Start of Flower. PPFD avg. 700 Soaked entire pot. Started my Flower Foliar Spray right before lights out. I will Spray plants once a week for 4 weeks of Flower. Foliar Spray Recipe per 2L as follows: All Advanced Nutrients Products. 4ml Bud Ignitor 4ml Nirvana 4ml Bud Factor X 10ml B-52 Midweek update. Second round of foliar spray. Ladies loved the first round, went with a second. Ill do this twice a week until I'm through week 4 of Flower. Video is right after I sprayed for the 2nd round at 15 mins before lights out. Don't want all the foliar spray burning the ladies now do we.

Tip#5: keep your reservoir cool in the heat! Invest in a water chiller and be done with it. I’ve been using frozen water bottles and wreaking havoc on my roots. I was also slow to put styrofoam blanket around my reservoir and wrap with aluminum foil. I should have had that all in place not being reactive to the heat. I've had her Outdoor all week approx 9 hours sun and 3 hours cloud/shade day. This week temperatures are soaring into the high 20s low 30s. To keep roots happy, I use ice bottles in my reservoir when hot. I try not to let the leaves go into full stress mode i'll just have them hovering near that point. I'm on the north facing slope so the shade arrives just when the plant is starting to stress out. Running grow tent lights 530am-530pm is most ideal you can get in my spot. I cover my reservoir so the sun doesn't penetrate my basket and heat can dissipate. Night temps are down to 12 outside but in tent it is stable above 17c. I planned for budding in this weather window because of the temperature drops is said to help with terp development. The second picture shows how important calmag is to healthy growth. Experience with RO water has taught me a lot about plant calmag intakes. Too much you'll burn tips and chance lockout, not enough can cause widespread cell death and slow growth. I halfing her calmag dose now she's in 4th week of flower. I'm also removing big bud from my nutrient line after this week's reservoir change. Midway through the week wildfires are raging creating ideal conditions I don't have the resources to mimic. high CO2 ppms and high red spectrum light. High UV light which is damaging is being refracted into more absorb-able light. Temperatures also didn't peak above 32c today with the smoke cover and haze breezy winds: it peaked at a balmy almost perfect 27c. My prayers go out to those affected by the wildfires. LST training today opened up more bud sites to the light. Now she no longer fits in the 2x4 darkroom tent so I had to modify a lil. Stretch phase done It’s nearing end of week and she's drinking two 1.75 litre pitchers of solution. I refreshed my reservoir and will top up with a more concentrated solution as I think she's getting more piggy. I added h2o2 to reservoir at the wend of the week.

Flowers beautiful flowers! 🌺 to start of dynomyco has really done it’s job with the purple urkle and she already in bloom and is nearly to the second scrog, the grape ape has ONLY just started her stretch as she’s right at the first scrog about to push through as she only just pushed pistols today and I’m putting that down to her healing through transitioning as I had to trim her leaves and lower stems during transition as they’d be a problem later on! But all in all a great week and on my way to a great flowering!

Cheers to Jimi Hendrix

In all this was a terrible harvest, and because I also do videos for my YouTube channel I don't update on Grow diaries properly which I will start doing with future grows.... Well on my next harvest will definitely do a better job of documenting my harvest details. But in regards to the Dark Phoenix, yeah not a strain I'm a fan off. At first I kept telling myself that I done a terrible job that's why i don't like it... But I need to keep in mind that I'm not going to like all strains, all strains are different and we all have different preferences. Some people might like the Dark Phoenix, me personally I'm not a fan. It has that earthy taste to it... Hashy/kushy...... Smoking it as I'm typing that's why 😅 and even with a longer cure I doubt it would make much of a difference to make me like it. But in all still a nice smoke, good high from her, the high hits you straight away and keeps you active and creative.... Don't know what else to say about her really, just trying to give you guys the best most accurate review that I can without bringing my own personal thoughts about the strain. I might not like it but its still a good smoke. 👍🏾😎

Another busy week with the vege. I gave it microbes, a HID lamp at 400 watts, sprayed for bugs and also covered the media with plastic wrap to get rid of 3 or 4 gnarts and of course a had another flood with the GoGro water system and I took one plant out of the garden because she is frozen in time. I still don't know why. The trellis is doing good. Lots of work.

