The Grow Awards 2026 🏆
Likes
Comments
Share
End of week 9 flush week, cut the blueberry ladies and put them in the mesh drying rack. Will update in 2 weeks with first smoke and dry weight, assuming she's dry in 2 weeks. Flush week for the Super Lemon Haze, she'll get chopped this coming Sunday.
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
14
Share
Growing how it is growing. Grows great outdoors. Still smells like coconut and strawberries. Haven't been adding anymore fertilizers just letting it grow naturally.
Likes
14
Share
Avertissement de chaleur tout la semaine avec de température autour de 42 en après midi et 30 la nuit . Humidité très élevée
Likes
74
Share
I am giving half strength nutes every 3 waterings...they are all getting different doses because they are all at different stages...I will be getting a bigger and better light after this grow...I am a first time grower I could have made this 3 different grows I guess...However I would like to make this diary strictly for the purposes of showing the results from a newbie growing BOMB SEEDS with a whole lot of love and care and very little knowledge...I am thinking about cloning the Bubble Bomb and plan on letting her get super big before I switch her light schedule...I got my BOMB SEEDS directly from them not a seedbank...They deserve the credit for anything good going on here...like the fact that my side branching has side braches that side branch...Its all Bomb Seeds genetics and as far as I can tell they seem to be BULLETPROOF!!!!
Processing
Likes
29
Share
Bit of a difficult start to these girls seeing as this is my first grow and all, but they’re still growing and overall looking pretty healthy, good colour, springy, but I’m suspecting nute deficiency maybe but I’ve upped the food so we’ll see how we do! Now, when to start topping 🤔... Puff, puff, pass ✌️
Likes
110
Share
ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Primera semana de floracion, las ramas laterales han comenzado a estirar y se muestran las primeras preflores, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁 📅 Dia 21: Descanso 📅 Dia 22: Riego con nutrientes EC 400, esta Titan F1 crece por momentos, creo que voy a tener que sacar una del armario porque no van a entrar, me falta espacio 😡 para ver el desarrollo de esta genetica, la proxima vez van a ir en macetas de 17litros. 📅 Dia 23: Descanso, se pueden apreciar cambios notables cada 24 horas, va como un cohete 🚀 📅 Dia 24: Riego con nutrientes EC 350 📅 Dia 25: Descanso 📅 Dia 26: Riego con nutrientes EC 350 📅 Dia 27: Descanso, paso una al armario 12/12, no hay sitio para las dos en este armario. MARSHYDRO necesito algo mas big!!! 😁
Likes
10
Share
@SgtDoofy
Follow
2/20: Both pots are light and are looking droopy. Time for first day of feeding nutrients. I used 1tbsp unsulphured molasses mixed into a half strength mix of General Organics GO Box nutrients, following the first week of flower instructions. 2/21: Both plants are looking great this morning. Amnesia seemed to have grown more overnight! I'll need to watch the timelapse to see what happened. My lights are at about 80% at 12 inches above the plants. I'm going to increase it to 12 inches above the tallest cola. 2/22: May turn both lights to 100% soon, as the timelapse of the night didn't show much growth or movement. Otherwise looking good. 2/24: Woke up to Amnesia's lower leaves turning yellow, brown, and crunchy. Google research thinks its a PK deficiency, the last two letters if the N-P-K nutrient list. Discord users also believed it was a PK deficiency on their own accord. I may be able to remedy this by upping my main Biothrive Bloom to full strength to increase those nutrient numbers, and feeding her now. She's growing fast, I could see why she'd be hungry again after 4 days. Her pot wasn't quite all the way light before bed though. After today's feeding I'll go down to 3/4 strength on the Bloom for the next feeding. EDIT: After lifting Amnesias pot, she definitely is ready for feeding/watering. Probably starved a bit overnight in the hot tent. Later at night, Trainwreck began to droop, so I mixed up a half strength of nutrients and fed her a gallon over a half hour.
Likes
11
Share
@Jacks_Pot
Follow
This week went without any problems. They're on scedule and next week I'll repot them. I'm gonna keep 4 out of 5 because I have only room for 4 plants in 15 liter airpots. On day 12 I removed the seedling that was making the least progress. It gave me the opportunity to check the roots and they looked fine. I'll guess it will be the same with the other seedlings. I've already filled the airpots and placed them in the tent so they can heat up a bit. There's a large heating mat (RootIt 40 x 120 cm/ 15.7 x 47.2 inch) underneath the pots to keep the substrate at 21 – 22 °C (69.8 – 71.6 °F) I've given them 70 ml ph-adjusted tapwater + Plagron nutrients( amounts see above) each once this week. Once a day I spray them with a solution of CannaCure and tapwater (15ml + 150ml tapwater, ph level = 6.1) The cobs are at 68 watt with a distance of 49cm (19.2 inches) from the Pineapple Chunks giving a DLI of 19. Temperatures fluctuated between 21.7 – 24.2 °C (71 – 75.5 °F) and humidity between 51 – 94 % I've turned on the Airfan and the fan-controller is set at 30-35%. Up to next week! 🤘 Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈
Likes
52
Share
Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
5
Share
Started to train this girl now that she got her branches She got really tall and has me excited for my first purple haze harvest. I am loving her progress, knowing I stripped her so much in the past.
Likes
8
Share
È stata una settimana bellissima e calda. Tutte le varietà sono vicine alla fase finale della fioritura e ognuna ha il suo forte aroma particolare. Tutte quasi piene di infiorescenze dure e molto appiccicose ormai stanno completando il loro processo di fioritura in maniera impeccabile. Come sempre queste varietà dutchfem seeds autofiorenti sono una soddisfazione! Alcune sono di tipo XXL mentre altre di taglia media ma sono tutte piene di infiorescenze e continuano a riempirsi quindi verrà applicata una raccolta graduale tra una settimana o due al massimo. Sparito ogni insetto nelle piante a causa della resina appiccicosa. Sono felice un abbraccio a tutti.
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
38
Share
Very happy with the yield which was close to a gram per watt used with a quite low yielding strain and that was with a very very close trim job. Could easily have been a gram a watt had I not trimmed it for a top shelf look. Quality was as usual 10/10 with runtz muffin which I have come to expect. Such amazing phenos to be found.
Likes
7
Share
I think its going quite good with the purple punches, its week 5 already so we continue to provide some extra PK until the end of next week, the smell is great, very fruity 😁
Processing
Likes
13
Share
@William38
Follow
This week was good plant looks better add root farm bloom 10 ml....what went wrong well making video I snapped a branch off 🤔...tryed honey to try and root it seen on YouTube some guy did it so I tryed need to get clone x or something like that any ideas???
Likes
31
Share
@RFarm21
Follow
Olá growmies! Fiz um pequeno desfolhamento das folhas que tiveram contacto com o solo.
Likes
14
Share
I top dressed with worm castings and Dr. Earth’s Flower Girl. Also, the reservoirs in my DWCs got a water change to switch to transition stage nutrients.Growth is really accelerating.
Likes
26
Share
@Dunk_Junk
Follow
20cm of growth this week! That is 8"!!!!! She seems happy.
Likes
3
Share