Likes
Comments
Share
@franc
Follow
the cycle has come to an end, the plants have been harvested and are being cured. the mother yielded 421 grams of dry flowers the clones yielded 303 grams of dry flowers. the variety changed its smell during curing, it became even more pleasant, the smell of garlic is not felt, fruit spices, very complex. the variety is generally very strong, not suitable for beginners and for daily smoking. I am very glad that such a rich harvest came out.
Likes
4
Share
@AustinRon
Follow
OG 4Q24 Flower Week 9 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 5, 2024 CR2 4Q24 57:F:8:1] End of Week: [Tue Feb 11, 2024 CR2 4Q24 63:F:8:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] #Ramping Down - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ OBJECTIVES - Ramp EC from 2.4 - 1.0 - Start rolling off Primer A&B/Silica Skin to Resin Bloom . . . __ Wed Feb 5, 2025 OG 4Q24 57:F:8:1 EC: 2.3 Notes: #5 looks like a 60 day plant, if so - consider Saturday Harvest … Runoff - [x] Amount: [ 0.125 , gal] - [x] EC: [ 4.4 , mS/cm] - [x] EC∆: [ 2.5 , mS/cm] # Fried Yet? ;-} Harvest Dehu - [x] Amount: [ 1.5 , g] __ Thu Feb 6, 2025 OG 4Q24 58:F:8:2 EC: 2.3 Refresh Reservoir - [x] Amount: [ 2 , g] - [x] EC: [ 2.3, mS/cm] - [x] Primer A&B: [ 31, ml] - [x] Silica Skin: [ 15 , ml] __ Fri Feb 7, 2025 OG 4Q24 59:F:8:3 EC: 2.3 __ Sat Feb 8, 2025 OG 4Q24 60:F:8:4 - [x] Disassemble, Clean Reservoir and Pumps, Reassemble Refresh Reservoir - [ ] Silica Skin: [ 15 , ml] - Dropping Silica Skin due to (sparse to medium) granular precipitate - [x] Amount: [ 6 , g] - [x] EC: [ 2.1, mS/cm] - [x] Primer A&B: [ 100, ml] EC: 2.1 @1900 - Clear Manifold Filter. (Mainline should be cleared on 1845 feed __ Sun Feb 9, 2025 OG 4Q24 61:F:8:5 - [x] Dilute to EC 2.0 - Flooded Tent, 2 Gallons PLUS of Runoff. Happy Plants. - Shout Out Shop-vac. ;-} EC: 2.0 __ Mon Feb 10, 2025 OG 4Q24 62:F:8:6 EC: 1.8 HAND APPLICATION Prepped One Gallon of 12-8-7-5 @ 1.8 mS/cm w/ PhotoSynthesis Plus, SLF-100 Reclaimed Dehu Water, ~2 Gallons Refreshed Reservoir, 2 Gallons Rooted Leaf Hydro no Silica Skin, EC: 1.8 mS/cm Reduced watering to 5 min, then 1 - 1 -1 -1 -1 -1 -1 -1 (It’s not like they’ve been under-fertigated) __ Tue Feb 11, 2025 OG 4Q24 63:F:8:7 EC: 1.7 - [x] EC: [ 1.7, mS/cm2] - [x] Refresh Reservoir - [x] amount: [ 2.5, gal] Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 3.6, mS/cm2] - [x] EC∆: [ 0.9, mS/cm2] # Better than 2.5! PLANT POSITIONS 3 5 1 7 4 2 6 8
Likes
8
Share
Giving Ph balanced tap water to start flushing. Will add a flushing agent halfway through the week & will do 2 days of darkness prior to harvest. 😎👍🏼🌿
Likes
24
Share
@BunnyBud
Follow
31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water). ==Update 4 Sept== By mistake, I adjusted the pH twice, once to 7 and once to 8, and obviously the plant immediately showed symptoms of incorrect pH. At the next watering, I'll give Biobizz Grow with a little Biobizz Bloom since the plant has entered pre-flowering. I'll adjust everything to a pH of 6-7 and a ppm of 450-500.
Likes
19
Share
This girl was a high effort high reward type of girl for sure. She was struggling with nutrients which is why towards the end all of the leaves were just yellow and crispy. I didn't manage to find the right balance of nutrients for her BUT the yield and end product definitely did not suffer. This strain's smell alone is 100% worth growing!
