Likes
Comments
Share
Ladies and gentlemen today is the day! Day 64 and she is officially chopped.. now, I will admit that the very bottom buds are not one hundred percent matured, but 90% of the plant is exactly where I want it.. a little bit of amber with at least 75% cloudy .. thank you Zamnesia Seeds for sponsoring this grow, it has been an absolute breeze from beginning to end and she smells and looks like some exotic flower.. Also a good yielding plant as well.I'm expecting over 6 oz of dried flower.. hope everyone is doing well with their ladies.God bless and happy growing ✌️
Processing
Likes
6
Share
Muy buenas! Les he rellenado la maceta con un poco de sustrato, van estirando muy bien. Mañana aplicare el segundo riego con fertilizantes en la etapa de floracion Lleva 15 dias a 12/12 horas
Likes
5
Share
@Hou_Stone
Follow
April 10th, Time to repot! First, the new pot, this will be the final pot for my White Widow, a 50L geotextile pot with a substrate I prepared and amended beforehand. I kept a diary about the reciepe of this substrate! Before transplanting, I added about 75g of BioGrow as a top dressing to provide a good nitrogen boost for the next few weeks. Then I had to select one of my three White Widow plants. I applied a spoonful of TNC Mycorrplus to the slightly damp roots so it would adhere well. I placed it in the center of the pot and watered like 3L with Bioenhanceur, trying to be gentle during this steps Now, fingers crossed for what comes next...🤞 Thanks for stopping by!💪💚
Processing
Likes
88
Share
@No_Clout
Follow
01/08/18 - I fed them all 1 litre each, one of them seems to be praying up but the other two Seem a little bit droopy still. 02/08/18 - #3 is praying like usual and the other two are getting better Day by day I’m going to be giving them another feeding tomorrow, I have seen roots stretching out to the sides of the pots so I might saturate the whole pot. 04/08/18 - horrible sight today looks like rusty cracks in some leaves , not got a clue what this. 05/08/18 - browning has continued since last night and it’s all on the new leafs not the older ones. i fed them without any calmag , so I think it could be a deficiency of some sort (cal/mag).the mad thing is, it’s only two of the girls, one of them is completely fine nice green leaves not yellow marks that turn orange/brown. It definitely has nothing to do with my ph or all three girls would be showing some symptoms seeing as they all get fed with the same soloution.✌️🏻 07/08/18 - everything’s cleared up their was slight nute burn in the process but everything seems a lot better so I decided to start LST. all the new leaves are the colour they should be with no nute burns or calcium deficiency 🙏🏻
Likes
46
Share
Pulling the top fan leaves to allow the side branches to catch up.
Likes
20
Share
Flower Week 1 Day 7 to 13 - 3/25 to 3/31 Simply watching the stretch from this point. Both plants recovered very nicely from Schwazze extreme defoliation and all of the colas/branches are mostly even at top. Feed this week was again an auto pot reservoir feed at 650ppm total before add-ins. I used 325ppm Veg concentrate mix (recipe week 2) and 325ppm Bloom concentrate mix (recipe week 5). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 5.8 where Io plan to maintain it until harvest. Next week nutes will increase in Bloom mix again but also reduce in Veg mix. Feed will be 700ppm before add-ins with 5.8ph before feeding.
Likes
18
Share
@For2itous
Follow
She's about done another week or so and she will be. Super sweet fruit smell like a jam or fruit filling for a dessert 😋 super dense frosty nugs rn can't wait for this one gonna be a tasty one. Happy growing 🌴
Likes
11
Share
Great week. I went back to 24hrs of light to keep the environment steady, because I put a few babies in there. She stretched about 10 inches and has a lot of bud sites. Pretty satisfied with the new nutes all my ladies seem to be soaking it up.
Likes
17
Share
this week ended very nice. I am happy with the growth.
