Windu WT
bbs42
@bbs42
Follow
Day 23, been QCing the buds and lots defoliation the past 2 days. Getting caked in Trich and some nice bright orange hair poping out. Added trimmed buds to mulch layer. No fan leaves in mulch
Orion F1 #1
Batmannsm
@Batmannsm
Follow
Last week with fertilizer, next week rinse with clear water, and cut at the end of the week 🌿🍁
shorts_status_processing
Barney’s Farms
Booom! Ya tenemos los cogollos formandose Farmers!! Ya casi no se nota la falta de magnesio por problema con el humidificador pero en breves ya empiezo lo buenoo!😜 mis favoritas las de Barneys Farms!!! espero que os guste farmers buen comienzo de semana!!💚
Slurricane Cut
Have to cut them early cause they're too crowded with colas, and there are risks for mold. Whole plant weight average at 750g /only flower 400-450g The total flower from 23 plants is 9.95kgs
RUNTZ
TB Strawberry Haze Auto - Terra Preta + water grow
Comfrey
@Comfrey
Follow
Die Ernte ist zwar lange her, aber ich wollte das Album noch abschließen. Leckere Blüten.
Gelato FastBuds
Gelato is finally putting in a very nice structure. Purple Lemonade has a bit of structure as it is currently but it is still developing the final bruches. It seems to promise well, here at TegridyCal we love the Gelato strain very much, we are waiting for the inflorescences with anxiety. Second top 4 main bruches and here too the power plant regrown and topped again.
LCG 4U&4Me
Black Jack Bagseed (Hermie)
I was out of town for a week so not too much to say in this update. They're coming up on 60F but have just barely started the fade so I'm thinking another 2 weeks or so from this point. Nothing but plain water from here until harvest.
Tangerine Splash Auto Sensi Seeds
Prof_Weed
@Prof_Weed
Follow
Wow, hat wieder 8 cm zugelegt und ist nun bei 100cm angelangt. Meine größte Autoflower bisher, und mein erstes Outdoor Tagebuch. Super gesund, trinkt nun satte 3 Liter am Tag bei der Hitze. Heute habe ich das Autopot System abgeschaltet damit ich einen leichten Dryback bekomme. Denn morgen gibt es einen veganen Kompost Tee Mix (Microlife+Profimix von Bionova). Der Ventilator geht ab und zu mal an, ebenso die Luftpumpe mit dem Autopot Airdome. Die Wurzeln sind mittlerweile durch die Autopot Wurzelsperre durchgewachsen. Dürfte aber kein Problem sein solange sie nicht das ganze Tray einnehmen. Hoffentlich wird es in den kommenden 4 , 5 Wochen nicht regnerisch und zu feucht im Gewächshaus. Sonst stelle ich sie eben ins indoor Zelt rein.... Ich will auf jeden Fall eine Ernte haben, Strom habe ich ja auf jeden Fall gespart. Danke an Chan von Sensi Seeds für die Samen, entwickelt sich prima trotz der Hitze.
Platnuim
16set Mainline - First Ever Grow & Daily Progressives c_0
All feeds with nutes use either a whole ratio, or combination, of "Veg Mix" and "Bloom Mix"concentrates. These are/will be DILUTED in water until a total ppm of add-in is reached using a (Total Dissolved Solids) TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added-in larger, then smaller, ratios while the "Bloom Mix" concentrate will eventually replace the "Veg Mix" concentrate entirely. The ppm and ratios will be listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 91/21 Replaced the small modified tomato ring with a full size 3 ring tomato support ring so I could support every branch. I made this decision on seeing a lot of my 90 degree breaks from yesterday as still mostly 90 degrees. I also removed the tape from around the split and placed a wire tie under that trunk to ensure it was secure. After that I also placed a tie on each cola split just past my breaks and another higher up as an upper support. VPD was great aagain today. 74F/55%RH/ Auto ILV but raised the fan setting from 4 to 5 so it didnt have run as long to get it back into range. PPFD was a bit off yesterday and today from all of the sudden changes, But I raised my lights today and returned the settings to 750 max and 550 lowest. This meant that I needed to move my fans as well. They are now on medium setting and all were checked for movement to as many branches as they can hit. Day 92/22 Watered for salt flush today. Used 3 gallons of purified water at 7.1ph water no additives. PPM was about 70 after ph'd. Ended up with ~ 1.25 gallons of runoff that showed 5.95 and 5.98ph on two meters. Top soil tested at 6.44, 6.63, 6.36, and 6.47ph for an avg of 6.475. Runoff