She is much prettier than she was a week ago :) I remembered that I have my first grow light, which is more compact and it will give me more space, so I changed my light, now the girl's side branches get light too:) I add a lot of video memes, because I really want to win Iphone16 pro ;) and those who don't take risks don't drink champagne:) good luck to everyone.

Day 114. Gorilla Max is totally ready, maybe she would bulk up, but last white pistil went brown at least a week ago. Time to trim. Bud not solid, but kinda hard, bottom all airy and small, but she smells and sticky like hell, so fruity ... Had to chop her, because got tiered of seeds everywhere, so cleaned my draws and fridge, from 45 found bag seeds started new diary, had to make space for them. Want to try out 12/12 from start and even if i would leave them under natural sun , they would stretch too much in first stage of grow and would repeat that grow patern indoors. Scissors hash was nice, super soft, hard to roll, all stays on hands. On this plant found two seeds, maybe some hidden in colas, but its not even close to bad that i was imagining at the beginning. My watering damage is obvious, Gorilla Max and Bunny were best plants, now - they are smallest... Last weeks very important, till week 5 of flower and that incident they were leaders, overdrying don't work . Hope i will learn this lesson. Day 120. Last 3 girls are down. Gorilla Max - 88 g. Of dry bud. Think she and Bunny will be smallest of them all. Buds are airy, but very sticky and all calaxies went pink. So in spliff it looks really funky. Needed to lolitop them higher, maybe overall look and cola structure would be better then. Lanky Gorilla is a champ, no doubt. Think this girl should beat 4 ounces easy. Day 126. So total of all 4 plants is 401. A bit less than was hoping, but target achieved. Update will follow.

I hate growdiaries resizing😡 uploaded in 108Mp foto and 4k60fps video

Hi guys I hope your all good, So its been a mad week! Had to have a switch around. So the mimosa sherberts have been a nightmare but I think I got them back on track, there a good few weeks behind now. Gelato cakes are doing brilliant! Frosting up lovely and smell amazing, I reckon 4 weeks max left on these 2 autos, then its waiting on the sherbert mimosa to show me some nice buds. I have 1 blue cheese fem and 2 x dark phoenix vegging in there now. I will repot them when the autos are all done and finished. Happy growing guys 👌💪💚 Hi guys I just got around to defoliating and tieing back down the sherbert mimosas, its looking like each node is a 40cm long main, I cant wait for these to start producing now. Happy growing guys.

Nothing to say just i love it 😍 🍒🇺🇲

Day 16-27/12/21 doing well!!! Day 20-31/12/21 plant is looking good!!!! Waiting to move half of them to another tent!!!!

Really the usuals, clean her up and tie her down :) I did add a WiFi controlled watering system for when I go out of town tho, so that was nice! She is quite the shrub 15” tall and 40” wide >.< the trunk is approaching 1.75” diameter :)

Day 8 leaves a little burnt from the temp being slightly too high but increased airflow has solved the issue and newer leaves look healthy. Will do some LST at the end of this week. Day 9 there's a few spots on the newer leaves either from the heat or maybe a bit of nute burn from the all mix. Either way it's doing well and seems to have carried on with its none stop growth. Got a small single plant tent on the way as the chest of drawers won't be good for much longer so that should definitely solve the heat issue while also being much more reflective. Day 10 shot up again overnight. The biobizz must definitely be doing it's thing now as the stalk has doubled in thickness and there's been plenty of new leaf growth. I have also been doing a few light pre bends to prepare the plant for the first LST in a few days time. Day 11 the tent has arrived so I've put it together. Already looking loads better. The plant itself has sprung a lot of new growth overnight so hopefully now with better reflected light and less heat it should thrive. Day 12 Biobizz sample pack arrived today so I have mixed 1ml Bio-grow with 1L water and fed the plant approx 2/3 of the mix due to the pot being pretty dry throughout. I was overwatering so left it for a few days until adequately dry but not overly. Waiting on advice from Fastbuds but will not feed again until next week anyway. I have also lifted the light up to 60cm from the top of the plant to prevent any potential light burn. Day 13 plant looks good. Still minor curling on some of the leaves but newer leaves look healthy. Spoke to Fastbuds on Instagram and I have fed too much as I should have started with 0.3ml to a litre so will keep an eye out for signs of toxicity. Day 14 I think the overfeeding is showing but not drastically. There's a few spots on the leaves but not anything to worry about. I'll just monitor it over the next few days.

