12/30: 2ème semaine de flo. En 12/12, des pistils commencent à apparaître photo dans la prochaine mise à jour. 01/02/22: la floraison à démarrer pour de bon. Maintenant vous falloir lui donner toute l'attention et l'amour possible pour avoir un bon produit et une bonne récolte 😆🙄😎😀🐢🐢🐢🐢🌱🌲

Pretty decently easy grow, no complaints! Stoked to pull 6oz in a 10 week grow -- autos ROCK! This smells great! The buds were MASSIVE, I was a little skeptical of jarring them that big and decided cut them into smaller nugs just to be careful with mold issues. Will update and finish this review in a few weeks once they've cured!

*** 17.10.2017.*** Today i decided to start week 4, one day away from the actual begining of the next week... She showed few calyxes that are shooting white hairs so i guess her flowering window just started so i gave her a good solution of flowering nutes, boosters and sugar. I am so thankful that my effort is paying off, 7 days development on this automatica strain is the best progress i have seen so far in my short but rich growing experience. She responded very good to all my moves, i decided to show you all what a proper LsT can do to your shape and groeth, and supercropping aswell.. The fishbone look is something that really caught my attention and will be perfected in my next grows. Stay tuned and kisses from White and team Wolfpack 😎👊 P.s. @growdiaries i am havin problems with uploading calyxes photos, they are resizing forever.. all good out there? :D

I messed up big on this one so I think I was very lucky to get what I did...she had problems the moment I switch to 12/12 she even went 3 weeks with no watering at one point so I decided to just flush and chop so I could Lower the light for the purple glue

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Week 5 for 9lb hammer, has been topped once. Still only getting fed plain water, its going to be time to introduce some FPJ soon to her feeding. Still waiting for some gender signs to reveal themselves, when it does so ill be starting to transition them outdoors. Added a little sneak peek of the other 4 siblings in the video that are also waiting to reveal their gender. (the 4 siblings are a few weeks younger... but don't have an exact date for them, forgot to note it down) Mind the colouring in the picture/video as i try to make them less yellow from the HPS light😂

Привет друзья. Моей растихе сегодня 137 дней Всё утеплил. Отопление сделал. Девочек своих отогрел) 20.10 перевёл свет в режим 12/12 Начал применять LST технику на 19 дне, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ С 20.08 LST технику На сегодняшний день влажность 54% 5.09.2023 заметил высокий Ph 7.9 С 48 дня Ph не ниже 5.8 На сегодняшний день Ph 6.0 Начал кормить с 60 дня Canna Terra Vega PPM 870 Всем мира и добра! Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

This diary should have been updated a long time ago but the lack of time and mine reluctance to actually go back to the time of harvest, I did delete most of photographs of the harvest in rage as it was not a nice memory for me, here is why. So the last update i made to the diary was on 19 September and already then i knew something was brewing because we had a week long rain spell and it did not look like it was about to stop at that and the weather forecast showed a month more of rain. Without that rain and high RH i would probably give them girls one more week under the SE 7000 :/ The weather forecast was unfortunately right, so all in all we had around six week of relentless rain...outside it was from 90 to 95% RH in my house it was mostly 85%RH and in my grow room which is located in a basement i had from 60 to 63%RH with lights and dehumidifier on and around 70% with lights off. And that was a killer for my tightly packt grow room. What i did was to open all the walls from the grow room at dark time and had two big external fans blowing air at my plants but it did not help much... My first observation of bud rot was on 24 of September while making photographs of the beautiful buds. That week i lost to bud rot 4 bud stems, after the chop while drying i found another 5 infected stems, and by final trim just before jaring them i removed one more. So all together i lost to bud rot 10 bud stems, four of them were really big ones. I had made some pictures of the buds with bud rot and of the buds hangin in drying room but they did not survive my dark mood :( Sot thats the reason i got only few photographs to show for it. The final weighing was actually not as bad and lightened my mood a bit, that and that that i did not found any more mold on my cured Killer Kush :) So the dry weight after curing was 720 gram of dry bud I still till today did not make # from all the trimmings...but the trimmings are properly dried and waiting for bubble bugs in my freezer. After this learning experience i decided to add at least one more 30W air mixing internal fan, and i did get to know one of my relatives possess a 300W dehumidifier so next time i will be better prepared. Maintenance wise i will try to defoliate and lollipop my plants more aggressively to let in more air penetration.