also showed 1540 ppm VPD was controlled with having the door open for a few hours. Temps and humidity are 72F and about 50%RH with the door open, and about 75F and 55%RH with it closed. ILV still on auto fan setting 5. PPFD was adjusted to 820 max and 600 lowest - I used 1 hour total of IR at mainlight on/off with 15 minutes before and after switch. She got another 45 minutes of UV today as well. I plan to increase to 1 hour tomorrow. Day 93/23 Week 3 of flower and most all is well. I did however find some light burn. I say light burn because the only conditions that changed was 15 minutes more UVA today and the spots are on the leaves closest to the light. Feed yesterday was plain ph water and it improved both the topsoil and bottom runoff ph so I dont think it's a nute issue. My solution is to take control pics and reduce UVA back to 45 for another day or two to see if the condition persists or advances. Otherwise PPFD was about 820 down to 600. I used 1 hour of UV and 1 hour of IR at lights on/off Other than that it was a lazy football day while I just leave her alone. VPD was normal with humidity easy to control at 55%RH or less and temps ranging from 74-76F during the day and down to 66-68F at night. Day 94/24 Checked in on "light burn" control leaves and took pictures. My analysis is to reduce lights a little more so now max is 795ish. Went ahead with 45 minutes of UV light at mid day and 1 hr IR on the same standard I have been using. Fans still on medium and since I dont believe the spots are related, I plan to leave them on that setting. Overall I dont see much need to change anything at the moment with the spots not getting much worse or at least not that noticeable other than what has happened already and I already reduced the lights a little. If I can identify any more new spots today or tomorrow I will reduce by another 25ppfd. And if not, then the next day I will try 1 hour of UVA again. Temps and Humidity are controlled at the same 74-76F and 55%RH or lower. My plan is to keep RH that level throughout and possibly try to reduce again to as close to 45% as I can get. (edited) Day 95/25 Reviewed suspected light burn and didnt see any progression either yesterday or today against my control pics from the day before. So I went with running UVA for 1 hr at mid day again today. Still using 1 hr IR on the same standard I have been using. VPD was good today with same settings of 73-76F and 55% or lower RH. Day 96/26 No issues to report today. She still has what looks like light burn on the older upper leaves, but doesnt really look to be getting worse and the lights are not getting brighter by growth anymore so I plan to leave them where they are and back them down if I see it get more progressive. Conditions in the tent are the same as yesterday... like little to no vertical growth in two 2 days and no need to change anything. I 'do' adjust the ties daily to ensure they are not creating a pressure point. Most aren't even supporting anything and some are just pushing the cola back or out from others. PPFD is 800 max and lowest is about 580. I ran 1 hr UVA midday with the same 1 hr IR at 30/30 with main light schedule that I have been running. Temps steady. 73-76F in the day and 66-68F after lights out. RH% is 55 or less with the fan on auto. 97/27 Watering day. Started by testing /calibrating meters. Used 2.5 gallons of de-chlorinated tap water with starting ppm of 227, added ~700ppm of 100% Bloom Mix concentrate (actually 686ppm added) and ph balanced feed to ~7.0 tested on two meters. Fed until bottom drip began and got ~7cups in runoff after about 10 minutes of drain. Runoff produced 2 meter tests of 5.8ph with 1520ppm. Top soil was tested 4 times for an avg of 6.3752. Next feed will be sooner, thinking like in 4 days instead of 5 and I can adjust if she seems to dry out again. I'll be looking for ~1/2 gallon of runoff to estimate next feed from. Light burn doesnt seem to be getting any worse. UV lights are doing 1 hr a day, midday, for the rest of the week and then I will increase a little per day each week until harvest. IR is still doing the same settings until harvest as well. 1 hour with 15/15 before and after main light schedule and 1 hr total. VPD is controlled with no issues of temps or RH exceeding set limits. 73-76F and 65-68F overnight with no more than 55%RH while the ILV is set to auto.
