Recommended
Likes
Comments
Share
@Dunk_Junk
Follow
Wow well she has absolutely shot up this week! She's grown 45cm!!!! But what I do notice is she has massive internodal spacing. Not sure if it's something I did wrong or what... She is growing well after her flush. All the new leaves do not have the spots on. They are solid green! Again, thanks for the heads up @BigDaddyK on that one!
Likes
51
Share
Cant wait till flush to see em purp OUT OR BLACK OUT 💜🖤🎩🌈🍬
Likes
77
Share
2/3/22: Watered with only aquarium water, no nutes. They are all getting very thirsty! Sherbert was dry and droopy yesterday so I watered her yesterday. I watered all other plants today, they seemed mildly dry/very slightly droopy - so I gave them between a ½-¾ of a gallon each. I'll have to keep a close eye on Sherbet she's very thirsty & she gets hangry easily! (hangry = droopy:)
Likes
25
Share
17/05/2020: ENG: talking about the gorillas, they are 81 and 82 days of LIFE. Let me know your opinions... SHOULD I START THE FLUSH (SHOWER AND THEN JUST WATER) OR SHULD I CONTINUE THE FEEDING ONE MORE WEEK ?? THE CRYSTALS STILL QUITE TRANSPARENT, BUT I DONT KNOW IF I SHOULD FLUSH AT THE MILKY POINT OR DO IT NOW BECAUSE IF NOT IT WILL BE TOO LATER... Despite of Lemon Haze , just let me know in the comments, I just want to give thanks to Luis from Eurogrow as he gifted me this seed when one of my gorillas dryed at the first stages (WEEK 2) ESP: respecto a las gorilas...ESTOY TO RALLAO. No se si hacer el lavado de raíces (meterla a la ducha y luego darle solo agua cuando la maceta se seque) o bien darle una semana mas de alimentación para que sigan engordando porque la verdad, no paran y los tricomas aun estan bastante transparentes. Pero tengo miedo de esperar al punto justo para hacer el lavado de raíces, porque se que despues del lavado deberé dejarla 10 dias mas aproximadamente... Respecto a la Lemon Haze , dejarme que opinais vosotros. yo solo tengo que dar las gracias a Luís de Eurogrow, ya que me regaló esta semilla al morir una de mis Gorilla Glue.. Gracias ;
Likes
141
Share
@Golden
Follow
Being away over the new years I was unable to tend to the ladies. However, we received an update from friend
Likes
7
Share
@Organic_G
Follow
Ein wunderbarer aber auch anstrengender Grow geht zu Ende. Erstes Mainlining, erste Photoperiodische im Zelt… Qualität, Resistenz, Geschmack 🤩super Habe bisher nur einen geraucht, THC hat mich gut weggehauen, hätte ich selbst nicht gedacht
Likes
73
Share
@Rwein93
Follow
Ciao ragazzi e bentornati qui per i nuovi aggiornamenti della Mimorange 🍊 Settimana fantastica!💪 Le sorelle all arancia mi sorpendono giorno per giorno. Oltre alla super altezza di 160 cm, ormai raggiunta da quasi tutte e tre, i buds sono sempre più grassi ora misurano 2,5 cm quelli secondari e le apicali 3/3,5 cm. Questa settimana si saranno allargati di 1 cm abbondante. Sbalorditivo😍 L odore è buonissimo. Un forte profumo dolce di mandarino pervade il naso appena apro il loro lato della tenda.🤤 Ho defogliato loro nel giorno 67 e ho allargato la numero 1 con un po di Lst nel giorno 70. I nuts rimangono invatiati.👍 Eh niente! Anche questa settimana è giunta al termine ragazzi.🤙 Grazie a tutti per aver guardato e restate sintonizzati per nuovi aggiornamenti.🙏 Buona settimana e felice crescita 🌱 🌱 🌱
Likes
9
Share
@Goltala
Follow
Week 3 Might have went a little over board with the training... LST'D FIMMED SCROGGED She seems to be showing signs of flowering already and that may be because she was in seedling for 2 weeks instead of just a few days or just 1 week so I may be behind 1 week in my diary... We shall see. I love the green on her, tells me she is enjoying her nitrogen and isn't starved.
