Todo más ordenado , falta poquito, verdaderamente rápida esta genética y un hermoso color rojo se puede ver en una de ellas , las otras del fondo también son rojas pero un poco más claro, en fin , algún día repetiré esta genética 🌹

Veg14, transplante y riego.

SETUP: SPIDERFARMER 2XSF2000 BIOBIZZ LIGHT MIX 7L AirPots I Love you Mary Jane!! Not to much Text look Video! Green Greetings!

Week 3 (06/02 - 12/02) During this week I will try to apply the LST to the plants. On the inkbird, I will switch the fan with the extractor. The heating/cooling system parameters will be: 23.5°C (+0.5°/-3°C). The extractor will be on 5 hours in the morning, 5 hours in the afternoon. I will continue to feed the plants with tap water and only 2ml/l of Bio-grow. I will increase the light up to 75% with a distance of 30cm from the top of the plants. 06/02 D15: - 07/02 D16: first LST, bent down the pants directly to the soil. Watered the plants with tap water (0,5l each) 08/02 D17: I increased the inkbird cooling parameter to +1°C because the temperature inside the tent starts to increase faster. The plants seem to have responded well to first training 09/02 D18: watering day. I added 2ml of Bio-grow to 1.5l of tap water. 10/02 D19: - 11/02 D20: today I applied a second LST bending because the plants started to grow strait. After the training I sprayed the pants with tap water. 12/02 D21: watering day, I added 3ml of Bio-grow to 1.5l of tap water

All have taken well to nutrients, will probably keep at same ratio throughout flowering. Will also be using 1ml/l of b52 from flower week 3 and then ripen before flush. A few seem to be fattening up before the others but all are doing OK. Will update every 1-2days.

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.

Still no sign of flowering. Transplanted Novarine plant 2 into a 50-liters container. The spot is under a big shorea plant. Shorea is a South East Asian medicinal tree. This is minimum light spot in my yard. Hope she would flower. I choose plant 2 because I think plant 1 will stretch even further. Plant 1 was also moved to a shaded spot under an tree jasmin. This Millingtonia, Indian cork tree. I have sweet flowers all year round. People told me that dried tree jasmine flower mixed well with weed and is good for people with ashma and sinus. Kind of useless since why would asthmatic people even smoke? Plant 3 is my back up until I come up with a way to put her into flowers. Clone are doing nicely. And I am growing 3 clones from plant 1 and only one clone from plant 2. I’ll be donating the rest to friends with weight and blood sugar issues. By year end, I probable keep only one or two clones. One clone from bigger branch is growing just fine without any benefit form lighted grow box. Feeding plants with mid-level dose of cow manure tea and earth worm casting tea to keep leaves healthy. They should have been given a light dose of fertilizer. However, the flowering purslane are also eating and feeding soil microbes. Got my paws on triancontanol and brassinolide. Perhaps these will jolt Novarine THCV into flowering. Triacontanol won't dissolve in neither water nor alcohol. And it is emulsified with polysobate. Mixing of Triacontanol Triacontanol does not dissolve in polysorbate. It is rather emulsified. Means that it need to be melt and there need to be water added. My steps, 1) heated 70 grams of polysorbate in a big heat resistance glass cup. I used a beaker. Mix in 5 grams of triacontanol. And it does not melt. 2) Put in 100 cc of water and put in microwave. After the mix is boiled, triacontanol melt. There is foam. So a bigger cup and a spillage plate would prevent problem with my better half. 3) After heated, the mix is better. Then I added hot water from to make total 250 CC of solution. Then, the mix is clear. 4) Label the dose with pencil. This works better than labeling with ink. I use 5 cc at a time for my entire garden. 250 CC would last me 50 doses. No need to buy so much. This is cheap. Let’s see next week how effective they are.

Maybe one or two week for harvesting

The bottom watering worked for the week I think as away happy with results think I might just bottom water regularly and feed the tea from top every other changing 2/8 I did a good clean up and some pining Monday 2/10 I will filp to flower I also added power bloom today 2/8

Gran Turismo is really looking sharp! The leaves are a beautiful, dark green and it's growing so fast. I think it might be my favorite seedling – it's got this really strong stem, and it stands tall. I can tell it's gonna be a healthy plant when it grows up.

This week I've been pulling the top fan leaves to stop the plant growing taller and to allow the side branches to catch up. I also started feeding them. I will probably repot and switch to flower next week now they've all outgrown their mutations.

Grand Daddy Purple auto is finishing up. She was switched to ph water yesterday. She has not color morphed for me. Still looks good, and smells good. Thank you again Medic Grow, and ILGM. 🤜🏻🤛🏻🌱❄️ Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Last weeeeek for the Zillions! 💵💵💵💵 Heat is horrendous atm so everything is on low Going to be giving a 2 week flush with plain water then flawless finish. Update again in 3 weeks! Stay tuned

Aug 5: first night using far red light. Very trippy.

Was good

- So far 2 males have been found. Pot #2 &7. - i see pistols showing sex maybe flowering next. - LST 1-6 - 7-11 received no LST for testing purposes. - Increases PPM to 400 - Right side receiving triple 20 look more bigger so far. Haven’t been able to upload videos I’ll try on my pc.

CO2 began yesterday. All were transplanted into forever homes by Air Bottom Bags September 27th. Began 20/4 light schedule 10/1/2021. 2am-6am lights out.

Yo la fam attention les yeux 🔥🔥🔥🌱🔥

Mainlining is progressing nicely. The main stem was topped at the 3rd node, and each main branch was topped again at the 3rd node to build a clean and symmetrical manifold. I always wait until the branches have 5 nodes before topping, to make sure the plant is strong enough to handle the stress. This week I performed a selective defoliation and some light LST, only to guide the branches and keep everything level. I’m still deciding between 8 or 12 main colas, depending on how the plant continues to respond. In the video you can clearly see the before and after of defoliation and training 🌱💪

Rückblickend betrachtet hätte ich sie auch noch ein paar Tage länger stehen lassen können. Aber da ich kein Sea of Green habe werden nie alle Buds gleich reif sein.