shorts_status_processing
Italian 357 magnum by ghost farm seeds
Bonjour à tous les padawans et maîtres jedis Je tien a remercier chaleureusement ghostfarmseeds qui me fais l'honneur de vous présenter ses meilleures génétiques à autofloraisons. Je ne vous cache pas être très fier et impatient de cultiver cette souche J'aimerais aussi remercier @greenhousefeeding de me permettre de faire cette culture en m'offrant l'engrais nécessaire à ce run. Cette souche sera ma première autofloraison made in Italy Aujourd'hui nous y sommes enfin... Je rappelle que je cultive par passion et que le rendement n'est pas ma priorité et que je n'utilise que le strict minimum du matériel nécessaire à une culture correcte au prix le plus bas possible MATÉRIEL CONFIGURATION Box 80×80×160 Lampe led greenception GC4 250 watts Ventilateur à pince 15 watts Xiaomi Deerma humidificateurs 5L Hygrometre thermomètre Extracteur PROFAN 107 m3/h - 100 Prise programmable électronique ×2 Pot 11 litres Greenhouse feeding enhancer Cellmac nutriments Greenhouse feeding biobloom Greenhouse feeding biogrow Substrat cellmax bio ligthmix Fil de fer et pince coupante Microscope Petite balance de précision CULTURE ÉTAPE PAR ÉTAPE J'ai tout dabord fais tremper ma graine dans un petit verre d'eau pendant 12 heures dans le noir et je l'ai ensuite placé dans un Tupperware hermétiquement fermé entre de bouts de sopalin bien humidifié dans un endroit noir à environ 27 degrés celcus. Une fois la graine germé et d'une taille de 1 ou 2 centimètres je la prend délicatement et la dans son pot définitif de 2,5 litres Jour 1 léger arrosage (20 centilitres) avec eau ph6.3 à laquelle j'ajoute 4ml de rootboster cellmax et 3ml de cellmax bio 8-2-2 par litre d'eau Jour 3 arrosage avec un litre d'eau ph6.3 à laquelle j'ajoute 0.9 gramme de feeding enhancer de greenhouse
Automix DP + Nirvana
So now week 6 started 3 of them are in Flower Girls Scout Cookies still stressed from the Thrips All of them hadn't any nutes till now Because I added Floganic to the Biobizz Allmix Soil. Just tap water with a pH of 6,8. I think I gonna add nutes the next 10 days I will start with 30% Bio bizz grow and bloom and 100% Topmax. That's my second grow and my first one with topping and Fimming just want to learn all of the growingcircle. So that's all for this day 😁👍 Edit : Day 40 Criticals and GSC Day 37 Banana Blaze All of them looking very good My favorite is the crit 2 very good growing. 😍👌
Autoflower Power
Sorry for lack of updates this week. Just smooth sailing, watering when dry Day 108: About 10-15% amber trichomes. Day 109: Last day of light. Tomorrow will be the start of 48 hrs of darkness. I decided not to flush either plant this time. WW really blew up this last week!
Diablo’s Delight XL Auto
B4niTa
@B4niTa
Follow
Diablo’s Delight XL Auto sprouted and looks healthy. Running 20/4 light cycle from the start. Let’s see how this one turns out!🌱😈
"Sol" C#11
RAW GROW is a tested blend of all 12 RAW Soluble plant nutrients, essential elements and supplements. This blend has been proven to be an optimal all-in-one base “Grow” horticultural fertilizer. RAW GROW is used through out the entire vegetative stage. Derived from: Plant protein hydrolysate, mono potassium phosphate, potassium sulfate, cane molasses, sodium borate, copper sulfate, iron DTPA, magnesium sulfate, manganese sulfate, zinc sulfate and azomite. Also contains non-plant food ingredients: Humic acids derived from leonardite and peat, kelp (ascophyllum nodosum), silicon dioxide derived from diatomite and yucca extract. When you overlap a copper wire to attract ions, it is called ion exchange. Copper wire is often used as a material for ion exchange because it has a high affinity for positively charged ions, such as copper, zinc, and nickel. When copper wire is overlapped or wound into a coil, it creates a surface area that attracts ions and allows them to bind to the wire or gather within the space. This process is used in various applications, such as electroplating, water treatment, chemical separation processes and cultivation. Electrolysis is a chemical process that involves passing an electric current through a liquid or solution containing ions. This process causes the ions to migrate towards the electrodes, where they undergo a chemical reaction. In the context of plant growth, electrolysis is used to increase the availability of your nutrient-rich solution that can be used to feed plants. Electrolysis and nutrient rich reservoirs work well together since your cannabis nutrients are salt based. The process involves passing an electric current through a solution of water and plant nutrients, which causes the