Day 56 Flowering: This week has been a great week to understand the difference between strains. now close to finishing , it is clear to see how different the bids can look to each other dependant on lineages too. Six shooter has really surprised me with her rapid gains in bud girth. She has seemed to be a lot smaller and somehow stunted for most of the grow. This week has changed her completely, even down to her lower buds which also look a lot thicker than a few days ago. with approx 12 days to go, she could be one of the contenders for yield. She is also very frosty looking now with a nice sweet hit to her. Strawberry Pie is really starting to colour her buds up now and even though they are not joined up colas , each clump looks to be fairly dense and heavy. The buds under direct light at the top look less chunky than the lowers with her too which is a first for me. The light is penerrating lower than I thought due to the structure she has. There are some nice looking lowers just putting new pistils out so she may go a little longer than her 8 weeks stated. Mexican Airline is my secret favourite this run. Hwr bids are stunning looking spiky ,bursts of colour now and with a little longer to go , I wonder how she will look with even more ripening and fattening out. She is a very tall plant and i will train better for the next time I grow this strain. I have had to support a couple of the limbs now as they want to fall with the weight of the buds . I am on standby with more yoyo's if I need them. lol These have been a pleasure to grow as expected and I am now popping some Fast buds Cream cookies auto ( x2) to run next. I dont doubt they will be great to grow. be safe and free growmies.

Welcome in official week 8 of flower 🙏 Girls are in full flush mode what we can see on fan leafs. Rest of Nitrogen is being sucked from all fan leafs what suggest that root zone is now clear. They are getting 2l per every 24h From what I can see all trichomes are now cloudy with few amber. I will give them another 4 days before chop. Next week will be the final one in this garden. How many Oz we will pull out this time? Stay tuned!

Remaining three plants in the tent have now gone into flush. The Cherry is looking good, the quality looks like it’ll be fantastic, the smell, wow great sweet cherry funk......🤔cherry? Well fruity for sure. Ima enjoy dis girl when she done.😍😍😍

So this week was just a few adjustments in regards to environmental conditions...done abit of defoliation for air movement and prevention of extra moisture...The aim is no mold or bacteria having any chance to multiply or even exist..absolutely not! I ain't about to ruin this ladies! Other than that...no issues..just maintain the process and environment. I do not want any major changes in that regards, especially during the early flowering stage. I would like to thank all the Grommies for checking out this grow and showing love.🌿

starting to smell like a winner!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Easy week Potted coco 3 gallon fabric Started General Hydroponics 3 part with CalMag

Steady growth. Start of week at 9.5 cm. Slight leaf issues. Too much nutes. Fed water at end of week...

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

lots of work went into moving these girls outside. They are in a nice sunny and protected spot now. Can't wait to see these girls grow up. Gave them the best start I could. Season is a bit late here this year too.

So Flowering has started, I defoliated a bit and started giving some Bloom and flower...the humidity is starting to stress me out because its super humid outside and getting some crazy RH (70/80%) I need to fix this before it becomes an issue. So I moved my clip on fan to the bottom to see if I could move the canopy a bit better. it lacks power though.

EC 1.5 -> Runoff 1.0 Raising EC to 2!

Day one of Early Veg For these Hydroponic systems. . . . The water pump for the aeroponic system was blocked from running. . . We adjusted some materials for the system to work more effectively. . . . Due to the water pump running without a chiller, the water temp was at 33C which is much too high. . . . We set the pump on a timer that will turn on for 15 minutes every hour. . . . We also turned on the AC to cool down the room. . . . Hopefully with all of this, the aeroponic system will be running with little to no problems . .

Ancora pochi giorni ed è arrivata al traguardo.forbibben runtz very very good.fino AD oggi è la autofiorente più buona che ho trovato per la mia patologia.mi Allevia tutti i dolori e tutte le pene della vita 😂🤣🤤😍💪..grazie a madre natura e a fast buds per aver creato questa bella, preziosa e sacra pianta..... Om namah shivaya

Week 21/1 - 27/1

Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.

I added a second LED which works with more purple/red light additionally to my full spectrum white light to give the buds more the wave length they prefer. Seems like the new light pushes them to spread and elongate their branches, especially the main stem.

Day 62 even though she is early in flower she is showing some serious resin. Lots of trichomes. Smell is strong and sweet. I can't wait for this one.

La primera semana de floración les sentó bien la echaron su sexo, hembras, ahora ya queda ir viendo cómo se forman las flores. La temperatura no pasa a los 30 nunca.