Likes
Comments
Share
Likes
1
Share
@Ninjabuds
Follow
It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.
Likes
5
Share
All in all there were some major mistakes I made myself in which I can honestly say I think has affected the yield and quality to some extent. As this was my first use of the equipment for this run. After everything I have learnt on this run I hoping the next one there will be no errors at all.
Likes
8
Share
@Kappa420
Follow
High temps, plants are extremely short and progress very low. Added some rhino skin to help.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
66
Share
Woche 12 | Laughing Buddha | Der Umzug ins Hobbit-Megaprojekt Diese Woche stand ein Meilenstein an. Die Autos sind geerntet und gecurt, die Gorilla 720W hängt endlich an ihrem Platz und die Laughing Buddha durfte in ihr neues Zuhause umziehen. Und was soll ich sagen? Sie scheint den Umzug nicht nur gut verkraftet zu haben… …sie scheint darauf gewartet zu haben. 😅 Das neue Zuhause In den letzten Tagen wurde der große Growbereich aufgebaut. * 120 × 120 cm SCROG-Fläche * Zwei Netze (später zur Blüte sogar drei) * Gorilla 720W LED Gen II * Controller mit Sensorik * Klimaanlage * Luftbefeuchter * Mehrere Umluftventilatoren Auf den ersten Blick wirkt das Setup fast absurd groß für eine einzelne Pflanze. Als die Buddha frisch eingezogen war, wirkte das Netz riesig und die Pflanze fast verloren. Keine 24 Stunden später sah die Sache schon ganz anders aus. Test der “Billig-Lampe” Bevor die Laughing Buddha endgültig ihren Platz bekam, wurde noch eine günstige LED getestet. Das Ergebnis war überraschend positiv. Für eine preiswerte Lampe lieferte sie deutlich mehr Licht als erwartet und könnte für Anzucht, Stecklinge oder kleine Projekte durchaus interessant sein. Trotzdem wurde schnell klar: Für dieses Projekt spielt die Gorilla in einer ganz anderen Liga. Der Unterschied in der Lichtverteilung ist enorm. Erste Messungen mit der Gorilla 720W Natürlich musste die neue Lampe ausführlich getestet werden. Aktuell läuft die Gorilla auf: * 50 % Leistung * 50 cm Abstand Gemessen wurden dabei rund: 374 PPFD Das klingt zunächst wenig für eine 720W-Lampe. Man darf aber nicht vergessen: Die Fläche ist riesig und die Pflanze befindet sich noch mitten in der Vegetationsphase. Der Vorteil liegt aktuell nicht in maximaler Intensität, sondern in der unglaublich gleichmäßigen Ausleuchtung. Die Buddha bekommt jetzt Licht auf die komplette Krone statt nur auf die obersten Spitzen. Klima läuft erstaunlich stabil Die ersten 24 Stunden nach dem Umzug wurden genau beobachtet. Temperatur: * Nacht: etwa 21–22 °C * Tag: etwa 23–24 °C Luftfeuchtigkeit: * meist zwischen 60–65 % VPD: * überwiegend zwischen 0,8 und 1,2 kPa Genau der Bereich, den ich aktuell sehen möchte. Besonders interessant: Die stärksten Wachstumsschübe fielen genau in die Zeit, in der Temperatur, Luftfeuchtigkeit und VPD optimal zusammenarbeiteten. Die Buddha scheint sich unter diesen Bedingungen ausgesprochen wohlzufühlen. Die Reaktion der Pflanze Und jetzt wird es verrückt. Die Triebspitzen lagen nach dem Umzug vollständig unter dem Netz. Nur etwa 24 Stunden später drückten sie bereits wieder nach oben. Das Wachstum ist aktuell beeindruckend. Die Krone wird breiter, dichter und gleichmäßiger. Der Stamm hat mittlerweile eher die Dimension eines kleinen Baumes als die einer Zimmerpflanze. Besonders erfreulich: Die Mitte arbeitet genauso aktiv mit wie die äußeren Bereiche. Genau das möchte man bei einem großen SCROG sehen. Der Plan bis zum Urlaub In zehn Tagen geht es für zehn Tage in den Urlaub. Ursprünglich stand die Frage im Raum, ob die Buddha vorher noch in die Blüte geschickt werden soll. Nach reiflicher Überlegung fiel die Entscheidung dagegen. Der neue Plan: * Weiter wachsen lassen * Netz 1 füllen * Etwa 10 cm Höhe gewinnen lassen * Die Spitzen ins nächste Netz wachsen lassen * Bis zum Urlaub weiter verteilen Während des Urlaubs wird lediglich gegossen. Nach der Rückkehr folgt: * Große Bestandsaufnahme * Triebe neu verteilen * Alles auf eine Höhe bringen * Unterhalb der Netze gründlich aufräumen * Kurze Erholungsphase Erst danach erfolgt der Wechsel auf 12/12. Kontrolle statt Rekorde Ursprünglich stand die Idee im Raum, etwa 72 Tops unter den 720 Watt zu platzieren. Das bleibt weiterhin ein spannendes Ziel. Allerdings wird die Kontrolle über das Blätterdach wichtiger genommen als eine möglichst hohe Anzahl an Trieben. Lieber 50 bis 60 perfekt positionierte Speere als ein völlig überfülltes Netz. Alles, was später nicht sauber ins Konzept passt, wird konsequent entfernt. Am Ende zählt nicht die Anzahl der Triebe, sondern die Qualität des Canopys. Fazit der Woche Diese Woche hat gezeigt, welches Potenzial in dieser Pflanze steckt. Der Umzug verlief problemlos. Die Gorilla liefert exakt das, was ich mir erhofft hatte. Das Klima arbeitet stabil. Und die Laughing Buddha scheint gerade erst richtig in Fahrt zu kommen. Noch steht sie mitten in der Vegetationsphase. Noch laufen lediglich 50 % Lampenleistung. Noch ist nicht einmal das erste Netz vollständig gefüllt. Aber zum ersten Mal habe ich das Gefühl, dass dieses Projekt etwas ganz Besonderes werden könnte. Die nächsten Wochen werden zeigen, wie weit die Buddha dieses Netz tatsächlich erobern möchte. Eines steht fest: Langweilig wird es definitiv nicht. 😎