Likes
2
Share
Aroma & Flavor: Dry buds: Super loud fruity profile—like apples, bananas, and candy all mixed into one. Subtle gas on the backend from the White Runtz adds complexity and depth. The flavor is rich and sweet, making it ideal for those who love candy or dessert strains. Recommended Use: Great for flower smokers The flavor and aroma are strong, making it perfect for anyone into fruity candy strains with high potency.
Likes
4
Share
@UrbanBoer
Follow
Hands down she has raced to be the first plant that will be harvested, which I do not mind because this cheese scent she has is driving me crazy, my senses are drooling 🤤 and crying, patience is a skill reserved for the brave. Love how the LST has given me about 3 main stems, the crystallisation on this plant is incredible, it looks like I am growing it in an indoor environment. All she’s doing is fattening her buds, I hope she gives about 50grams of dry bud. I need to start formulating a questionnaire, I am going to dedicate 10grams to researching how well I grow bud, that is six strains, 10grams each, that is about 60 joints weighing a gram each. At the end I want to open my own community weed forum.
Likes
36
Share
@SAC87
Follow
Hi Growers. So all 3 FastBuds Blue Dream Auto seeds popped in less than 3 days. I’ve left them uncovered, added a humidifier and turned a fan on low to just to give them a little wiggle. They were sprayed and lightly watered in a 4” circle around the stalks to have those roots go search for water. One of the seeds hulls is still stuck to the cotyledon leaves. I’ve been spraying it to keep the membrane moist and hopefully she’ll split it open by herself. In the past when I’ve tried to remove them they cause damage to the leaves so we’ll wait and see. Just gonna give them some time and mist for a week and start super low feeding according to the FastBuds auto feed schedule. I’m looking forward to seeing these babies grow!!! Happy Growing 🌱
Likes
12
Share
@LSchnabel
Follow
Week five in flower and not much change. The buds are starting to bulk up and get fat. I have noticed a color shift in the bud as well. They are developing a pink/purple hue with a gray undertone. It’s an unusual color because it’s very pastel looking. Frost production is still on high, these things are coated like crazy already. Magnesium issue has now stopped, I’ve been adding 1/16 teaspoon of magnesium sulfate to the water every time to keep up with the demand for this large plant. Smell is very strong and hits you hard when you open the tent. When rubbing the bud I pick up a fruity pebbles smell. So far watering every other day and she is sucking down about a gallon a day of water. Run off pH was reading 6.5 which has been spot on this entire grow so far.
Likes
9
Share
@AustinRon
Follow
Week 10 - Flower Week 3 Ambassador Cartwright Ambassador Cartwright by IRIE Genetics Transition to Flower Afterglow X Arise (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise ______________________________________ Start of Week: Saturday 10 September 2022 AC3Q 57:F:3:1 to 17 September 2022 Summary: Plant HeightBeginningOfWeek: [ 20, in] Plant HeightEndOfWeek: [ 26, in] *TBD* Temp: 74.8 RH: 70.7 VPD: 0.88 kPa # need to get into the 0.9 -> 1.1 Early Flower Autofertigation - Enable - [ ] Growtek RINGS Calibrated - [ ] Growtek RINGS INSTALLED - [ ] Growtek OPERATIONAL LightSchedule: 12/12 amt: [ 1300, ml] # period: [ 360, min] frequency: [1, day] times: { first: 2100, second: 0300 } # Auto Only!!! Otherwise 1.3 @ 2100 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 0.8] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.7, 1.8] ECearlybloom: [ 1.1, 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.8, 1.1] [ 1.1, 1.4] ECflush: [ 0.0, 0.2] Seedling Early Veg Late Veg Early Bloom Late Bloom Ripen Flush 400* – 500 1100 – 1400 1200 – 1500 1100 – 1400 1300 – 1600 