I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!

Plants are doing well I've started slowly introducing bloom nutes on all but the dynamite which are both 2 weeks behind the mop and og kush. They have been asking for water everyday now so I just been watering in am if its gonna be sunny all day I water. #1 orange punch is way further than all the others the buds are getting big on there. Been spraying with bt and neem oil once a week. Taking some yellowing leaves off once in a while. The smell is strong now my whole back yard smells like weed lol.

For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.

Tea once a week going nice;)))))

This is my first grow and I'm following the canuck method because it's the easiest . Eventually I would like to get into high frequency fertigation with a coco medium but I want to produce a great smoke in soil first to get some experience.

Eccoci arrivati al termine..amici grower missione compiuta anche con questa watermelon.ora che sia anche bella dolce e forte soprattutto 🤣😂💪✌️🕉️ boom Shiva Shankar

Cruise control... Did a rez change, fresh new RO water + added calmag and nutes totalling 750ppm. Not much vertical growth. Buds fattening up now. tied up some of the branches and defoliated a little to allow more light penetration.

New Aeroponics "root rain" mist cloner! Holds 2 gallons of water. I added 8 Tsp of CloneX clone/seedling nutrient. PH was 6.0-6.5ish, good enough! These clones inside got zapped pretty hard one day, because I forgot to plug in the water pump one time after playing with it hehehe... Some didn't make it, but most survived! every other plant was watered with just de-chlorinated tap water, for re-hydration. #4 has been selected as the winning pheno! The mother plant had her home upgraded to a 2gal pot. The root ball was not so bound, due to her receiving a root-prune not too long ago, she was re-potted back into a solo cup. I pruned the bottom of the root mass off with a light pinch, and potted her into her new 2gallon home!

Northern lights always has this amazing purple to it. Hitting a bong of the outdoor now actually very smooth and a decent high cant wait to test the first indoor run of this strain.

1 plant is not looking good; no signs of bugs; yellow spots have seen.

Ok couple days into week 10 second week of flower I may have mixed a little stronger as getting too burn so on last feed used some clear and oh water turned light down to 600 watt also changed bulb to hps also tops looking yellow but might be just me also Atco stray of week 10 I trimmed a lot of leaf and unwanted branch’s off so will see how the year like it next feed will be half strength I think try that still on feed water schedule added another bag of co2 not sure why but whatever I also keep bending through the netting

BIGGER:STRONGER:FASTER #NITROHAZE #OUTDOORGANG D55 ah sido una semana muy fria con nada de sol en los ultimos dos dias, se sigue estirando y creciendo. Las noches frias y humedas mantienen muy humedo el sustrato... intento regar poco y solo con nutriente. Delta 8 y 9. 1 riego semanal de micorrizas-wonderland. D57 hoy porfin es un dia con sol . Todos los dias anteriores a partir del dia 50 fueron muy frios y sin nada de sol (Estamos entrando a invierno en mi localidad), la tierra se mantiene muy humeda por lo frio de las noches, intento regar solo una vez a la semana y es con fertilizantes Cannabiogen. Aun no vuelvo a regar foliar con jabon potasico, pero basto con un riego para eliminar bichos de la planta. D60 Nos cambiamos de casa, por eso tambien comenzaran a variar laa horas de sol directo a medida que vaya viendo horas de sol y acomodandome en la casa nueva. Se ve super sana ah crecido bastante, quiero hacer algun corte (FIM o Apical) pero me da miedo de afectar algo. Temperaturas siguen bajas, poco riego porque mantiene el sustrato humedo por el clima. Y solo riego con 1LT de agua y soluciones nutritivas cannabiogen. D61 Hoy no aguante hice corte FIM. Una vez que en las ramas secundarias crezcan dos nodos hare apical en esas ramas, el cambio de casa me obligo a realizar stress FIM. Proximamente le sumare LST

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

09/17: Well i am feeling defeated at the moment. I broke of a couple of branches on PL1 when attempting to train when i should not have been. Im feeling like a rookie at the moment. She was too full of water to be training her so aggressively. I have tried to tape back one of the broken branches, and so we will see if she recovers. Ive done this before and taping it back ended up working, but I am not optimistic this time. To make things worse, i used perlite that had “fertilizer” in it, did not realize it until it was too late, and they are dealing with a nitrogen overload. I should be hooking to water up already, but i want to let them dry out a bit so that i can properly finish off some of the training. Will do that and then hook up the water tomorrow or Thursday.

Day 55 - going into the 9th week..... trimmed em, stabilized the flowering solution.... lookin nice..... buds startin allll over... haha 👍😎

Its flowering week 2. I’m starting to defo/Lst more, Plants stretching a little to gain more light.😇

Spargeln extrem!! Sicher 3 mal so groß wenn fertig. Als beim start