DESCRIPTION: I have: 2 DWC pots 25l, 2 MarsHydro led 150w and 100w 2 seeds wedding glue auto 1 grower cat 🐈 STRAIN INFO: WEDDING GLUE AUTO Indica: 60% Sativa: 40% Taste: Earthy, Sweet, Vanilla THC: Up to 26% CBD: < 1% LEGENDS: 📆 Day - 💬 Note -💧 PH - 💦 Ppm - 🍼🌡️ Water temperature -📏 Height - 🌡️ temperature - 🌗 Day/Night hours - 💡 TS1000 power 🍏 AN pH Perfect Connoisseur Grow A/B 🍎AN pH Perfect Connoisseur Bloom A/B 🍬AN Candy Bud 💊AN B-52 ⛱️AN Nirvana 🐟 AN Piranha 🥥 AH CalMag REPORT 📆 22.08.21 (Day 1) 💬 Just borned 💧 6.5 pH 💦 220 ppm 🌡️ 24с° 💧🌡️ 19с° 🌗 24/0 h 💡 20% ---fertilize---- 🐟 0.2 ml/l 💊 0.2 ml/l 🍏 0.0 ml/l 🍎 0.0 ml/l 🍬 0.0 ml/l ⛱️ 0.0 ml/l 🥥 0.0 ml/l 📆 23.08.21 (Day 2) 💬 Now it's just growing =) 💧 6.5 pH 💦 220 ppm 🌡️ 24с° 💧🌡️ 19с° 🌗 20/4 h 💡 20% ---fertilize---- 🐟 0.2 ml/l 💊 0.2 ml/l 🍏 0.0 ml/l 🍎 0.0 ml/l 🍬 0.0 ml/l ⛱️ 0.0 ml/l 🥥 0.0 ml/l 📆 24.08.21 - 29.08.21 (Day 3-8) 💧 6.4 pH 💦 440 ppm 🌡️ 24с° 💧🌡️ 19с° 🌗 20/4 h 💡 20% ---fertilize---- 🐟 1 ml/l 💊 1 ml/l 🍏 0.5 ml/l 🍎 0.5 ml/l 🍬 0.0 ml/l ⛱️ 0.0 ml/l 🥥 0.0 ml/l 📆 30.08.21 (Day 9) 💬 Add fan for "wind". Alisa show her root, Lisa is shy so far ) Raised fertilizer content and up to 50% power LED 💧 6.5 pH 💦 520 ppm 🌡️ 25с° 💧🌡️ 21с° 🌗 20/4 h 💡 50% ---fertilize---- 🐟 1 ml/l 💊 1 ml/l 🍏 1 ml/l 🍎 1 ml/l 🍬 0.0 ml/l ⛱️ 0.5 ml/l 🥥 0.0 ml/l 📆 31.08.21-0.3.09.21 (Day 10-13) 💬 TOPING all gilrs 💧 6.5 pH 💦 520 ppm 🌡️ 25с° 💧🌡️ 21с° 🌗 20/4 h 💡 50% ---fertilize---- 🐟 1 ml/l 💊 1 ml/l 🍏 1.5 ml/l 🍎 1.5 ml/l 🍬 0.0 ml/l ⛱️ 1 ml/l 🥥 0.0 ml/l ________________________________________________________________________ 📆 Day - 💬 Note -💧 PH - 💦 Ppm - 🍼🌡️ Water temperature -📏 Height - 🌡️ temperature - 🌗 Day/Night hours - 💡 TS1000 power 🍏 AN pH Perfect Connoisseur Grow A/B 🍎AN pH Perfect Connoisseur Bloom A/B 🍬AN Candy Bud 💊AN B-52 ⛱️AN Nirvana 🐟 AN Piranha 🥥 AH CalMag

Barney's Farm es increíble Kush Mintz simplemente espectacular, linaje critical x kush no tiene fallo posible, y si ya la cruzas con una mintz.. muy buen trabajo breeders, cogollos duros como rocas y buen tamaño Toca secar y valorar todo en unos días 😜

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ TIMBER!! 🌱✂️🐱... We have 4 dry boxes packed like the one pictured.. there has to be close to 2lbs here!! Berry terpenes have invaded every floor of the house!! it's sooo heavenly 🙌.. we oven dried a small sample and she's potent, we'll update a smoke report and rough weight in about a week..thanks for dropping by and happy harvests everyone!!❤️🌱 ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

So this week went great... Things are going super well, and the plant leaves are getting larger - I'm trying my BEST NOT to pull or pinch any leaves that are in the way, as to not stress out the plant! She's drinking well, and I'm making sure not to over water... We're going to be able to start LSTing soon!

Nach nur 3 Tagen gekeimt, FastBuds Qualität... Eingetopft in den Endtopf.. Bon Appetit little Madame Apricot!!

Both plants are thriving. The mimosa still growing fast despite the fact it was burned by the light. The bourbon berry is trying to keep up with the mimosa plant.

Hello my friends, ...June 7, 2022.. ..Day N°87... ...Flowering day N°31... My two Feminized Royal THCV are fine and beautiful, they are monster plants, the stretching seems stabilized and the flowers smells awesome sativa. #1...140cm #2.. 145cm I give them water with a tablet of Easy Micronutrients from RQS Organics Nutrients. They are under a MarsHydro TSW 2000 at 70% of power and at 20cm of the canopy. www.royalqueenseeds.com www.mars-hydro.com www.marshydro.eu Thank you very much for passing by. Wish you the best with your green projects, peace. See you soon 💨💨💨

👊