Likes
Comments
Share
Ladies are getting fat! As of day 69 (Feb 12) we have started CropSalt CAKE feeding. Time to get even frostier and fatter. They are still drinking over a gallon a day each easily. If you have any questions for me, please feel free to ask! I want to help others grow Autoflowers like this.
Likes
31
Share
@MMSC16
Follow
These girls had large growth spurts. The plant buds packed on volume in the last 2 weeks. I let some deficiencies run about a month prior harvest, which I'll make sure not to do in future. Roughly a quarter pound of nice buds + trim.
Likes
7
Share
@Canna96
Follow
Hey now, I hope everyone is having a great week. It was a good week again for the 5 mainlines, I did some final LST to try and keep the mains level, and I also defoliated the lower leaves to improve the air flow. I am still feeding the same veg nutrients which is just amor si, cal mag, and maxi grow. I will start transitioning to flower nutrients tomorrow and I will gradually switch over to all over flower nutrients by the end of the week. The ladies are about 24" inches tall, but I do anticipate them growing some more before the stretch ends. I am pretty much done with LST at this point, I will just continue to defoliate as necessary and make sure they are enjoying their environment. Still very happy with the Spectrum X from Medic Grow. I am running her at 69% and the plants seem very happy and healthy. The heat and humidity are finally letting up in my region so it is nice to be able to open some windows and drop the temp outside the grow tent. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
293
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep maturation, End is very close, Harvest in few days 💜🌲✂️🏁🏁 Flush Started 💧 Give water each 2/3 day 2l Water + Flash Cleaner (3 ml/l) 2l Water + Flash Cleaner (3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 13 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Gorilla Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/gorilla-cookies-fast-flowering
Likes
21
Share
@Stick
Follow
This week was half veg half bloom. I may have to find a new home soon so I've decided to flip all my plants into flowering by the middle of week 08. This lovely AK-420 is the smallest plant in the room, but probably the cutest. Her tight nodes are ready to explode with flowers and her stalks, hidden beyond large leaves, are strong enough to support heavy buds. She had a slight Calcium deficiency that was treated immediately and the recovery was quick. I'm confident she will become a nice bush. She no longer has the canopy ring, in order to "let her breath" and grow vertically. Wait & see! 😎
Likes
4
Share
@PotusArg
Follow
Durante la semana 6, las plantas continuaron con su desarrollo habitual, y la verdad es que no ha habido cambios significativos. In week 6, the plants continued their usual development, and honestly, there haven’t been any significant changes.
Likes
21
Share
@BlaKX
Follow
Ai Gude Growmies! Was für ein Traum vom Frostigen Harz Baum ist diese Mimosa Cake Auto 🍹 🍰 und hat mich dermaßen überrascht was für ein Harz in so kurzer Blüte Zeit erreicht wurde inklusive Terpenen wie in der SORTEN Beschreibung angepriesen! Ich war so skeptisch gegenüber Autoflower und viele sagen sie gehören nicht indoor balblabla... deswegen habe ich sie auch nur auf 18/6 gelassen und sie nicht getoppt. Wollte ihren Vorteil genießen sie normal mit wachsen zu lassen und ab Blüte extra 660nm Deep Red Adlite. WoW
Likes
4
Share
@Facocero
Follow
È iniziata da poco la 4°settima, sembra stiano crescendo bene le piccole😍 in questi giorni mi sono dedicato a un po' di defogliazione e di giorno in giorno cerco di migliorare LST per favorire la penetrazione della luce. Alzato il dimmer al 75% e ho allontanato un po' la lampada dalle piante e sembra stia o reagendo bene! Spero tanto di fare un buon lavoro! 💪 Ai prossimi aggiornamenti! AGGIORNAMENTO: Sono passati 2 giorni dalle ultime foto pubblicate, si stanno infoltendo per bene le piccole😍 aspetterò ancora un altro po' per mandarle in fioritura,vorrei riuscire ad occupare più spazio superficiale possibile. Sto alternando con le annaffiature fertilizzando moderatamente una volta si e una no.. per il momento sembra tutto ok!😎
Likes
12
Share
Increased feeding to 3ml FP on day 35 & light to 40% (abound 18-20000 lux) today on day 36, greening up nicely.
