Likes
Comments
Share
Pruned on Day 10 of flower and the smell is already coming trough Everything good for now the ladies looking Amazing Will do da Heavy defoliation between Day 21 and 25 Ec 2.8-3.0
Likes
24
Share
Las 4 nenas del scrog iniciaron con el ciclo 12/12 el día 05/11/2021: están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -blom -grow -b52 -rhino skin -big bue -bud ignitor -bud candy -sensi cal mag xtra Las 2 nenas en macetas de 30LT 18/6: por el momento están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -grow -blom -b52
Likes
24
Share
Rock hard buds Miicrobialmass for the win and the new led is killer. The knobs like knots grow out of the sides of the buds are something to look at wow !!! Monkey berries is in flushing mode , slurricane won’t be far behind in the next week or 2 I’ll flush
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Processing
Likes
1
Share
Día 1 clones ya enraizados listos para transplante a recipiente de mayor tamaño 0.5L aprox. Transplante realizado con la incorporación de micorrizas de la marca micoroot además de rizothonic de canna, esperando el enraizamiento completo del recipiente para transplantar a maceta de 20l. Día 3 se transplanto desde los vasos a la maceta definitiva de 20L para ambos clones de tangie y se instaló malla scrog Kanovi.
Likes
574
Share
@TOTEM
Follow
Hello everybody! This week will be the hardest one. I’ll have to work a lot inside the room, and even on GD to document all the changes. Last week I topped for the last time (in reality this happened the first day of this week), and finally stopped with high stress training. From now on, our attention will fall totally on ScrOG. Day 43: Topped the 4 colas at the extremities. Red blood came out from them (see the photos). Amazing! Sorry for the bad quality, but I got just the phone with me when I did the job. When I took the second photo (a few hours later), the plant had already sucked up all the lymph. You can still see the red blood by the way. Day 44: Set the timer to start with 12/12 from midnight of day 45. Day 45: SO MANY THINGS HAPPENED TODAY. Flowering started, baby! 🤩 Today, in the evening, I worked for about 4 hours to prepare the ScrOG environment. - Improved the LST before placing the grid. - Took some photos. - Removed the humidifier. - Since my LED panel has half of the blue lights broken (this happened three weeks ago), resulting in 100W less of total potency, I added 3 new lights pointing where the panel is broken (2x 36W led bulbs and 1x 30W COB led light). I uploaded a photo and a video to better understand what I’m talking about. I even tried changing the broken LED driver, but it didn’t work, so now I’ll have to wait until the end of this cycle to send it to maintenance. - Put 20gr of BatMagno (which is bat guano), 10gr of “Farina di Neem” (Neem Flour), and 50gr of Alghe, all of them over the soil. I’ll write something about these fertilizers at the end of the comment. - 4.5L of tap water (corrected to PH6.5), which gave zero runoff. Haha, she’s drinking like a camel. - Placed the grid. - Took a few photos. - Little defoliation. - Took all the other photos. - There we go! I preferred not to add the bloom fertilizer now because I’m a little worried about overfertilizing this baby. During veg, she showed me she doesn’t like nutrients, so I’m just listening to her requests. I’ll add the bloom one as soon as she seems hungry again. By the way she’s just 20cm tall (I’m so proud of this result) and the grid is located a few centimeters above her. Let’s see if I switched to 12/12 at the right time: I heard this strain usually stretches for about 6 weeks!!! 