Likes
40
Share
She is starting to fade on her own... I will start flushing her today... 👊😎
Likes
12
Share
The final flush begins for Amnesia lemon haze. She smells awesome, has decently large buds and a good amount of frost. That's all for this week, tune in next week when she gets harvested! 👽🌳🔥
Likes
10
Share
Hello Diary, Purple Lemonade has reached the end of the second week of flowering. The flowers have started to form nicely. The areas around the flowers themselves are lighter so it is clearly visible where all the flowers are forming, and I have much more motives for taking photos. Purple Lemonade has started to stagnate in growth, this week it has grown 8 cm. At this stage Purple Lemonade has taken its final form and now the plant will direct most of its energy into the development of the flowers. The leaves are a healthy green color and so far I do not show any signs that the plant is lacking anything. Watering was every three days, I continued to add CalMg and Bio-Bloom Fertilizer. The conditions in the grow box are now much better. The temperature is around 28 degrees and the humidity is below 50%. Purple Lemonade is progressing very nicely so far, which I am very happy about. Here is a short overview of the week. 24/08/2024 - Day 31. Watering. I prepared 9 liters of water. I added CalMg 1 ml/lit, Bio-Bloom Fertiliser 1.5 ml/lit and then lowered the p.H. to 6.0. With this amount I watered all three plants evenly. 27/08/2024 - Day 34. Watering. I repeated the same procedure as three days earlier. 28/08/2024 - Day 35. End of the second week of flowering, or the fifth week from the beginning of vegetation. Photographing and measuring the height of the plants. Purple Lemonade - Day 35. - 60 cm That's all from me for this week, see you soon.
Likes
6
Share
Nice roots coming through. She's healthy and coming along steadily.
Likes
16
Share
Das ist Weltklasse. Damit könnte ich international an Cups teilnehmen.
Likes
15
Share
This week went great. The ladies are still looking happy and healthy. Bud sites everywhere. One plant is monster cropped and looks insane. As far as I can tell they are done stretching out now. Took off some leaves covering bud sites and some of the bottom limbs not getting much light. Happy Growing y’all 🔥💨💚✌️🏼
Likes
15
Share
This week I decided it was time to employ some LST. Really I should have just done LST and not topped them, aside from the largest one which responded well. They weren't putting out fast enough growth to take to topping well, and I've learned my lesson. That's why my autos haven't done so well in the past. I'm still learning😬 So in order to get as much as I can out of them as we enter flowering, we're doing a little LST this week. Earlier in the week I did have to bring them in the hoop house on 7/11 because we got a lot of rain that day, our basement flooded and the water got so high in the stream that it washed the bridge out. So I think I made the right decision otherwise they may have gotten lockout. I also changed their feed a bit. I added in some Neptunes Harvest Fish Fertilzer 2-4-1 with the Alaska 5-1-1 in equal portions on the 13th and will continue with it tonight. I may add a little molasses as well. Most of what I was trying to accomplish with each plant is explained in the video. Enjoy!
Likes
9
Share
Likes
22
Share
@Slobasian
Follow
Love every plant each one is growing differently stacking different even the visual difference of one strain growin two different ways combined smells of diesel, pez candy and lemons
Likes
5
Share
🌱: Loopking yellowish, no burnt tips, so switch tp 2ml/l Supermix 💧 : 8l 💡 : Dli: 45 mol/m²/d 🤔:
Likes
5
Share
Just a amazing lady to have grown. Very pleased with her. She has been growing a little later in the season then I planned but she did well even I’m with the heat. I’m glad with how she turned out. Very nice lady. Would grow her again. 🎂🎂
Likes
6
Share
@godido
Follow
This time I got bunch of photos for you. As I’ve wrote before, I do some LST with NYC. It’s slow process but I see progress. I tried to ties with garden canopy lane without harming my baby’s little colas. This my first time growing. I assume that you know this nice feeling of caring about your first grow. That new experience is very uplifting, don’t you think? If you want, and If you are in the mood for share your thoughts about growing philosophy I would like to see you point of view. I think it will be nice to see what community awe are here. Does anyone grow NYC or White Widow autoflower seed? :) High and Hey🤪😙
Likes
16
Share
Week 7, one more week and i will harvest this precious girls, they dont require lot of attention and even slightly less nutrients would have done the trick! I still have 1 of these ladies in veg so i now what to expect and what to do! Great strain, very generous with very little attention, the perfect strain, a very nice sweet smell, it reminds me of candy very sweet, its going to be delicious for sure!