Likes
27
Share
I was on a trip for work for 2 days, I tried my best to take care of everything before I went. They still got damaged cuz of underwatering.. also I’m not quite sure if they are underfertalized because of all the flushing for the right ph I did. They started to develop droopy yellow leaves that are pretty soft to the touch and don’t crunch up at the tips like they first did from nutrient burn. I gave them a top dress today with a mixture of 25% worm castings and 75% all mix, hopefully this will stabilise them. I would really appreciate some help in this case, as I’m not sure if it’s caused by nutrient deficiency or nutrient burn. Also I wanted to do a big defoliation and lollipoping this week, but I feel like I first should solve the nutrient problem, so I don’t start damaging the top growth.
Likes
3
Share
Started off with some training 😍 Shes responding very very well! Was about to top her but I changed my mind so ill see how big she will grow Hoping for a bushy plant 😍
Likes
23
Share
These have been put through hell. With the makeshift tent door really struggled with conditions especially humidity which has been around 68% which is miles to high. Unbelievably no sign of mold and they’re definately frosty and smelling the part. Yield will be well down but so glad I didn’t pull the plug on them.
Likes
Comments
Share
Esta semana, nuestras plantas empiezan a mostrar las primeras flores. Ya tenemos la sala con las cuatro luminarias funcionando al 75% de su potencia y las he separado un poco más, ya que veo que con led, el espacio internodal es muy reducido. Añadimos a la mezcla de fertilizantes CALMAG de BioBizz, que aportará un extra de calcio y magnesio. Regamos cada tres días aproximadamente, una vez con fertilizantes y otra vez con agua. Comenzamos a reducir la humedad relativa en la sala y desconectamos la calefacción en fase nocturna, para que empiecen a pasar un poco de frío.
Likes
12
Share
Processing
Likes
15
Share
@Deli_Weed
Follow
Ya casi por finalizar 😃 estoy muy emocionado por el resultado final, todo pinta bien 👌🏻💯 se puede mejorar aún más pero estoy conforme con el resultado de esta planta 🌱 Esta semana fui bajando la ec poco a poco hasta llegar a pura agua, la semana que viene será de puro flush 🚿 ya para cosechar 🤩
Likes
2
Share
@CalGonJim
Follow
8/10 Monday. 12:05AM FULL RETARD MODE ACTIVATED 8/10 MOnday - looking good needs water will ask Grok: For your Fast Buds autos (RF3s + Mendo Frost) at roughly week 5 in coco, target an incoming EC of about 1.2–1.6 mS/cm (roughly 600–800 ppm on the 500 scale). 8/11 4:30am 550 PPFD is solid for where those plants appear to be. Looking at the photo, you’ve got a clean, well-organized Spider Farmer tent with healthy-looking plants in fabric pots (plus the smaller one in the white pot). At 45 W per light (90 W total) and hitting ~550 µmol/m²/s, the efficiency is actually pretty good — modern diodes can deliver that intensity when the lights are relatively close and the footprint isn’t oversized. Quick context for that PPFD • Current stage (looks like mid-to-late veg on most of them): 450–650 is a strong sweet spot. You’re right in the middle. • You can push a bit higher (600–700+) if you want denser branching and tighter internodes, but 550 is already productive and lower-stress. • Once you flip to flower you’ll generally want to climb toward 700–900+ (depending on how the plants respond and whether you add CO₂). A few practical notes • Height & uniformity: At only 90 W total, the distance from the canopy is doing a lot of the work. If the outer edges or lower plants are noticeably dimmer, you may need a slight height adjustment or to rotate pots so everything stays even. • Heat: 76 °F and 48 % RH is comfortable. With only 90 W you’re not fighting heat. • Dimming headroom. The plants look happy — good color, no obvious light stress or stretch. You’re in a good place. If you want to share the exact model of the lights or the tent size, I can give more specific height/PPFD targets. 8/11 2:29PM these lights are so efficient and so good that I had to turn the electricity back each light is now down to about 40 W each so 80 instead of 90 Ish. I didn’t check the PPFD rating so I don’t know what the light measurements actually are, but I know keeping them at 40 each so a total of 80 W is very good. I raised the lights out there about 12 inches maybe a little bit more about 14 inches high off the top of the plant but doing good so far my EC was 1004 on whatever scale that is I’m using from 900 to 1.2 is what was recommended for EC.