😱😱 Let’s talk about the ferts I placed on the surface of the soil. - BatGuano: it’s a mixture of organic fertilizers of natural origin and suitable to produce a high amount of organic nitrogen and phosphorus that can be assimilated at 100%. It’s a natural slow-release fertilizer for flowering: the raw materials used (guano, dried borlanda with ammonium salts, kieserite of natural origin, flagpole, meat meal, bone meal and dried poultry) are the result of a careful selection which ensures a low salinity and a gradual transfer of the elements. The phosphorus content in BatMagno (being organic) does not undergo insolubilization. - Alghe: they are a portentose substrate activator made of a mixture of algae of the species Ascophillum, Fucales and Laminariales, obtained through a process of dehydration and grinding without the use of any chemical substance. They can be used during the preparation of the soil, and increase and strengthen the formation of the root system, mobilize the nutrients in the soil, reinvigorate the plants, protecting them from adverse weather conditions, help plants to overcome stress conditions and improve the quantity and quality of production. All of this is possible thanks to the presence of betaine, cytokinins, vitamins, auxins and alginates polysaccharides. - Farina di Neem (Neem Flour): it’s a vegetable product based on Neem seeds, obtained from the extraction of Neem Oil through a process of cold-squizzing out, which increases crops, improving both growth and flowering, as well as strengthening the roots of the plants. The Neem Flour is mixed with nitrogen fertilizers, that slow down the conversion and leaching of nitrogen. Repeated interventions improve the endogenous resistance of plants to pathogens, creating an unsuitable environment for the development of insects and cryptogams. Due to the presence of important trace elements for plant life, it prevents imbalances and nutritional disorders. It also protects plants from Nematodes, ants, insects and soil larvae. Let’s say Alghe is the most smelly product. My room now smells like seaweed! I need to figure out how to give her water now that the grid is on. I think I’ll plug a 2m pipe at the end of my watering can. That’s the most easy and cheap way to fix this problem. I just need to find the right size of the pipe. I’ll show you my solution next week.
Processing
Likes
11
Share
@chimera
Follow
Good string week of growth the hybrid light system certainly helps under Veg training the branches out along the wire ready to take these girls to 12/12.
Likes
26
Share
@Growin_it
Follow
Defoliation on lower branches to improve air flow and future larf. Going into 12/12 for flowering, next week.
Likes
9
Share
@Justrite
Follow
Peyote cookies Week 6 Plants took a hit with auto pot trays getting little unclean , washed out trays and flushed plant with cal mag water and then left to dry for a day Feeding at 1.8 and 5.8 High humidity outside , dehumidifier capturing lots of water . Flower sites are starting to widen out and climb , massive resin production , smells awesome . Temp lowered , purple starting to show on flower Relocated dehumidifier and times changed to run intermittently during light cycle to keep heat down and runs in the off cycle to keep heat up and humidity down ( obviously lol ) Relocated Air intake vents Raised fan and also place some bamboo sticks behind in screw holes to have the fan even spaced away from tent wall making fan perform even better at lower speeds and really pull the air from behind n below the fan Intake fan speed reduced as it was also pulling in too much cold air too quickly and not diluting with warm air enough , adjustments made and leafs are reaching for the lights now Lowered second net to move the taller branches outwards to get more light down to lower sites There’s a video at the end of pictures for yall x
Likes
142
Share
Hi everyone 🤗 This week it looked more and more astonishing after opening the box a wonderful sweet smell wafts through the room 👍. A few days ago the Blue Cheese Phenotype 1 was harvested and placed in the dark room :-). This week both Kosher Tangie Kush phenotypes will be harvested 👍. Next week the Blue Cheese phenotypes 1 and 2 will be harvested ;-) everyone else needs a while 😀. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱👍
Likes
18
Share
@Northfork
Follow
10-5-25 last week for the dos si dos 33 she is looking heavy and ripe going to pull her in the next couple of days. The rest of the girls still have a a week or two left.next week we will have a harvest.