Harvest

Day 23 - Had some problems with Calcium because I had not buffered the coco... Made a nutrient flush with a solution of 2ml/gal of CalMag Xtra and 1ml/L of Sensi Coco Bloom A/B diluted at 550 PPM. Now the run-off PPM is higher and the ladies seem recovered. Wish I learned from mistakes. Keep running 🙏🏼 Day 25 - Everything ok. The plant's growing strong and healty. The growth in coco is soo faster than soil!

Flush

My first grow has been a great learning experience, and I couldn’t be happier with the results. From the reliable BioBizz soil and nutrients to the impressive performance of the Spider Farmer SF 1000, everything worked well together. Each component contributed to a successful harvest, and I’m excited to continue experimenting and improving my setup with new gear and techniques. 💚☀️🤙🏼

Entering week 2 of flower! She did A LOT of growing and changing in the first week and I was able to get her canopy laid out nicely in the 4X4! This week is a continuation of that. Slowing tying down branches as not to stress her out. She came down with some broad mites last week ( I can only assume despite all precautions, I brought them home from work, as we had a problem with them in our veg room a couple weeks back) Steady, heavy Nuke Em applications is showing improvement! 3/28 Update: We seem to have won against the bugs! I will continue preventative sprays for a week or so just to be sure they are gone, but I think we are in the clear. I believe I have successfully managed her canopy as well. We are two weeks into the stretch and she has plenty of room to go up now (which was my main concern with her)! I actually brought her down from 43in in the last week of veg to 40 inches this morning through dropping a net and slowly tying and spreading branches! 😁

Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.

I underestimated there food needs but am feeding more now, its also possible that my lights are too close as its the first time using led lights 🤔? The plants are mainly all short apart from a danceworld and a kmi-S1 that seems taller than they normally are (there are 3 going two are short and one is twice there height) onto week 5 Happy New year 😎

Hey Guys, so I have ran into some difficulties regarding our power supplier. Due to the current situation we are facing in South Africa the power company "Eskom" does not have ample supply to provide constant electricity to our country anymore. This is very sad. So they implement a system called "loadshedding" where the cut off power supply in certain suburbs at certain times. This has got me in a complete and utter flat spin as I'm not always at home when this happens. The past 2 weeks have been immensely rough as we we're scheduled for outages 3 times a day for 2,5 hour intervals. Between 02:00AM - 06:30 my tent's power went off (depending on scheduled time). This has in fact caused some VPD problems ( I tried getting up every night, but I still have to get enough sleep for work ). As you can imagine, it sucks BIG TIME. I've done my best to keep at par & doctored where I could. *Decreased Light Intensity (600W) *Decreased Wind Velocity on canopy Almost approaching the start of week 3. Feeding schedule from 3 day interval - 2 day interval ( 2L per feed ) Selective defoliation to get light on lower tops. Used some garden wire to support 2 main colas which we're too high. Note: Pest/Mould check done. Foliar sprayed with H2O2 (hydrogen peroxide) @ coolest part of day - Next day applied high alkalinity ph'd water to kill mildew spores - Fan heater running from 03:30AM - 06:00AM, pulsing/regulating temp at 19-21°C [ until light comes on ] Grow Logging Light Distance From Canopy = 65cm Substrate Temp = 16 C Substrate PH = 6.0 Normal - Moist Level 79cm = Scrog Net Height 95cm = Tree Height PPFD = 20.1 C = Tent 45% RH

It’s the last week of flowering, and I’ve moved the plant into 48 hours of darkness to help boost trichome production before harvest. ✨ The plant has developed an incredibly deep purple color and is covered with trichomes—so much so that it sparkles under any light. The scent is amazing, filling the room with a sweet, candy-like fragrance with a touch of diesel. 🍬 When I trimmed a few leaves to prep for harvest, my scissors actually turned purple from the resin! That’s a first for me and shows just how rich and sticky the trichomes are on this plant. 😮✂️💜 I’m so excited to see how it looks and smells once it’s fully dried. This grow has been unforgettable! 😁🌿✨

Week 2 using Dutch pro grow A and B Dutch pro root solution Calmag , multi total