Gone in to flower so started on some bloom nutes this week and also gave them a good defoliation

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

I'm so inpatient it's unreal , can't wait to see there journey

Setted up this cutting of Skywalker. Having some initial problems with air and humidity. Hopefully is going to rain soon so humidity will rise a bit. Planning to do some LST and ScrOG. I'm helped by a friend because my skills are not good enough yet. Let me know if you liked the sequences! I'm trying to do some timelapse research as well. Raspberry is running the timelapse and compiling the video I'm trying to update every day or two. 😷7/12 Changed water due nutrients deposit. Clean start as the roots have touched the water. EC 1.5 Ph 6.2 😵Ps. light was set with VEG and BLOOM BOTH ON! Lol, hopefully this is the 5th day 😂

Weekly update on these beautiful ladies. A little late on the update I was out of town for the weekend and couldn't get to it before I left. They're Growing amazing and wow did I come back to a jungle. They'll definitely be getting a defoliation and lollipop this week as it's needed. All in all Happy Growing

Scrog netting is becoming a challenge, I am trying to fill bottom right corner but the plant continues to grow in all directions. The areas that are filled keep growing, I have stopped topping and keep tucking. I have put 4 clones in the corner because I do not want to wait anymore as my 2x4 will get too big during the flower cycle of this tent. Turned off light and will keep off for 48 hours, officially starting the flip into flower cycle. Plants look good, no issues so this is the perfect time for me. Wish me luck, I hear this strain loves to really stretch. Fed nutes at 50%, they just got off a lockout so taking it easy, they'll tell me when to up the feed.

Buddin

They have settled in good after last weeks transplant. Of the 2 plants #1 might be 1/2" taller. Keep in mind I am very new to this and dont yet have a trained Eye, but I would have to say these to are near identical. Idk the filial generation this crop, but the things ate growing like clones! Really uniform. One noteworthy item; they aren't really fans of extreme heat. Right now I have them in my seedling tent which is currently running at 85° give or take. Sho the other strains love it. Choc mint OG is showing very mild heat stress tho

Wetter war gut, nur einmal Regen, 3 fat banana sind im trockenraum, die anderen beiden kommen in den nächsten Tagen dazu.sind fast fertig. Die zz legen an buds zu, wie sie sollen, Nr.5 schon im fading... special queen macht sich langsam. Toppen war die richtige Entscheidung. Critical verzweigt sehr gut 👍. Lst funktioniert. Nächste Woche kommt der erste erntebericht... ich freu mich. Bis nächsten Freitag ✌️

Yellow big leaves . Buds 🙂 ok . No nutrients start flush with bud Candy . Great happy qeens 😍 best wishes 👏

Ho preso oidio presto spruzzo la cura

08/21/24. Going into week 8 flower Day 57 out of stated 64. So one week left exactly. I’m not sure on that. She’s still drinking at the same rate as usual, and there’s still quite a few white hairs. I’ll be looking at her trichomes today anyway, just to see where we’re at. Either way she’s getting just water from here on out. She’s dark af and has some nutrient burn anyway, so I’m sure she’ll be fine. She’s fattened quite a bit more than I expected. Seemed like her buds would be kinda long and skinnier. No complaints here though. She’s getting pretty damn frosty and sticky too. She has a kinda piney sweetish smell. Start the count down ⏰ See yuh ✌️

Hello. I've harvested the Mega Mouth. WOW!!! I'm very impressed with this strain. Over 1.5 k for 5 plants. and it was finished by Aug 20 with the tents help. I'm trying some new (for me) categories to add to my report. Plant Stretch (PS) 1 to 5- 1 is hardly any stretch. Bud Mutation (BM) 1 to 5- 1 is a beautiful normal bud- 5 is big weird growths like foxtails. Trim- How easy or hard it was to trim up 1- you blow on the branch and hang it up. 5- Is very hard to trim takes a long time. About- Best guess on the THC % (I've been smoking a long time) Resin- 1 is super slippery 5- is very sticky like Gorilla Glue. Size of Buds (SOB) 1- is very small 5- is the biggest buds Dense- 1- is the lightest or fluffiest 5- is the rock hard buds your bud buster has trouble busting up. Plant #1 Wet Trim 1647 g PS. 3.5 BM 3.5 Trim 4 About 21% Resin 4 SoB 4 Dense 4 Finished Dry Weight 289.5 g or 10.33 oz. Plant #2 Wet trim 1606 g PS 3,5 BM 3.9 Trim 4 About 22% Resin 3 SoB 4.7 Dense 4.3 Finished Dry Weight- 302 g or 10.78 oz. Plant #3 Wet Trim 1635 g PS 3.7 BM 3 Trim 2.8 About 20% Resin 2.8 SoB 3.7 Dense 4.5 Finished Dry Weight- 314 g or 11.21 oz. Plant #4 Wet Trim 1753 g PS 2.5 BM 2.5 Trim 3 About 22% Resin 4 Falls off easily- Clumpy Dense 2.5 Final Dry Weight- 343.5 g or 12.26 oz. Plant #5- Wet Trim 1787 g PS 3.5 BM 3.7 Trim 3 About 24% Resin 2.5 Dense 2.5 Finished Dry Weight- 355.5 g or 12.69 oz. The taste is sweet and smooth to go down with a nice balanced buzz. There was some pests around. I found thrips damage in veg and got some Spinosad to take care of that. Saw some fungus gnats around but they didn't do much damage. Easy to grow and trim. This is a recommended strain. Chuck.

The girl is still growing tall and has started to bloom. He still has a lot of time ahead of him and it is a strong and healthy plant. 😊

As altas temperaturas arruinaram a colheita, as plantas estão sem cheiro a WW#1 foi a mais resistente ao calor, ainda exala um aroma muito bom, porem as outras plantas sofreram mais, a C99xBB#1 perdeu totalmente o cheiro, e nasceram novos pistilos diminuindo a densidade das flores.

Oh lovely looking plant. Straight up looks a Cali girl. Have a lot less Complicated grow this time with just tipping - kinda miss the trellis…but all good have too much work to do

Can’t wait to grow more from Barney’s farm loved this genetic

Se utilizó depper underground los primeros días de la semana para fortalecer la Ruiz de cada una de las plantas ya va en su día 5 por lo cual se utilizará top veg para estimular su crecimiento

Primer día en la superficie y ya asoman las primeras pequeñas hojas buscando luz, siempre prefiero dárselas de forma paulatina y gradual para que no sea tan brusco. Buenos humos! 👽