800 - 1100 0 - 200 Fertigation Daily: - {pid: 4, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} - {pid: 7, amt: 1300 ml, ec: 2.0, pHRange: [ 5.5, 6.5], time: 2130} FertigationtheRootedLeafFullRatios: # Flower Week 3 Primer A: [ 10] Primer B: [ 10] CalMag Fuel: [ 6] Silica Skin: [ 4] Lush Green: [ 4 ] Root Anchor [ 6] Peak Bloom [ 4] Resin Bloom [ 2] Last Week of Foliar FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] FoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.63, ml, 500, ml] # Cease Begininning Flower Week 5 NEW WEEK Week's Plan - (Added Veg week to allow SuperCropped Mains HEAL.) - [ ] Install Growtek Fertigation w/ 8” Rings - [ ] Run Feed Lines & Cut to Optimal Length - [ ] Calibrate Feed - [ ] Install Drain Lines, Cut to Optimal Length - [ ] Notch Drain Tube end to eliminate vacuum against drain pan _____ Sat 10 Sep 2022 AC3Q 57:F:3:1 # PM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 LightIntensity: [ 824, µMol/m2/s2] LightDLI: [53.4, mol/m2/d] Sun 11 Sep 2022 # AM IS 9PM Local TIme, the Night BEFORE. AC3Q 58:F:3:2 NOTE: - We’ve added a couple inches removing all restraints, and having flipped last week. As frequently observed, Both plants were clearly vibrant and vigorous after a nights sleep after restraint removal. - Zymes/Bonners/Ascorbic Acid - Soil surface, container sides, and container bottom (exposed roots) - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1000, ml], ec: 2.4 # AM - [x] Complete Previous Weeks GrowDiaries - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 # PM - None Mon 12 Sep 2022 AC3Q 59:F:3:3 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 - [x] As Below FoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 2.5, ml, 500, ml] Tuesday 13 Sep 2022 # AC3Q 60:F:3:4 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.4 pid: 7, amt: [ 1200, ml], ec: 2.4 Wednedsay 14 Sep 2022 # AC3Q 61:F:3:5 #AM - [x] As Below Fertigation: pid: 4, amt: [ 1300, ml], ec: 2.2 pid: 7, amt: [ 1300, ml], ec: 2.2 - [x] Apply as Below FoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 0.63, ml, 500, ml] Thursday 15 September 2022 # AC3Q 62:F:3:6 # AM - [x] As Below Fertigation: pid: 4, amt: [ 1200, ml], ec: 2.2 pid: 7, amt: [ 1200, ml], ec: 2.2 Friday 16 September 2022 # AC3Q 63:F:3:7 # AM - # PM - [x] As Below Fertigation: pid: 4, amt: [ 1400, ml], ec: 2.4 pid: 7, amt: [ 1400, ml], ec: 2.4 _______ Saturday 17 AC3Q 64:F:4:1 CEASED FOLIAR Application: 2022-09-17T16:02:06-0500 # - [X] Complete Week’s GrowDiaries
Likes
34
Share
@Roberts
Follow
FBT2308 is growing great under the Medic Grow Mini Sun-2. She is heavy bulking now. Looks like she will get some great colas on her. She had a solution change today, and new air stone installed. I changed the solution as I had a big spike in ph. Which caused a little spotting. So had to fix that with new nutrition. Nothing else to report at this time. Thank you Medic Grow, Agrogardens, and Fast Buds. 🤜🏻🤛🏻💪🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
70
Share
@Fatnastyz
Follow
3-26 Day 69 Game time 1.2 grams. Green Sensation 1.5ml, frosty nugs 1ml, cal/mag 2 ml, 1.5 ml slf-100 and 1.5 ml drops of balance. Made 6 liters water. Ppm in 265 ph 6.0 Runoff ppm 956 ph 6.8. I believe this was her last light feed. That home stretch is in the sights. LETS GO! 💪💪💪🤘 3-29 Plain ph water Ppm in 10 ph 6.2 Runoff 746 ph 6.9 after 5 liters Gave 1000ml more Ppm 605 ph 6.6 Mark this as start of flush 💪 Lets go!!!!! Super stoked 🔥🔥🔥 See you next week!
Likes
16
Share
@Mrg7667
Follow
Still see nitrogen toxicity so im going cut biogrow down to half dose and see how it goes! Besides that all looks well Smells are stepping it up in a couple pheno! On the Chocolate Marshmallow side we have a intense sour fruity pebbles on a pheno that is just unreal And on the double d side we have some rotten tooth chem smells coming through!
