Weekly update on these 3. They're super close to being finished, likely getting g the chop this week. One is definitely getting more of a fade then the other 2 which is cool. Rock solid buds and sticky beyond belief when touched. Happy Growing

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1. 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%

Day 31 - 38 (Day 32) I’m going to lower the humidity in the room to 55-60. Still no bananas but I’m still quite worried about #3 fully popping and ruining my whole crop. Since there is a good chance it’s going to herm, I’m going to give it with a small feeding today and watch it like a hawk this week. I think the boost actually made a decent difference in #5 from last week. I’m seeing slightly fatter main colas but that could just be from less topping/smaller plant or less nitrogen. I’ve decided to push my luck and give a boost to each plant. These things just aren’t filling out like they should. They look like they are on day 23 not 33. I’m going to top dress 3 tablespoons of 1-4-2 Destiny launch and later tonight I’m going to water in a low strength feeding of 0-0-15 kelp extract. I’m going to give a final heaping tablespoon of nature’s pride bloom to #5 so it can stretch to the end. I’m also going to lower the lights by a few inches. The tallest cola is now about 13 inches away and the rest of the canopy is at about 18–24. If I see signs of light stress I’ll raise it back up but I’m sure it could use the extra light on the lowers. (Day 33) I’ve been reading that bigger plants just take longer to mature and that’s probably why my plant hasn’t fully filled out or is about a week behind. I still could have done a better job defoliating some of the smaller larf branches on the bottom which just robs the good branches of energy. The more I think about it, the more I think I did a very poor job of defoliating the middle canopy. I’m still seeing lots of larf and small buds on the inside not getting much light. I’m still really worried about herms after finding that branch so I don’t want to stress them anymore. Removing suckers now is pointless. I missed my window of opportunity and now I have to deal with it. I’m going to slide an old DVD player underneath #6 to bring it up to canopy level. It’s lower buds are definitely not getting enough light. (Day 34) Ever since lowering the light, the canopy has gotten a few degrees warmer. I’ve noticed the buds don’t feel as sticky on top compared to the lower tucked branches that feel almost wet with resin. Outdoor weed grown in my climate will never reach the temperature where it degrades resin luckily. (Day 36) The buds are definitely swelling but not to the degree I want. Call me picky but I prefer my nugs as chunky as possible. I’m seeing lots of pistils but not much nug matter. Ive heard too many pistils can be caused by the overuse of alfalfa, kelp and seaweed extracts because of the natural PGR’s in them. I’m definitely going to reduce the amount of that stuff I use next round. I hope I’m just wrong and this tent is going to really fatten up this week but I have my doubts. (Day 37) A purple fade is starting on the underside of every plant except the bush who still is super dark green still. Last watering I got a nice amount of runoff so I’m just going to leave her until the end. I’m seeing a bit of yellowing on #5. I’m going to give it one final full strength feeding plus some rock dust and oyster shell tomorrow and that’s a wrap for nutrients. I might as well hit everything else with a final low strength 0-0-15 too. (Day 38) I’m amazed at how much this stuff smells compared to my last round. It smells very earthy and floral with a hint of pine. Definitely not that gassy smelling pine but more of a sweet pine.

Lil younging coming good towards the end of the week jus decided to send dem to flower...get a lil smoke and allow the mother to continue do their thing until cut day...other than that everything is going accordingly also got back 1 of the plants that I had sent on a breeder project she's full of pollen sack now(female chromosome only) should have some feminized seeds once all goes well...gonna double up the breed and also do a

👌

End of week 5. Huge gains in all ways. Plants are quite big and lots of buds developing really fast. So far they are much more ahead of the other strains I'm running. Very fast plant. Very smelly, delicious.

A medium size plant that’s compact with some super growing abilities. I wish I had a clone of this one it grows colors all over and has some super foldable buds this a a winner for sure

We did a lot to these girls this morning with many moving parts, so long entry today. Now that we are in flower, & with the data I've collected so far, I'm going to need to stay on top of the stretch with bends to keep them at a reasonable height. I'll plan to access & adjust on Wednesdays & Saturdays. One thing I want to mention about my style of growing, is that everything I do is with a specific intention. It may seem complex & labor intensive, but in reality, I spend very little time actually working in my tent. I plan & research heavily before each grow & use the data I collect to anticipate plant response. I try my best to be precise & I have a low to zero entry policy. My plant do all the heavy lifting, I just intervene to guide them into a structure that fits my space. Tent Entry Time-1 hour 40 minutes Week Total-1 hour 45 minutes Veg Total-4 hours 52 minutes Removed straw mulch from each container & placed in separate buckets containing plain reservoir water. Removed all fan leaves not directly attached to a growth tip on each plant. Removed plant material salad chopped then mixed with straw mulch in respective buckets to soak. Removed Bud Clips from each main and relocated below the top node of each main branch to spread at 90° angles. Top dressed each plant, working into the top 1/2 inch with hand rake. Heavy top dress as I'm working with 7 gallon containers. -Top Dress (Divided)- 6 cups Build a Flower 3 cups Vermicimpost 1/2 cup Craft Blend 1/2 cup Ocean Blend & Trace Minerals 1/3 cup Kiss My Frass 1/4 cup Kashi Gold Each top dress capped with 4 cups reclaimed 60/40 blend of Roots Organic Original & Coco Coir Hand watered each container with 6.5 ph, 13 ppm, plain reservoir water mixed with 1/2 tsp each of horticultural aloe powder, horticultural coconut water powder, & Build a Bloom, with 1/4 tsp each of Recharge & quillaja powder. Mixed & soaked straw & plant material restored to respective containers. Photoperiod adjusted to 12/12 Deep red supplemental lighting activated to run 15 minutes before lights on & 15 minutes after lights out. Far red supplemental lighting replaced blue supplemental & synced with main light. DLI now at 28, & should raise naturally throughout the week. We will reassess Wednesday evening. VPD range set to remain at 1.1 -Expression #1- Prior Week Height-10" Width-20"x18" Pre-Patrick Swayze Height-16" Width-26"x24" Post Patrick Swayze Height-14" Width-13"x12" -Expression #2- Prior Week Height-8.5" Width-15"x14" Pre-Patrick Swayze Height-14" Width-24"x22" Post-Patrick Swayze Height-12" Width-12"x11"