Likes
26
Share
I really like the colors coming out in these buds. They are getting more purple every day. Looks like they are going to stack up pretty fat too. I spread the plants out a little this week so they get better light and air flow. Other than that I haven't done anything besides keep the reservoir full. Still pumping nutrients 1 minute on 20 minutes off. They are getting .5 tsp maxibloom per gallon. Not going to run any boosters this round. They dont look like they want or need it.
Processing
Likes
3
Share
@camo420
Follow
NEW BOX: 130x60x120 DIY: storage shelf, solid sheet metal ELECTRO ################################ thermometer top thermometer bottom hydrometer wlan ip cam (+ir filter) ---------------------------------------------------------------- input: x2 USB PC fan exhaust: x2 USB PC fan circulation: x2 USB fan ---------------------------------------------------------------- led panel 1: 300W ASUNDOM LED (Veg/Bloom/Full) led panel 2: 300W XHGrow Reflector-Series LED (Full) ---------------------------------------------------------------- studio light 1 (vegetation): 36W TaoTronics LED Gold studio light 1 (vegetation): 50W Balai LED full studio light 2 (vegetation): 8W VINGO LED blue ligh studio light 2 (vegetation): 50W Balai LED full ---------------------------------------------------------------- studio light 1 (bloom): 36W TaoTronics LED Green studio light 1 (bloom): 36W TaoTronics LED Gold studio light 1 (bloom): 50W JADIDIS LED IR full studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W TaoTronics LED Green studio light 2 (bloom): 36W KINGBO LED Deep red 660nm 3x PLANTS ############################### FastBuds Girl Scout Cookies pots: 14L soil: plagron grow mix
Likes
7
Share
4/8 - They are doing great. PPFD at 800. Debating if I want to do CO2 this grow, because I could easily get 1000 PPFD out of this light. That means adding a dehumidifier to keep a sealed environment, but don't think there's enough of a cost benefit. Might just add more far red at lights on and lights off to try and get a little more vegetative stretch before I switch over to 12/12. Clock is ticking. Mother-in-law shows up 6/15, and I'll want it chopped by then. 4/8 - on further calculation, I'm switching to flower today. Never switched this early before, but we'll see how it goes, eh? 4/9 - prepping for vacation. Bought new 10 gal Roughneck storage container, mixed new nute mix 2:1:2. EC 1.40 with 0.3 tap water. 11ml of pH down to get PH from 6.4 to 5.8. Ditching the auto fill. Too high risk for flooding without flare fittings. Don't trust cheap-ass quick connect push fittings. 4/10 - turned off "seedling vpd mode" which kept humidity artificially high. Turned on 2nd bank of LED lights, so system is pulling about 370W with lights on, still significantly dimmed down. Turned on light cooling circ fan, which is a sealed aluminum labyrinth tied to two 4"vents. Although, almost all the heat this lamp generates is from radiation, not thermal loss of the LEDs, so the heat sink is barely warm. Lights up to 16" over canopy to allow growth while on vacation. Ppfd at canopy 800. Room temp 81, humidity 73. Auto water time is 30 sec per pot.