Likes
57
Share
W16 - after a pretty hot week ESTHER shows some signs of existing on the dry side of her life. This made me concern about her well-being. Perhaps I slightly overlooked her recently in regards to watering. Nice weather ☀️ and beer gardens 🍻make me forget about her Also during a LST and my inattention, I damaged one of the branches 🙈 I taped it quickly to the main cola, thought that should help. After few days I removed the tape and check on it. By touching it I made it even worst. In the end, I remove the branch, cut off the loose end, and put it in the glass of water to prompt the plant to grow its roots. I don't have any idea what I am going to do with this... So after 4 months of quite smooth growing with a few bumps here and there, I had not the best week in the office 😕 I need a hug 😔
Likes
6
Share
The seeds popped and are looking good in the humidity dome. I didint use rockwool. I wrapped a paper towel around the tap root and wicked it to the water
Likes
Comments
Share
@Piro420
Follow
Some light burn on some tops but looking like some very fat nice nugs. Sticky and smelly I have a good feeling the terps are going to be
Likes
5
Share
La pandemia kush es la más avanzada y se le empezará a regar solo con agua al igual q la Trimosa x mimosa_1 La Trimosa x mimosa tiene un problema con absorción de agua, pero ya está siendo solucionado
Likes
15
Share
Week 27 for Gelato 41 by seedstockers, Shes survived the caterpillar attack 😂 Have found a few spots from bud rot from high humidity cant really help that as weather has been terrible just storms after storms of heavy rain 😐 dark clouds not much sun, we still have more rain coming with highest of 21 degrees...😒 Shes coming very close to her harvest window maybe 2 weeks time. Shes probably ready to come down but i want to push it a little longer because of those sativa traits.
Likes
7
Share
I've enjoyed a lot growing this plant, I had to deal at tje end of thr cycle with fungus gntas but she resisted without problems, each day the flowers stink more and more, amazing genetic, I would definitely like to keep on working with this genetic, it's a pleasure to smoke, I recomend you to grow her organically like I did snd you'll see!
Likes
4
Share
* 10/22 -Cherry Cherry Cola Auto - 10/22 - 9.5 Inches * Thus far no concerns and she is growing vigorously, switched out Myco (Using Myco+ from Element) and increased nute and clean water feeds to 1 gallon per day offsetting the clean water and nute water feeds. Lite LST with bend clips applied yesterday (10/21). * End of Week - Veg week 5 - 10/28 - Thus no issues or deficiencies, slight increase of veg dose - Defoliation will begin next week.
Likes
21
Share
@Whitebelt
Follow
Beginning week 9 Plans this week: Make a long time lapse while away this weekend - post more photos too Lollipop Tuck and tie a bit Possibly build a second scrog level?? Thoughts anyone?? Research and purchase or build a “grow room controller” - tent: temp, rh, light(?), co2(?) — rez: ph, ec, temp, water level - maybe more stuff like tie in the cameras, also basement temp and rh, fan and lights and pump contro. Nutrient dosing and ph control would be awesome but likely too pricey— but I’m a geek and this will be fun! I’d prefer a prebuilt system but I’m not totally opposed to building an Arduino/pi style solution (reliability and time to get it right are concerns tho - plus I have an arcade cabinet project I’d like to get to soon) — **ANY THOUGHTS OR ADVICE ANYONE??? To do list: I picked up some angle aluminum and I plan to finally make a single frame for the numerous LED lights Mount things to the wall (temp and humidity sensors, timers, utility light, etc) General cleanup and house keeping - wire management etc Install new portable air conditioner in the basement - this will be a bit of a project - casement windows and other issues Hopefully this week: install a utility sink in the basement and tie into the water lines and waste lines of the house (no more carrying water and waste upstairs!!)
Likes
11
Share
@Hawkbo
Follow
This one got a late transplant it's only been in the new pot for 2 or 3 days, the other one is still in a solo cup I might put it in a 1 gallon bag as a back up but I'm tryin to keep it to 1 of each strain other than the gelato and lemon ak. They got moved into the 4x4 with the jimmy rigged 180w quantum board light built from ceiling tile grid. The tnb co2 is newish but I gotta get the heat up and bring in a more powerful light to take full advantage.