Likes
Comments
Share
@Ninjabuds
Follow
My Soaptini plant is still on the smaller side, but it's finally starting to take off. I think it's going to stay pretty short and stocky, which will be interesting to see. It's been a challenging week with the constant rain and ridiculously high humidity. Keeping things dry indoors has been a real struggle. Despite the weather, I managed to flip all my feminized photoperiod plants to flower this week. I'm hoping the switch will go smoothly, but with this humidity, it's going to be tough.
Likes
13
Share
Ive been topping up with ro water since last weeks nutrient swap, which had gradually brought down the ppms from about 800 to 500. I pumped out the tank at the start of this week and replaced with ro water and final solution. Had to adjust the ph twice during the week and topped up with some more water. Planning on leaving the lights on for a couple more days then into darkness for 2-3 days and chop these ladies down. Flush seems to have gone well and can see the plants canabilising their leaves for the remaining nutrients
Likes
2
Share
Day 70, week 4 bloom Upgraded from SF1000 to SF2000 pro.
Likes
4
Share
repottet the plants in to their final 11L Fabric Pot with bio bizz All Mix. I put them more on the side of the pots, so that i can bend them over with LST and get an even canopy
Likes
1
Share
@Smokwiri
Follow
Welcome to my watermelon Zkittles diary. Grows good, first round of abandoning oldest leaves had initiated. Development is satisfactory... Use code RUFFSELEKTAH at Mars Hydro store checkout...
Processing
Likes
24
Share
Hi everyone 🤗. They continued to develop well this week 👍. Slowly they stop growing and put their energy into flower production. So that this energy is not wasted, the lowest shoots on which only popcorn buds grow anyway have been removed. Next week the new update will follow as usual, stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3
Processing
Likes
5
Share
i recommend everyone to go give @superautoseeds (auto seed) a try. i promise ya wont get dissapointed
Likes
12
Share
A little nute burn. Dialing back a bit, but she is still getting frosty.
Likes
49
Share
@Ferenc
Follow
Day 15 - 4/10/21: Welcome to the first day of the 3rd week.... All good it is a lovely group ;) Very lovely. Let's see then what changes happened since last week: Lamp is set to be on 150W approx 60% of the full power..... enough..... they love this ViparSpectra XS2000.... So Do I..... Himidity stays on approx 60% Ventilation is fine every 2 hours switched on for 5 min.... Watering like 0.06 l per day.... Started some fertilization also with Bat Guano, Biobizz family /before someone ask why I use BioBloom and Top Max in veg just beacuse lol/ And... Epsom salt.... Ratio can be found just scroll down.... And yes, I do it on Tuesday and Saturday except the Epsom just 1x a week the rest then 2x for now. All of them are beautiful and the first LST has been done basically just bent them to the right or left haha for now except Afghani Gold and Spliffs Strawberry because they are basically just 2 weeks old so too young to be trained. I assume Blue Berry has a little funny deficiency but I am sure she will be okay anyways I will colour her back lol with some magic nutrition 🤣🤣🤣 As you can see 2 of them are smaller /Afghani Gold, Spliffs Strawberry/ because they are younger: planted 1 week later as the first germination failed. Pictures sYs everything so not much more to say... ;)
Likes
28
Share
5/11 - Started the "flush" this week! Making it as easy as possible on myself and just using straight tap water to fill the res', and guess what?! I installed the new AC Infinity 6" in-line fan, and it's finally allowing me to keep the tent closed while maintaining an optimal environment. Smell begone!...until I open the tent, that is. The tester nug I clipped from the other week is losing the hay smell, and looking like the frostiest bud I've ever seen. Everything is looking like a 5/16 harvest! Do I seem excited?! I am!! I'll add some pics later today when the lighting is better. Funny how I now have the optimal setup with only a week left to go. Excited to utilize it for the next round though! 5/16 - Y'ALL!!....Y'ALL!!!!!! Attention, please! I have a very important announcement. It is time for Helen to go on to the next life. To commemorate this historic and paramount moment, I am uploading my first video and some amazing (iPhone) pictures (if I do say so myself). As a first-time grower, but loooooonng time cannabis enthusiast/consumer, I still cannot believe I grew this amazing plant. In fact, I am now writing this entry after having vaped part of the tester bud, and let me tell you, I almost cried tears of happiness after the high sank in -- it's phenomenal. The taste has a hint of lemon, lime, earthiness, dominant pine, with a menthol exhale. The effect is very cerebral (as expected for an early harvest), but relaxing. I feel a wave of calmness flow down my body and a nice pressure around my eyes and sinus (which is usually stuffed). I hope she doesn't mind me sharing, but I thought it was touching (and humorous) that my gf legitimately started crying when I told her it was Helen's time. It's ok, she will be remembered and honored over the next several months, and ages to come. ---- Thanks for following 🤙 Always appreciative of tips or suggestions
Likes
42
Share
@MrJoint
Follow
✌️🎃 Thank you for checking my cultivation. 😍 She's fatter every day.
