked in while changing the water today and there were just a couple blatant offenders blocking the light from lower bud sites and those leaves they just had to go. Other than that I changed the water and this week is where I drop everything and start preparing them for this last phase of the grow. Loving a few of these buds they are starting to beef out very nicely. I added 36 gallons Mammoth Silica = .5Mil/Gal= 18Mil Root DRIP = 1Mil/Gal= 36Mil CalMag= .5Mil/Gal= 18Mil FloraMicro = 3.8Mil/Gal= 137Mil FloraGro= 2.8Mil/Gal= 100Mil FLoraBloom= 4.6Mil/Gal= 166Mil LiquidKoolBloom= 2.5Mil/Gal= 90Mil TPS SIGNAL= 4.0Mil/Gal= 144Mil ORCA = .5Mil/Gal= 18Mil Water Temp= 70.1 Tent Temp= 76 Humidity =64 ** I have two dehumidifiers running on Ink bird controllers to try and keep the humidity down, In late in flower I like to keep the humidity above 45 but below 60. 5/28/2023 Week 7- Day 6 of Flower (Day 115 overall) Opened the back of the tent today and boy did she need some defoliation love in the back. Other than that I took off a few little sucker buds trying to form. I did start to setup my Dry space as well as did a Trichome Check today and the brown tips are coming in nicely. 5/29/2023 Week 7- Day 7 of Flower (Day 116 overall) Found a few baby sucker buds trying to form so I removed them. Other than that I am enjoying watching her mature. I also started my Reverse of the Clone I took 6 weeks ago in Apr from #3. I am uploading footage of the reversing process for your viewing pleasure.

This strain is phenomenal every time I've grown it and it's usually once or twice a year it seems. Definitely love everything about it and the new RF3 version speaks for itself. This time I decided to run 16 of them and really get a good idea of pheno expressions. I'll be making extracts out of this one, the FreshFrozen Rosin is next level it can produce. Happy Growing.

The girls are little stressed I topped them for the 3rd time and performed some super lst I just released them of the lst and feed them some homemade labs and Recharge other then that they are doing great stay tuned thanks for following

Wow she looks awesome!!!! I really don’t know what else to say. She smells pungent with a fuel odor. She has big buds buds big as my head!

Day:56 from germination 16H FullSpectrum 2H Red+Fr+RB+Uv Avarage Par 1000-1280 120*120 Single Hydrophonic 1000ppm 6.4PH

Hey everyone :-). This week she continued to develop very nicely 😍. I started with LST training and topping 😊. The training took it very well and after 1-2 days it grew again immediately 👍. This time it will be an extreme bush 😂👍. It was poured once this week with 1.2 l. Otherwise there is nothing to report this week. I wish you all a lot of fun until the next update. stay healthy and let it grow 😀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Start of week 5. Taking shape I guess. Don't like what's been done to her but I'm commited now. I think she is okay leaves are a little dryer then I think they should be. I'm not sure if it's all the torture she had to endure at my butcher finger tips but I will watch her over the next few days. Last day of week 5.. day 34 tidy up of the main line and removing all growth below second nodes on the mainlines. Gonna let them rest while i decide if we go for 8 or 16. Stay safe everyone. The world's a crazy place ATM... Happy growing. 🤩🤘🤪

Chopped And Hang drying I lost count of thow many days in flower But I know its over 100 days I'll be making canna oil with coconut oil And canna oil with MCT oil

expected flowering: 7-8 weeks Germination method: cotton disc with tap water with 4ml/l root juice and 1ml/l acti-vera Tent: BlackBox Silver 90x60x180cm (3'x2'x6') Extractor: 220 m³/h Soil: Biobizz All-Mix SF-2000 @85cm @50% germination: 10/11 They took a little longer than usual to open up, all but one seem to grow vigorously enough afterward. sprout: 9/10 ; 9 transplanted in soil at first then another one transplanted 36H later i may transplant the last one if the root finally start to grow. First two are showing 20h after transplant. 35h after transplant 7 are showing. 42H after transplant 9 are showing and seem to form their first set of true leaves normally. Last one showed a little later but doesn't seem to form it's first true set of leaves.

massive growth in this girl. i decided to flip them both cuz they are in a 2x2. trying to get 12 tops. 6.3 ph 1800 ppm run off. the one girl goy reckt by knats so her roots got stunted. haven't decide what to do. toped her and she grew strange. gonna bump up the lights a bit maybe she streached out to much. topped one last time in the 3 gal. cal mag and silica only for now.

Lets gooo

Buds are starting to fatten up great. The smell is wonderful and they are now in the final stretch. Water only no feed until harvest from here on. I stopped defoliation as I feel they did not take too well to defoliation, and took roughly 3days to recover fully. PPFD is at 1200 yes i love pushing this into the higher range duringbflower, but only if the plants can handle it. The frost is starting to cover the buds and rhey are rock hard!! Excuse my photos, I have full spectrum LED so light spectrum can't be changed for better photos. Lower foliage is starting to die off and I expect this to now continue throughout the larger part of the plant with plain watering. All in all getting excited.

Still 60W 30-50k lux D4: ~35% dried stigma ~70% milky trichs, almost no amber

Week 4! We've had some really strong wind and sun here, which I now know is a good thing lol. I love this stage because she's basically in kaleidoscope mode with the leaves. Still no sign of preflowering, but I believe I detect a faint citrusy scent. I was spoiled by starting with Pineapple Expresses, which smell absolutely amazing and then got bamboozled by a Zkittlez that is just so very dank. So I'm happy this one seems to be living up to its name and smells a bit orange-y. I don't know how to add biotabs to the nutrients section on here because it's set up for liquid nutrients I think, but I added two BAC biotabs (https://www.dutch-headshop.eu/bio-tablets-soil-improver-bac-12-pieces) to the soil at 13 days from seed and won't be adding anything else than watering some Bud Candy once she starts to flower. Otherwise, I'm watering the cloth pot when it feels light.

COMING SOON!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The flush week! Seemed ok - def had nitrogen toxicity in one purple berry kush - maybe too much ripener before. But we’re here - will give them the 24 now and chop. We’re out of time on this run. 90^% of the crop are where I want them to be however I thought I would have more droopy leaves. Will do the harvests on Monday anyways. Have a great week. Tried to edit best j could to do them justice. We were taking pics for the v1 so I brought them all out for a dance. Aroma strong 😂. Take care everyone. Just keep going and keep on bloomin

Day 33 They're starting to get that sweet-cherry smell. Especially when you rub the resin between your fingers. 🍒 PPFD at max 1200, avg 800 VPD at 1.4