Granite haze
Plants are still stretching even through lollipop-ping and defoliating. I’m pushing the EC @ 2.2 and going to raise it to 2.4-2.5 in near future when adding PK 13/14. That smell of weed plant is growing but no actual hint of flavor yet. I was lucky enough to get strong vegetation growth during veg hoping for a super fruitful harvest. I’m almost certain I’ll be doing 10-12 weeks with these ladies.
Christmas start date autos
Finishing up week 1 all of them but one have made it above soul except lot o bear by fox genetics .. germinated fine but just a late bloomer .. water with very little water not nutrients at all yet
Panama Red - 2/22/26
Her smell is so sweet… the weather is really taking a toll on her. So far she is resistant.
"1in4x4" C#13
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. Grand Cru Genetics is a cannabis seed bank that emerged in 2018 from a group of breeders in Madrid to provide a satisfactory experience to all cannabis users. "If we do things, we do them well. Due to our experience in the sector and our taste for excellence, we know high quality and we seek it in everything we propose and do." "We have a “cultivate without giving up” philosophy that we apply to everything we do. We do not give up, we are friends of change, and we adapt as necessary in a still restricted sector." "We speak relaxed because we know how to relax. We are not intense or preachy; we accept everyone as they are, and we understand that farming is not for everyone. But for those who do, we are here to accompany you. We like to do it and tell it. We are experts in the field because we are the first to do it. We speak from experience and connect with others because we share the passion for cultivation." "Cannabis has the ability to show us a world of possibilities. When you cultivate and live its growth process, you enjoy a path full of emotions and not just the final destination. At Grand Cru we find beauty in small things. We are attentive, observant, detail-oriented and aware of everyday things, and we savor them without rushing." In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. I think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, the RH will begin to drop slowly to the desired level I set, and the extraction turns off when it reaches the desired RH. The plant, as it performs cellular respiration, will always release more water into the air; therefore, the RH% of the tent overnight will increase, as long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential, which will work wonders with mass flow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
MaxGrow No.1 - Denial and Error
First time grower, criticism will be well recieved😀 Two plant ebb and flow setup in a 3x3 as a test run Top feeding until I can afford the rest of my setup🙄 Started seed in water balanced to 6.0 Sat. Feb. 29th Tap roots within 12 hours, directly into pre soaked rockwool cubes. Broke the surface march 3rd. Began 1/4 strength micro, grow, bloom and stress relief Using very hard water for the next couple days, roughly 450 PM out of the tap. Ro system to be installed march 6th Ro system now installed. Start of week 1 will be Saturday the 7th of March. Day 2: Turned the light down to roughly 50%, instead of raising it, due to the fear of light burn. Will look into it soon. Plants seem to have recovered after I decreased the light intensity. Fan and filter purchased. Alternating flush and feed cycles 12 hours apart to keep salt sats down. Day 3: Bumped light intensity back up to roughly 75% of the ts1000's capability or 700 "light units" from a cheapy 3way meter. Adding as much co2 as I can through baking soda and dilute phosphoric acid. Day 4: Exhaust fan with climate control installed March 10th Day 5: Girls exploded now that I have my salt build up figured out . Day 6: Light back up to 100% Day 7:little droopy on the one plant, gonna let them dry out a day Setup should be complete for start of week 2.(actually sick right now and having trouble getting supplies) Still need a flood table setup.
Outdoor mix
Slobasian
@Slobasian
Follow
You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break
První kolo
Dnes máme 19.den květu. Pijou jak o život, palice se krásně formujou. Zítra jdu na defo. Peace👽
2 Round Super Skunk Automatic
It wasn't a full week The harvest 26.3. (91day) The last two waterings were only 4 liters of clean water. Here are a few photos and videos from the harvest sorry about the quality, but I'm not Saudek. This is my second grow, and I have to say it was a success. The plant has shown great potential. I'll add more photos after the buds has dried.