Likes
Comments
Share
@mihixd
Follow
D29 Topped all her main node sites, going from 4 to 8 branches. Defoliated canopy to reduce overlap and promote airflow since I saw minor bites in my leafs. D31 ALL my new growth looked brown? This combined with the increasing biteholes in my leafs told me I had to act. I suspected the brown growth to be a root/overwatering issue so made sure to hold off on watering for now. For the bugs I used a 3% hydrogen peroxide dilluted 1:10 in a spray bottle with water. Sprayed leafs bottom and top till drenched, kept coming back every day to spray whenever i felt like it. D34 No increase in any signs of bugs, all new growth was completely green, new branches growing out. Seems like the treatment worked and decided to feed again since soil 10cm deep was dry. 4L with 0.5:1000 calmag 1.5:1000 grow and 1:1000 PR. Watering slowly to ensure even distribution of water throughout soil, want that rootmass to grow huge! D35 Weather forecast for upcoming weeks looks amazing, moved her outside again. Since the autos im currently running need light priority for early vigorous growth, my Frisian lady had to make do with very low PPFD levels (80-250). All things considered she performed really well this week recovering from bugs, root issues and very low light intensity.
Likes
19
Share
📅 D119/D03 - 13/03/24 🚀 Drying 🎬 Added 22 pics and the timelapse of the harvest ________________________________ 📅 D120/D04 - 14/03/24 🚀 Drying ________________________________ 📅 D121/D05 - 15/03/24 🚀 Drying ________________________________ 📅 D122/D06 - 16/03/24 🚀 Drying. First trim : 3 g and a tiny flower placed in the jar for curing ________________________________ 📅 D123/D07 - 17/03/24 🚀 Drying ________________________________ 📅 D124/D08 - 18/03/24 🚀 Drying. I've made the very first try and she's very promising 😍😍😍 @Pure_Instinto_Seed_Bank ________________________________ 📅 D125/D09 - 19/03/24 🚀 Drying. Trimmed 7 grams and start curing of about 10 g for now. She's very sticky and very fragrant with an intense smell. Lot of rosin stucked to the scissor, good sign ! 😊 ________________________________ 📅 D126/D10 - 20/03/24 🚀 Drying. She's quite ready for trimming, I'll start tomorrow ________________________________ 📅 D127/D11 - 21/03/24 🚀 Drying. Trimmed 14 g from one of the main bud.... Less than expected but very dense, high quality buds ________________________________ 📅 D128/D12 - 22/03/24 🚀 Drying. Trimmed 11g ________________________________ 📅 D129/D13 - 23/03/24 🚀 Drying. Trimmed 22g ________________________________ 📅 D130/D14 - 24/03/24 🚀 Drying. Trimmed 11 g ________________________________ 📅 D131/D15 - 25/03/24 🚀 Drying. Trimmed 12 g ________________________________ 📅 D132/D16 - 26/03/24 🚀 Drying. Trimmed 16 g + 20 g + 16 g = 52 g. So far 132 g in total and 2 buds missing ________________________________ 📅 D133/C01 - 27/03/24 🚀 Trimmed last 15 g - Total outcome is 147 g. First day of curing
Likes
17
Share
It was interesting, my first growing from beans. I knew this is a strain that stretches, but I never expected 150cm of girls. Incredibly resistant, during the whole vegetative phase I did High Stress training mistreating them but without scratching them I did schwazze defoliation to counteract the heat and too much humidity but the girls continued bulking, really strong! First experience with co2 from the next diary everything will be documented. Goal set at 500g ... let's see at the end of the treatment ... Keep it growing gromies 🍀🍀🍀
Likes
16
Share
Pianta very good... complimenti a fast buds.come sempre si più dire che sono tra i migliori creatori di auto...grandi fast buds.continuate così arriverete AD essere lì migliori in assoluto,🤞👍💪💪💪💪
Likes
12
Share
@Socal6pak
Follow
THIS WEEK THEY ALL BOLTED. I GAVE ONE GAL AWAY TO MY FRIEND. SHE'S INTERESTED IN GROWING. SO NOW IM DOWN TO 3 RHINOS. GROW IS VERY GOOD. I DECIDED TO LST 2 OF THE GALS. AND I'LL COMPARE THEM TO ONE W/O ANY TRAINING. SO FAR GROWTH IS VERY GOOD. VERY GREEN. AND STRONG STEM. NOTHING STRANGE.
Likes
93
Share
I’ll update more info after a nice cure! Update: So in conclusion. Super easy Grow. She didn’t give me any problems. Only problems were the heater torching some buds. I put her in a 7 gallon smart pot just to see what an Autoflower would do. Well she paid off and then some! Ended up with 144 grams of some primo FastBuds!00