Likes
Comments
Share
@Canadian
Follow
This plant has been a Beast has been going very healthy and very strong I have been defoliation heavily to ensure maximum light penetration into the canopy in order to make them ready for flowering cycle . Currently running on 12/12 cycle. I will continue to update thank you for reading have a happy grow
Likes
3
Share
Just put them in the towel today. Expecting them to pop within 24 hrs and ready to plant in 3 days so spending the time thinking up names for the 2 girls They've both popped bang on the estimate. One even has a 3mm long taproot already. My coir has been reclaimed from 2 previous grows and the perlite has degraded so rather than wash up stones from the garden I've thrown in a few handfuls of lego bricks. They're non reactive to anything I'm going to put in there so should work just fine. Plus I've got plenty of the shit kicking around. I went back today and nearly shit myself at the progress. 1 had nearly sprouted fully so I got the nutes mixed and stuck them in the coir with an extra drink and a bottle canopy. Week 1 will begin with the first ground being broken
Likes
52
Share
Ne Obliviscaris. Humidity Day 40-45%, Night 60-65% Internodes are very close together. was hitting 450umol at seedling level making it absorb more than it can use, reduced to 280-300umol @18 hours as expected vertical growth increased. During the 18 hours of daylight the first 9 is highly saturated in blue, 5000 kelvin, the 9 hours thereafter are closer to 3000 kelvin. Last 9 hours dosed 280nm. Height is too far to cause damage. UVB light is not detected by plants in the same way other wavelength/colours are. UV cannot be measured using umol as it doesn't drive photosynthesis. The plant has tiny little sensors that get set off to even little amounts, dimer salt bridges, the UV decays these salt bridges, which initiate response. You don't need large/long exposure doses for the plant to recognize UV is present. What's an enzyme? Think of it like a multiplier, you can add an enzyme to any particular biological process to vastly increase its proficiency at a particular process. Cannabis plants take blue/violet light and use it to create an enzyme called "photolayse". This allows the plant to repair UV damage done to the plant using a process called excision repair, this repairs the damage at a much much faster rate than it could by itself. Repairing 100% damage. The key is the plant needs time to build a reserve of the repair enzymes before using it. This is replicated in nature as, by midday UV levels peak, the generally cooler mornings allow lifetime to build up. The problem I encountered was dosing with 280nm lights on or 1 hour after the lights were on. Photomorphogenesis, the plant plans for the future of its growth, if the wavelength is not present during growth then how can it plan accordingly? The very presence of UV changes parameters with which the plant will grow, light itself dictates the growth pattern of the plant. Not only that it can dramatically alter the regular terpene profile of a strain in unexpected ways. Gran daddy purple grown using 280nm can triple already high terpene linalool. Linalool is terpene best known for lavender, largely responsible for its beautiful smell. Trouble sleeping you say? Having tried Durban poison from a dispensary and reading about its levels of tetrahydrocannabivarin. I've always wanted to taste the difference UV would make to such an already stand-out strain such as Durban.
Likes
52
Share
@MeaCulpa
Follow
I counted the days again and came to the conclusion that I have 70 days full and harvested tonight. Enough brown and amber trichomes are also present. I'm excited to see how they taste and pop. They definitely look and smell very good. What's really funny: From the 2-3 week onwards, I turned both TS1000s up to 100% for 18 hours a day. I just wanted to find out my cap. I used around 100kW/h and €40 less in electricity costs. Compared to my last grow with Feminized and 10 weeks of flowering + Veggy. I wouldn't have expected that. Well... let it dry in peace first. Another project is already underway. Have a nice weekend everyone.
Likes
1
Share
@GorkedOut
Follow
I believe these seeds were supposed to be auto's but nevertheless, I chopped them on day 121. A total dry weight of 234 grams. As far as the smoke goes, I enjoy it and it's what I would expect.
Likes
21
Share
@gr3g4l
Follow
Nueva poda de apicales y una de silicio. Con 26 dias Harto de los plomos me deshice de ellos y así seguiran creciendo , tal cual quedaron. No pretendo hacerles mucho más, más adelante igual doblamos alguna rama para guiarla y quitar algun chupóptero. A los 26 dias también se subió la potencia del lumatek al 75%. unos 220 W. áprox. y así pasaran hasta que se cambie el fotoperiodo.
Likes
15
Share
@AllieO
Follow
2/2: not much to report. Slow going, but going 2/5 NL: Still have a few weeks to go, but buds are fattening up. Watered with pH balance water as she was given nutrients on last watering. I didn't have high hopes for this plant. Still unsure of the density of the buds.