the weather forecast says 2 weeks of rain, it will be a challenge to keep the humidity low in the house and of course in the growbox.

This was a good week, Its was my first learning experiment that an under watered plant=dry, droopy, unhappy leaves. A properly watered plant= happy smooth, fluffy, lush leaves. I hopefully won't mess up again. The presence of a missing bit of leaf indicates that a bug was enjoying being on my leaf..I had caught an elm bettle and immediately grabbed it, but it must be had lunch first. I hope it was an isolated incident. However probably a good washing/wiping of the leaves is overdue. I added the @Foxfarm Open sesame into the nutrients as I read a couple diaries that reported an increase in bud sites. I also added an additional cfl light to keep trying to bulk the middle. Ill need to start hardening off the plant as outdoor planting time is roughly 2 weeks away. I added a short video of my very basic and simple setup, for anyone anywhere to begin a grow. My apologies at not having one on my first week documentation. Happy growing to everyone, and best of luck to the outdoor crews.

Bud production has been great! Amazing orange candy aroma bellowing off her flowers. Shes starting to rev up the trichome production. Everything is moving steady. Apologize for poor media this week. Shes tucked in the back and is harder to access for pics. I will try n get her out next week. I reduced the nitrogen dose again. I also stopped giving her vigorous. Its a pure bloom mix now as this lady is booming with flowers. Until next update. Happy growing and stay lit fam.

Que hay familia, vamos con la quinta semana de floración de estas Runtz de Zamnesia y empezamos con riegos intercalados cada 48 horas controlando siempre el Ph, que ahora mismo lo dejamos en 6.5 . Temperatura y humedad dentro de los parámetros correctos. Seleccioné de las 5 plantas, 3 , que creo que son los mejores ejemplares que por el momento están creciendo bien y tener tienen un buen color, se ven bien sanas, todo normal hasta ahora, van cogiendo forma y están produciendo una tricomada bastante seria, están increíbles. Vamos viendo cómo progresan. Hasta aquí todo, buenos humos 💨💨💨.

Llevamos 13 días desde que se empezaron a germinar, hoy 23/10/23 empezamos a contar la primera semana de crecimiento. He usado ROOTS y GROW de BOOM nutrients. Ya tengo 2 o 3 a punto de descartar, tienen alguna malformación y no crecen igual de rápido esperaremos una semana mas.

Well, it's finally time for an update, right? And for a newbie like me this week has been quite eventful! 😲 After last week's "Helmet Head" (which I suppose was my fault for not burying the seed deep enough 😱) her leaves started to look twisty, Honestly don't know why that happened but my three hypothesis are: because that's just the way she is, because I didn't properly bury the seed or I made a mistake somewhere else. However I also think she looks pretty and this makes her look quite "special" 👍. In her 6-7th day after sprouting I noticed her leaves started to look even more twisty and she was about to outgrow her cup. I worried and decided that it was the right moment to transplant her. At first I didn't know "how" to do it and all I knew is that I could shock her if I did it wrong (which worried me haha 😨). None of the sites I checked really specified any kind of information regarding how I should prepare the medium for the new plant (just some vague information here and there) so I came with the idea to just water it bit and then "massage" the soil to avoid making it "lumpy" and I feel it did work out well in the end! I feel I didn't shock her much and in her second day she was growing even more as well! Nice! 😍 Next week I'll start feeding Puff with some nutrients but the PPM of the tap water where I live is somewhat high (around 600) and it's electroconductivity is around 1200 us/cm but a lot of growers in here still use it (they just wait for chlorine to evaporate) so I'll try doing the same. I'll use half dose of Biobizz Bio Grow and half dose of another product called Gold Sunshine from Quemanta (which is Cal-Mag with some amino acids) and see how things develop! 😃 I'll try to see if I can make my DSLR take the photos for future timelapses, because my webcam sucks for that job! Thanks everyone for reading 😉

The plant was harvested and trimmed, yielding a total of 101 grams. Buds are notably dense and carry a satisfying weight, indicating strong structural development and resin content. Their visual quality is exceptional—each nug shimmers with a velvety green glow, reminiscent of fine fabric under light. This appearance may reflect optimal trichome coverage and healthy chlorophyll retention at harvest. The results suggest that the timing was well-aligned with peak maturity. Further analysis during curing will confirm aroma, potency, and terpene preservation.

Ztrawberriez autoflower is growing great in her perlite tub. She just shot her first pistils. I did some lst and defoliation on her today. Getting her ready for the stretching to come. She looks very healthy, and is grow strong. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419

These ladies are starting to show their true colors and smells...exciting times ahead