Likes
92
Share
Week 7 Veg Report 🌿✨ Hey Grow Fam! 🌱 Week 7 of veg is here, and let me tell you, the grow room is buzzing with life! Each of the girls is showing off her unique personality, and I’m especially stoked about the Papaya Zoap—she’s really coming into her own! The scrog net is nearly filled out just how I wanted it, and I can feel we’re so close to flipping to flower. The anticipation is real! 😁 But before we get to flowering, let’s take a dive into something that makes this grow so smooth—ThinkGrow LED drivers and cables. ThinkGrow LED Drivers – Plugging Into Success 💡🔗 This week, I had a chance to work deeper with the ThinkGrow LED system, and honestly, it’s like a dream come true for efficiency. I’ve been using the TLD-4 Four Spectrum Control Channels Model One LED Driver, and let me break down how it works. The drivers attach directly to the bars—super sleek and no extra bulk. And, the connections? It’s a matter of matching the male and female connectors on the TDC-2 Daisy Chain Cord. It’s like a simple puzzle that snaps together perfectly. The TDC-4 cord takes it to the next level, connecting the top bars to the ICL-300 Inner-Canopy LED Bar, giving complete control and balance across every layer of my canopy. Why is this important? The driver-to-bar connection ensures that each LED bar is operating optimally, and the daisy-chain system makes it effortless to manage multiple bars without a ton of wires everywhere. It’s neat, efficient, and delivers even light distribution, which my plants are loving! 🌞 Are My Girls Ready for Flower? 🌸 When I look at the plants up close, it’s like they’re whispering, “Flip me to flower already!” 😆 Their growth has been so vigorous, each filling out the space with character, and that scrog net is almost fully covered. So, I’m thinking we’re super close to the big switch. Each plant has its own pace, but as a whole, the grow is looking fantastic! Room Stats – Tuning Into the Environment 🌡️ The TrolMaster system is still killing it with data and control, making it easier for me to keep everything balanced. Here’s a quick breakdown of the week’s environmental numbers, and a few jokes along the way! 😜 • Room Temps: Max 25.5°C | Min 24.4°C (Keeping it cool but not too chill!) • RH: Max 76.4% | Min 67.1% (Humidity stays right where it needs to be.) • CO2: Max 832 ppm | Min 420 ppm (Shout out to that magical 420! 🌬️😂) • VPD: Max 1.06 kPa | Min 0.64 kPa (All dialed in for peak veg mode.) Light Levels – All in the Details 💡 • Max PPFD: 506 | Min 0 (because, you know, when the lights are off, it’s dark! 🌚😆) Keeping the light intensity balanced, and using the ThinkGrow LED system to spread that goodness across the entire canopy, I’m seeing explosive growth. Those PPFD levels are perfect for this stage! Water & Nutrients – The Lifeline 💧 • Solution pH: Max 6.32 | Min 5.78 (Keeping it in the perfect range.) • TDS: 355 ppm steady (Every drop counts, right?) • Solution Temp: Max 23.5°C | Min 22.3°C (Keeping things cool, just like the grow!) And medium moisture? It’s a solid 100% thanks to my AutoPots and the genius of the AquaValve system. No electricity needed—just gravity doing its magic. It makes my life so much easier, and the girls are loving the consistent hydration! No more worrying about under- or over-watering. Why I’m Obsessed with TrolMaster 📱 I can’t talk about this grow without shouting out the TrolMaster system. Every bit of data—whether it’s temperature, RH, VPD, CO2, light intensity, or pH—gets tracked and displayed in real-time on my app. It’s like having a grow assistant in my pocket, making sure I can monitor and adjust at any moment. The level of control I get with TrolMaster is out of this world, and it’s helping me keep everything dialed in perfectly. Ready to Flip Soon 🌸 With the Papaya Zoap filling out so nicely and the rest of the plants following suit, I feel like we’re right on the edge of flipping to flower. It’s going to be a smooth transition, and I can’t wait to see these beauties bloom! Stay tuned for next week, where we might just make that flip! 😉 Environment Stats Recap 📊 • Room Temp: Max 25.5°C | Min 24.4°C • RH: Max 76.4% | Min 67.1% • CO2: Max 832 ppm | Min 420 ppm (Seriously, shoutout to 420 again! 😂) • VPD: Max 1.06 kPa | Min 0.64 kPa • Light PPFD: Max 506 | Min 0 (obviously, when the lights are off! 😜) • Solution pH: Max 6.32 | Min 5.78 • Solution Temp: Max 23.5°C | Min 22.3°C • Medium TDS: Max 430 | Min 420 (I can’t get enough of these 420 jokes! 😆) Final Thoughts 💚 This week has been a blast! Between the ThinkGrow LED system and the TrolMaster gear, I feel like I’m pushing the limits of what’s possible in indoor horticulture. Everything is dialed in, the plants are healthy, and the data just keeps showing that we’re right on track. Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