Likes
3
Share
more and more trichomes and the buds are getting bigger. its getting smelly.
Likes
17
Share
Day 33 and she's looking great, getting bushy. Day 31 and 8" tall. she's sprouted a little overnight. fed with biogrow today app 400ml
Processing
Likes
2
Share
6th week of flowering I realized this is the best auto plant ever Very powerful and fruity smell Looks like its not auto but it is Let's see what do we have on 8th week
Likes
22
Share
Seed to harvest day 67 Sticky buds Fruity smell Good strees performance Total Used power 400w
Likes
16
Share
@Ale1000
Follow
Ya están en su última semana , una planta que nunca dió problemas , fácil de cultivar y acepto con mucho éxito el corte apical y el entrenamiento lst .
Likes
15
Share
@Uwish
Follow
we continue the run with the slowing down of the stretch and the beginning of the beautiful flowers. This week my EC indicated me some things... It was at 1.8 and went up to 1.9, so I added water to lower the ec to 1.6. When my ec goes back up it tells me that I have enough nutrients in my solution. Now, the ph is back to 1.7, I will add more water to bring it down to 1.5. We can observe on some leaf tips a beginning of over-fattening, this is what I'm talking about above, I'll let you know next week if I lower the ec or if I keep 1.5. I did one last defoliation and it was needed! If you look at my vitals, it's not crazy, 70% humidity at this time of the year can become problematic, so I'm going to take the dehumidifier out and set myself at 55%.
Likes
6
Share
@Godsgrace
Follow
👽We are continuing. I will not rush to transfer to flowering, I want to try to make the maximum circle (if there is enough space in the box). 💪🏻 I continue to give power root, pure zym, sugar royal. I will water more often, every 2 days. 🦈I will give Fish force 1 times a week. 😤Oops, we had a pickle on the 38th day. I neglected to constantly measure the PPM level, and he gave me 1100. I spilled 400ppm (150 calmag + A + B) on the entire volume of the pot. And immediately after that I gave him 750, as usual, with all additives except fish.
Likes
141
Share
Update 4/4/2022 (Day 50) These girls are starting to get big! almost 70 CM in height right now. It's been a week since I flipped them to flower. and it's only today I start noticing some small pistols shooting out. Might have to do some more defoliation it's unbelievable how fast these are growing in this setup with autopots. I purchased 2 Fans before this grow and they both already lost the oscillating function. I will not recommend these fans (GHP PROFAN+ oscillating monkeyfan 25CM 20W) supplier also told me they had much complaints about these fans and they would stop selling them as of now. Update 05/04/2022 (Day 51) Big Cleanup day Last time Lollipopping mostly all the way to the top sites. Update 07/04/2022 (Day 53)) Starting to see some pistols not quit big enough to get a good picture of them. Other great news. I've participated a Mars Hydro contest on Instagram and I was lucky enough to be the winner!! So soon I'll be able to switch my Current TSW2000 for a new FC4800 Bar style light 😎
Likes
5
Share
@Kinghaze
Follow
Week 4 They are looking healthy. But one of the blue zlushi is looking weird, lets see how she develops. I think next week i will top them and begin training.
Likes
4
Share
Hola a todos!! Esta semana prácticamente no he fertilizado, ya que luego de un breve lavado note que los valores de ppm aun seguían siendo alto..(1700...1800), entonces segui regando solo con agua, con bajas ppm 500 ppm aprox. Recien ayer logre bajar las ppm , no asi el ph, del drenaje, me viene dando 7.2, pero a pesar de todos estos inconvenientes, a la planta se la ve engordando los cogollos.En esta semana se estiro 1.5 cms solamente, pero los cogollos están creciendo de buena manera. El lavado lo hice el día 44 con 7 litros de agua con ph 6 y ppm 500, luego de un buen rato de drenaje medi y en ese entonces parecían haberse corregidos, pero al siguiente riego dia 46( lo hice con 2lts de agua) me volvió a dar valores altos. Para no generar un mal ambiente para la planta, la deja descansar 2 días, y ayer (dia48) volvi a regar y al fin las ppm han bajado a 900, el ph aun sigue dando alto, pero como mencione antes la planta demuestra que cualquier inexperto la puede cultivar, porque se aguanta todo ese stress😅😅 . Aun no sé distingue sus sabores, pero sus hojas ya se están cargando de resina..
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
15
Share
The ladies are looking nice very healthy the one that broke came back and sprouted like crazy took 3 cuts off since I didn't want those to reach first time who knows what will happen free 3 cuts