Marlene
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D22/V20 - 14/09/23 🛠️ EC 0.8, pH 5.8 🌊 💼 🧠 CO2 Dispenser is working good, it should deliver some CO2 trough the pipe 🚀 ________________________________ 📅 D23/V21 - 15/09/23 🛠️ 🌊 💼 Added some workers to bend her down 🧠 🚀 ________________________________ 📅 D24/V22 - 16/09/23 🛠️ EC raised up to 1.2, pH trend is down 🌊 💼 🧠 I'm going to change the water in the next days 🚀 ________________________________ 📅 D25/V23 - 17/09/23 🛠️ 🌊 💼 New workers at work to let her stay down and down 💼 💼 💼 🧠 Now Capitan America and his bike is bending the main bud and the CO2 is provided by NASA 😋 🚀 ________________________________ 📅 D26/V24 - 18/09/23 🛠️ EC is 0.9 and pH is 6 🌊 💼 Added LST with men at work and made some defolation 🧠 🚀 ________________________________ 📅 D27/V25 - 19/09/23 🛠️ EC 0.9 pH 6.2 🌊 💼 LST and new bending 🧠 🚀 ________________________________ 📅 D28/V26 - 20/09/23 🛠️ 🌊 RES Changed 💦💦💦 💼 Added very little bit of silica powder to the water 🧠 I let the plant absorb it along the night and changed the water again in the morning. It's the first time I add a silica to my grows, waiting to see what is going to happen 😉 🚀
NORTHERN LIGHTS AUTO
7 Feb: Watered with a tiny bit of pH-Down, also 0.5ml Acti-Vera + 0.5ml Bio-Heaven. I plan to feed her 2L of this mixture (total of 1+1ml nutrients) for the remainder of this week. I will feed more if I have given all feed and the soil is still dry, otherwise no. I just now calculated that it would mean around 285ml of water per day for 7 days in a row, I think that is a bit too much. 8 Feb: I asked a grow question regarding if I should trim (defoliate) my flower. Thanks to everyone who took time to answer! In conclusion I will not defoliate my flower. 9 Feb: Watered 10 Feb: Today I started using nutrients and I deliberately decided to use the minimum amount possible. I will then see how my plant reacts and either continue with nutrients and slowly increase to "correct" dosages, or switch back to plain water for a little while longer. Also, if you look at the text above after "7 Feb", you see that I used nutrients there as well. However I used tiny, tiny dosages and I also shared the water with my other plant: https://growdiaries.com/diaries/133066-grow-journal-by-depplover49. The feed ran out in just 3-4 days and the plants seem to like it so that's why I had to refill my watering can today. 11 Feb (Day 29): Today was my best performance yet when it comes to mixing nutrients. I measured the pH-levels of the water, added one nutrient, checked the pH-levels again, then repeated until I was done. I also used two different meters since I believe they're both not really a 100% working. I am thinking about investing in a better one, these two were like $15 each and I heard that they can break after a while. Anyways, I checked the soil using both meters and the green one show 6.9 and the red one 6.9-7.0. I'm quite sure it's at 6.9 and my feeding mixture is about 6.5. I am hoping to be able to report a lowered pH-level in a few days (if that's how it works hehe). 12 Feb (Day 30): She is getting wider and bigger, her leaves are erect, she responds very well to nutrients and pH is 6.8-6.9. The green pH-meter is saying 6.8! 13 Feb: Damn she grew 7cm last night, a bit more than 2 inches.
New money 💰  black amber x eye candy
Really Babied these girls and shows the capability of some strains under optimal conditions. Especially throughout flower. Progress is becoming very noticeable. What a great experience making rosin!
🏆 [DWC] Strawberry banana auto
Philhsy
@Philhsy
Follow
My biggest harvest yet, 385g dry oh my god. Never thought hydro could yield sp much so fast. And fastbuds genetics helping me achieve that. The strain is so potent we smoked a joint 4 people and had to put it out bwcause everyone got so stoned. Wonderful. But curing now so im looking forward to those terpz and maybe a little else you never know what surprises beholds. Hsy out!
Lemon cherry cookies
Day 22 Took off lower three nodes of side branches on each main branch. Removed 4 leaves
Wedding Cake Auto
Dunk_Junk
@Dunk_Junk
Follow
Wow she's looking lovely this week. Marching through her flowering phase. I'm getting excited about her next few weeks!! 😍
shorts_status_processing
1st Auto - Cheese
Starting week 3 today, with a challenge ahead with this little bad girl! It seems to be a lack of Nitrogen, and I'm pretty afraid of burning the plant. I'm feeding the plant once each two days, with Seaweed Tonic, 150ml with the suggested dilution from the bottle. Now I have also a bottle of Canna Terra Vega, with NPKS 3-0-3-0. Is it a good idea to start feeding the plant, with also this nutrient? The soil is a mixture of 80% organic soil + 20% of coco coir. Could be a lack of nutrients from the soil? What is the best agenda to follow with nutrients? (: Cheers!! UPDATE (17/02 - Day 17): based on the suggestions made by many members, I've tried to gather the best of all and decided to make some moves in an effort to save this plant, and to avoid the same situation to the other 2 plants: #1 - Lifted the LED panel to double of the height, so the distance to the plants went from 50cm to 100cm #2 - This change with the distance from LED panel helped to low down the highest temperature achieved during the day from 27.5°C to 24°C #3 - Since day 15, the plants haven't been watered, in a move to try to dry a little bit the soil, once I was watering every day with something close to 250ml a day. Now I'll return with water in a few days, while I wait for some signals from the plants that they are needing water #4 - Pushed forward the idea to start feeding them this week, and maybe I give just a little bit of seaweed solution to root development when I come back with watering. Hope it works fine!
Cinderella Auto #1
Hiiigh friends 🙌 Welcome to week 5. 😍 The pretty ones have gained a lot of mass and have grown big and strong. This means they are continuing to train diligently.. 😊 See you next week. 👋 Arturo for KannaKullektiv 🙏
Gelato#33 in 4x4
week two flower everything looks healthy :D today i defoliated them i watered them with 1.5l every 48h the light i use was set to 80% and it hangs 80cm away from the tops
Kings Juice
Lazuli
@Lazuli
Follow
Im not a soil guy but im happy this plant got such huge rockhard buds i didnt expect result like this in just soil, i fed her maybe 4 times during flower only.
Cookie Casket in SecretBox
Hsihs
@Hsihs
Follow
Цикл занял 16 недель и 2 дня или 114 дней от семени в рюмку. из них 9 недель и 2 дня цвет все было просто. пробовал, очень сильная.
GuavaAuto(RF3)
Chubbs
@Chubbs
Follow
Weekly up date on these gorgeous ladies. They are stacked and swelling amazing going through the flower stage. I really couldn't be happier with how these have grown as it's an easy one not being to temperamental. I've kept the ppm/ec around the same between 900-1100ppms. Still feeding 16oz daily and all in all Happy Growing.