Just feeding it at the moment. Still not to sure if it's male or female yet. She is female 😁.

Hey gang update on the new girls!!!! So they are definite differences in the girls genetics I can tell just by this growth so far, The Tricross is a bit thinner on the fan leaves and a bit more lanky or taller. Whereas the Muchacha F5 is shorter and has wider fan leaves, so this will Most Def be a interesting grow, I'm excited to see if i can make this a much better grow then the last run. I will be using the FOOP nutrient line i picked up to see how the girls fare with is, but i wont start that until maybe week 5 or 6 depending on how the progress is at that point, thanks guys! will keep y:all posted!!!!

june 16. 4th megacrop feed.1 gr/litre. Ph 7.05 june 20. Megacrop feed number 5. 1gr/litre. ph 5.85. Started LST. Check cool timelapse.

Great week. Girls finishing up and taking longer to drink. Checked trichomes and this plant is ready with mostly cloudy and a spattering of amber. Will harvest tomorrow morning and will provide weights and measures after harvest. Will dry in tent without light and offset circulation. Will keep tent naturally at 67 degrees. I will need to assist with humidifier to get humidity to around 60 RH. Perhaps a wicking cloth in a bucket? Just thinking out options. Update: Cut down the girls and hang them up to dry. Great thick hard buds. Can't wait to see what they smoke like, but it is going to take time to dry. Thanks to everyone that helped to make this a successful harvest. I will weigh the harvest before starting cure after a closer trim.

This week went real great , one has been getting flushed and the rest we will start flush Tomorrow! These ladies are doin so amazing! Hope you all enjoy !! Stay tuned for next week! Cheers an happy holidays!

💩Holy Crap Growmies We Are Back💩 Code Name FBT2309 Well growmies we are at 35 days in and everything is going great 👌 👉 So the low stress training👈 has been going great she's gonna be a big girl, shes in full flowering mode so let the stretch begin 👌 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

I think it was just one of those things with this plant. It maybe could have benefited with a different positioning below the light. The smell is good very strong blueberry/floral hum. I’m guessing the taste is quite similar, I’ll come back to this when it’s been tried.😬 The hash is a great smoke, a good flavour smell and a very heavy stone. I was suffering from quite a bad toothache after smoking this sleeping wasn’t a problem, the pain was controlled very well by it.✌️

Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ THE END: - After 14 Day of drying with around 15-16°C and 60% rh its finally time - LETS TRIM - beautiful woody kush smell while trimming - bud full of Trichs all over (shinning like diamonds) - 1/3 Phenos Ive didn't catched up that good with calmag had pushed out their Sugar out of the Buds. Really beautiful to see - never saw this before - really rare to see! - Curring them in Grove TerpLoc Bags - Watch out for my upcoming smoke review! Thank you for staying with me - This wonderful Journey finally come to an end. Next run is waiting already 💚 ___________________________________________ --- 🌱 Strain --- 🏷️ OG KUSH by Barney's Farm https://www.barneysfarm.com/og-kush-646 ---💡 Lighting --- 💡LUMATEK ZEUS PRO 600 https://lumatek-lighting.com/zeus-600w-pro-29/ --- 🥗 Nutrients and Feeding * 🍸 PLAGRON Algae Baseline grow/bloom + Additives: Power Roots, Sugar Royal, Pure Enzym, Silic Rock, Power Buds, Green Sensation * 📅💪 baseline grow/bloow: 4ml/l & additives: 1ml/l each https://plagron.com/de/hobby/produkte --- 🏭 Grow Setup --- * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) & Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! don't forget to check out my Instagram: budboutiquee - Bud Boutiqe