52
Share
@Any_Zenin
Follow
Tag 50: Gegossen 15% Topfvolumen, Wasser PH 6.5 + 1ml/L CalMag + 1g/L Green House Feeding Bio Enhancer = 2..7L NL pro Topf, anschließend noch einige Blätter entfernt. Tag 51: Nur ein paar Triebe und große Blätter runter gebogen. Der Duft wird intensiver und die Pflanzen haben ordentlich Wachstum was Größe und Blattmasse angeht. Gestern habe ich 2 Cannatrol bestellt ich hoffe die kommen bis zur Ernte an. Tag 52: Gegossen heute aus Zeitmangel nur 1,7L NL pro Topf, Wasser PH 6.5 + 1ml/L CalMag. Tag 53: Heute alle Pflanzen in ruhe gelassen. Tag 54: Gegossen wieder nur 1,7L NL pro Topf, Wasser PH6.5 + 1ml/L CalMag. Tag 55: Es kam heute ein neues Flexi Tray von Nutriculture an 1.50m x 1.50m damit konnte ich mein zu kleines Tray ersetzen und alle Pflanzen haben wieder genug platz. Tag 56: Blütetag 20, alle Pflanzen haben heute ihr Lollipopping bekommen und wurden zusätzlich im oberen Teil ein wenig entlaubt, dazu habe ich noch einige LST Drähte umgesetzt. Anschließend wurden alle Töpfe mit 1.7L NL gegossen, Wasser PH 6.5 + 1ml/L CalMag. Eine ganz gute Woche das einzige was ich nicht komplett weg kriege ist der meiner Meinung nach durchgehend vorhandene CalMag Mangel, vllt liegt es auch an der BioBizz Erde beim nächsten Run werde ich definitiv eine andere benutzen.
Likes
7
Share
@Messypies
Follow
With the majority of trichomes now turned milky with some turning Amber, i have decided to begin a 10 day flush using nothing but ph balanced water. Doing a shorter than normal flush as the plants with deficiencies don't have much nutes to use up.
Likes
4
Share
DAY 4 In flowering for This big bushy pheno gelato 41 Feed compost tea & SST tea Only no bottles no Nutes
Likes
57
Share
@GreenISR
Follow
10.1.19 day 1 Wow that was fast for the sex sight . 11.1.19 day 2 Fix the lst for even spred . 12.1.19 day 3 The smell is amazing and the big leaf's AF . 14.1.19 day 5 Some purple color apear . 15.1.19 day 6 Did some leafs remove . 16.1.19 day 7 end of the week What a grate week ,starting to get some buds 😇😇😇found that im not giving much water as she needs .
Likes
15
Share
How do you produce electricity with living plants? By using the natural processes that already occur. In short: the plant produces organic matter via photosynthesis. Only part of this organic matter is then used for its own growth. The rest (40% of carbon capture) is excreted via the roots. Around the roots, bacteria feed on the organic matter and they release electrons. If you’re able to harvest the electrons into an electrode, you can couple the first electrode to a counter-electrode and build an electrical circuit, like in a battery. The electrons flow back into the natural system via the counter-electrode, so it’s completely circular. 0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Magnesium (Mg) is a chemical element classified as a light, silvery-white, alkaline earth metal, and it is the lightest structural metal. Magnesium is a central component of the chlorophyll molecule, the pigment responsible for the green color in plants and vital for photosynthesis, where plants convert light energy into chemical energy. The photoelectric effect of 285 nanometers (nm) ultraviolet (UV) light on a metal surface causes electrons to be ejected with a maximum kinetic energy of 1.40 electron volts (eV). *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond. A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. The optimal pH for nitrification is between 7.5 and 8.6. Nitrification is the process of oxidizing ammonia to nitrate and nitrite.
Likes
10
Share
Likes
Comments
Share
@qhartman
Follow
I’m guessing about 3 more weeks left on her.
Likes
21
Share
Hey..next week the plant get the 35liter pot with same mix as the start pot...i add little helper seeds in the big pot to prevent some things like bugs and dry out to much from wind and sun....hope the sun gets brighter the next time...but for this hard conditions i would say..nice start. thanks ..... 4/25: It was extremely cold tonight, so I took the opportunity and took this time lapse shot over 3 hours... after 1 hour I added a drop of remaining osmosis water... and lo and behold, ten minutes later Calimero laid down his eggshell ... .now we can get started and I have that great shot that I've always wanted to take...sorry for the outside interruption, I couldn't miss it....in the evining after my work i kick her as instant out.....