Likes
3
Share
@Comfrey
Follow
This week I continued with LST and while I bend down my Kush on day 39, the stem bent over. I could fix it and within some days the plant repaired the injury quite well. At the end of the week I was surprised how good she handled this big stress. This is not the most beautiful of my plants but I love her like the other ones. 😍
Likes
59
Share
(11/11-11/17) ***All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios of each feed will be listed when I feed. Veg mix recipe is on week 2. Bloom Mix recipe will be noted in this top message of the week that I make it.*** Week 1 Notes & Observations: Both plants are coming along pretty good. No concerns rolling into week 2, I will be starting nute supplements in the diet this week but plan to add them slowly to the regular routine. Day 18, WOW what a difference the feed made with Plant 1!? She was a good inch behind plant 2 at the start of the week and today she 'looked' bigger, so I measured, 2 days after the deep nute feed, and now she's an inch taller than plant 2.😮 VPD this week will reduce the humidity in the tent to about 70-75% and temps will be monitored for 75- 78F daytime and 68-70F overnight. Lights should adjusted to provide 300 max, but will try to hold the 280 setting as long as I can this week. Meaning no increase over last week other than growth. Feed & Monitor: Day 16 (last feed was day 11) Tested and Calibrated my ph pens. Starting weight from each pot was 18 lbs and 8 oz, P1 weighed 15lbs 9oz and P2 was 15lbs 15oz before feed. Each plant got 1 gallon of purified water with 75ppm Veg Mix (recipe above and makes 1 gallon at about 3600 to 4000ppm concentrate to dilute each feed, i.e. I only fed 75ppm above the purified water ppm this feed) The ph on this feed was balanced to 5.75ph to combat the higher runoff ph from the last feed. P1 weighed 21lbs even and P2 weighed 21lbs 5oz after feed. I got about 5 cups of runoff on P1 and 6 cups on P2. Top soil tested at: P1 (6.37, 6.37, 6.37, 6.32) avg 6.357 and P2 (6.55, 6.61, 6.52, 6.42) avg 6.525 - Runoff for P1 ph was 6.29 with 1530ppm and P2 was 6.29 with 1580ppm. Hope everyone enjoys the daily progressions of overhead and side profile (Organized Chaos). I will try to add a video and black back or cover pics by end of week every week.
Likes
62
Share
Hey guys welcome to week 6 and day 33 🙌🏼 The girls are getting really big now and i‘m tucking the new groth every day. It‘s pretty dificult to get good light penetration through to the lower branches but I will try to wait until day 21 of flower to cut anything off. I don’t want to stress them. For now I tug the big fan leaves down and keep the humidity as low as i can. They do transpire alot. Well, thats it for the start :) nothing else to report..
Likes
408
Share
@yan402
Follow
🌈💐🍬🌈💐🍬🌈💐🍬🌈💐🍬🌈 Hi and welcome to another grow again from Kannabia this time it's a Feminized photoperiod, Candy Cream Go fast, my plan is to veg and manifold under 24hr light until my sweet "little"Runtz Auto is done. 🌈💐🍬🌈💐🍬🌈💐🍬🌈💐🍬🌈 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events"&thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 29.11.24(GW1) Prepared the substrate by washing out the old nutrients and planted the seed. 03.12.24(GW1) The little one germinated 🎉🎉🎉 04.12.24(VW1) Decided to switch to Veg out of practical reasons so I can update both diaries in one go. 10.12.24(VW1) increased TriPartMicro to 20ml and GreenBuzzBloom to 20ml. 18.12.24(VW3) Started the manifold process topped trimmed and defoliated filled the pot up to the nodes I kept for extra support and to keep things dry(📸) 22.12.24(VW3) Topped her one more time (📸) 01.01.25(VW5) broke a branch the other day, she seems unfazed. 