water molecules to break down into their constituent parts, hydrogen, and oxygen. The hydrogen ions (H+) then combine with the nutrients in the solution to form a nutrient-rich substance that can be absorbed by the plant roots easier. This will only work in a nutrient rich solution as it requires the salt-based nutrients to engage. This process, known as hydrolysis, provides the plant with a continuous supply of nutrients and oxygen, which can help to increase plant growth and improve yields. By providing the plant with a more efficient method of absorbing nutrients, electrolysis can help to increase the uptake of essential elements such as nitrogen, phosphorus, and potassium. Additionally, electrolysis can help to maintain the pH balance of the growing medium, which is essential for optimal plant growth. One of the key advantages of using electrolysis to increase plant growth is that it allows for greater control over the growing system. This is exactly why this is generally a technique reserved for advanced hydroponics growers. By adjusting the voltage and current levels, cultivators can custom control the nutrient concentration and pH level of the solution, ensuring that the plant receives the optimal amount of nutrients sitting perfectly on potential hydrogen spectrum. Carotenoids absorb light in the blue-green range of the visible spectrum, complementing chlorophyll's absorption in the red range. Carotenoids protect photosynthetic machinery from excess light. They deactivate singlet oxygen, which is a harmful oxidant formed during photosynthesis. Carotenoids quench triplet chlorophyll, which can be harmful to photosynthesis. Carotenoids scavenge reactive oxygen species (ROS), which can damage cell membranes and proteins. Carotenoid derivatives signal plant development and responses to environmental cues. Carotenoids provide precursors for the biosynthesis of phytohormones like abscisic acid (ABA) and strigolactones (SLs). Carotenoids are pigments that give fruits and vegetables their orange, red, and yellow colors. They also act as free radical scavengers to protect plants during photosynthesis. Beta-carotene is the most common provitamin A carotenoid. It's found in orange and yellow fruits and vegetables like carrots, sweet potatoes, and mangos. Other carotenoids include lycopene, lutein, and zeaxanthin. These carotenoids have antioxidant and photoprotective properties. In plants, Vitamin A is found as carotenoids, which are pigments that give plants their color. Vitamin A is a fat-soluble vitamin. Vitamin B plays a vital role in plant growth and development. It acts as a coenzyme in many metabolic reactions, which are the basis for plant growth and maintenance. Vitamin B helps plants metabolize nutrients, which are essential for growth and development. Vitamin B helps plants respond to biotic and abiotic stress. Vitamin B can help plants grow new roots, which can reduce transplant shock. Vitamin B can help plants grow shoots, especially slow-growing plants. Vitamin B1 Also known as thiamine diphosphate, vitamin B1 is a key component of metabolic pathways like glycolysis and the tricarboxylic acid cycle. Vitamin B3 Also known as nicotinamide or niacin, vitamin B3 is a biostimulant that can improve plant growth and yield. Vitamin B6 Vitamin B6 acts as an antioxidant and cofactor, and is involved in plant stress responses. Vitamin C, also known as ascorbic acid, is a vital nutrient for plants that helps with growth and protects them from excess light. Vitamin C acts as a redox buffer, which is important for regulating photosynthesis. Vitamin C helps enzymes that regulate photosynthesis, hormone production, and regenerating antioxidants. Vitamin C is a coenzyme in the xanthophyll cycle, which converts excess energy into heat. This process helps plants protect themselves from too much light. seedlings to young plants can feed on 200-400 PPM, Teenage plants that have a maturing root zone can feed on 350-550 PPM and adults will feed 600-1000 PPM. The more you feed plants and watch them grow you'll get a feel for how much to give them. Less is more when trying to grasp this. High level of CEC in organic soil so I'm watering 5-gallon
White (Widow) and Black (Sugar)
D71/F19 - 11.25 - Got them all defoliated. Everything is looking open, lots of light for the flowers, lots of room to grow and good airflow. I've got a couple co2 bags hanging in there too now. D75/F24 - 11.29 - Responded well to defoliation. Getting chunky! <3
Growing weed let's change the World
Growing88
@Growing88
Follow
For now I'm happy with the germination,Even the transplant in the organic coco hydro growth modules all right yesterday✌️🏿