Likes
9
Share
@Eryan
Follow
Last week transplanted the plants to their final containers. Approx 12L and 17L fabric pots. Did my best to transplant without disturbing the roots, by first placing the small container in the new container to make an hole in the dirt. And then cutting apart the small container instead of pulling out the plant. Then just fitting the root-ball into the already made hole. Root development looked pretty good when I did the transplant. Transplanted into a rather well-fertilized soil. Don't plan on fertilizing these plants during the whole grow unless I otherwise see a reason to. Also started LST last week, bending the plants somewhat extreme, but they're taking it just fine. Water here is rather alkaline, so I'm starting to control the PH of the water now. There's a clear skunk smell that started last week as well, but only when the tent has been opened. Still, it doesn't take much time to notice if you stick your head in the tent. And this is already starting in Week 2 of veg! So the charcoal filter is set up. Pretty happy with the development so far, although I've still been seeing some thrips. If they're not completely gone by next week, might end up mixing some of the spinosad into the water so the plants absorb it. Day 16 - Cut off one of the lower fan leaves on both plants. It was blocking the other nodes from receiving much light. I am already able to start noticing mandarin/tangerine undertones in the smell when I've handled the plants.
Likes
23
Share
@Mutschel
Follow
07.09.2024 Erntezeit! Ich werde weiter berichten. 31.10 letztes Update mit den Videos.
Likes
13
Share
@russrahl
Follow
End of week 4 and things are still moving along despite a few hiccups. Ended up over feeding them at the end of last week and this week we have dropped there ppm down to the 450 ppm mark untill they come around. Didn’t really do to much damage except burn my leaves a bit and maybe slowed there growth a bit this week. Got a laser temperature gun for another project and I’m now able to check my canopy temperature too and it’s great. Canopy sits around 24-25 in the center of the screen and between 21-23 on the rest. Got around 65 D.L.I on the canopy's tallest area in the Center of the screen directly under the light when it passes over. The 1000w HPS is on the rail mover so it’s keeping things from burning and getting too intense. I recently added 2 x 1000x(180w actual) LED “Blurple” lights I had kicking around not been used so I through them in the tent to add some different light spectrums that the HPS doesn’t have. Just a little added extra kick for them, why not rite?...lol been struggling to keep humidity up across all my tents really, got the bare minimum everywhere and only one 1gal humidifier to run in the big room. Temperatures were cold the last week outside in the -20c range so my basement was a bit cold despite the one baseboard heater, which makes things even drier! Lol There has been no need to use either of my air conditioners in my tents for a month or so now even with the 2 x 1000w HPS lights in tents running side x side in the same room. Which is good cause they also drastically drop my humidity, the lights and the air conditioners...ugh. Lol well that’s if so far for now, Cheers 💨