04.01.25(VW5) increase TriPartMicro to 40ml and observe how she reacts after her next feed. 06.01.25(VW5)Did the last topping for 12 tops since one branch is "missing" 15.01.25(VW6) Had to dry her out 10-15.01.25 because of fungus gnats so she didn't grow as much as I would like but it's back to normal now and as soon as she gets some height I can place sticky traps to control the mofos. 17.01.25(VW7) Pruned the bottom nodes so I can put sticky traps and water and feed without getting future bud sites wet and moldy(took pics), increased TriPartMicro to 60ml from 40ml. 23.01.25(VW8) Seems to have lost more than a week of growth unfortunately, a whole week with out water was a bit too much apparently just to control those mofos (fungus gnats) I’m hoping this is the last week of 24 hour light schedule. 26.01.25(VW8) Increase GreenBuzzBloom to 30ml and TriPartMicro to 70ml WIP 💭❗💭 ❗💭❗💭❗💭❗💭❗💭 🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 🌼Day to day tasks & actions🌼 🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 22.01.25(VW7) fed with (*1) 5l 23.01.25(VW8) no water no feed. 24.01.25(VW8) fed with (*1) 5l 25.01.25(VW8) fed with (*1) 5l 26.01.25(VW8) fed with (*1) 5l 27.01.25(VW8) fed with (*1) 5l 28.01.25(VW8) fed with (*1) 5l 29.01.25(VW8) fed with (*1) 5l 🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼🐝🌼 🍶💦🍶💦🍶💦🍶💦🍶 💦Nutrients in 30l(*1) 💦 🍶💦🍶💦🍶💦🍶💦🍶💦🍶💦🍶 💦TriPartMicro:15ml*20ml*40ml*60ml*70ml 🍶TriPartBloom: 0ml 💦 Fermented🌿juice:0ml 🍶GreenBuzzBloom: 15ml*20ml*30ml 💦Cal-Mag: 60ml 🍶buxXtrade citric acid Ph- 💦🍶💦🍶💦🍶💦🍶💦🍶💦🍶💦 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️➡️2xMarsHydroSP3000 ⚙️➡️MarsHydro150mmVentilatorACF ✂️➡️Trotec (big) dehumidifier ⚙️➡️Small no name dehumidifier ✂️➡️Kebab stainless skewers 3 (LST) ⚙️➡️wire+roast beefskewers(LST) ✂️➡️trimming scissors.(HST) ⚙️➡️Waterproof vacuum cleaner for ✂️spills. ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭 CandyCreamGoFastKANNABIA 🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬 Species:70%Indica+- 30%Sativa+- Indica Cream x Auto Indica Cream Flowering period: Short Yield:High Scent:Low Seed:Feminized Effect:Relaxing THC:20 % Features:For beginners, Good for extractions, Moisture resistant,Pest resistant Flavor:Sweet Complete cycle:46-49 days Indoor Average height:180cm Yield:550 gr/m2 Outdoor Average height:180cm Yield:600 gr/plant 🌈🍭🍦🍬🌈🍭🍦🍬🌈🍭🍦🍬🌈
Likes
41
Share
This lady has bushed out really well. She is still the same height as the rest but that's all about to change as she has now been put into flower. A long flower period ahead but I'm hoping that the claims the light manufacturers have made about the deep and far reds quickening harvest are true 🤞
Processing
Likes
11
Share
Día 39, sigo con el problema de fertilización, aún no trabajo en ello. Puse un sistema de generación de CO2 para apoyar la floración.
Likes
2
Share
Hello Growdiaries 🌱, sorry for the lack of updates since the switch to flower – work kept me super stressed and I just couldn’t find the time. The ladies (2× Frosted Guava & 1× White Raspberry Truffle) are now in week 8 of flower and doing well overall. I’ll probably harvest sometime next week. Since ~5 days I’ve stopped feeding nutrients, just giving plain water. Tomorrow will be the last watering, and then I plan to turn off the lights next Tuesday and harvest on Wednesday/Thursday. Both Frosted Guavas are looking beautiful – one of them even showing a bit of purple. The plant on the right struggled a bit during flower, but the other one is stacking some gorgeous rock-hard buds. The White Raspberry Truffle is also looking very nice and frosty. I’m planning to run both strains again for my next grow. Once I harvest there will be another update, and after drying & curing I’ll post a final update with a smoke report. Happy growing everyone ✌️