Day 21 - Growth Diary Three weeks in, the plant continues to show steady progress. The leaves are broader and more defined, with a healthy green color. The structure looks stronger compared to the previous week, and the overall growth appears balanced. The plant seems to adapt well to its environment, and no major issues have been observed. Excited to watch how it develops as it moves into the next stage. 💦💦💦Watering💦💦💦 Week 3 27.09.2025 – Watering 0 ml 28.09.2025 – Watering 0 ml 29.09.2025 – Watering 0 ml 30.09.2025 – Watering 0 ml 01.10.2025 – Watering 500 ml Ph 5.9 02.10.2025 – Watering 0 ml 03.10.2025 – Watering 0 ml

Last week I noticed the leaves were a bit dry so I directed the inflow of air directly to the plant, it worked right on and the plant looked better than the day before. The leaves that had a light bright green are now turning to a dark green.

Harvest on day 91 of cycle , day 54 of flowering.. I could leave it few days more for sure however my ladt harvest is nearly finishing so I need to dry this plant as soon as possible hehehe.. Purple punch has really frosty buds, it didn’t grow as much as I wish(I had to move the plant to the toilet with my burple light as there was no space for 3 plants in my 2x4 tent) but they are looking insanely good, with a strong flavor of grape, I am impressed with this smell/flavour, all covered in trichomes, I can’t wait to smoke it.. So my way to harvest it is I cut it down on the main branch and hang to dry out.. all the plant .. I prefer dry trim because it’s way easier to trim.. so now I am gonna hang it for 2/3 weeks and then start trimming.. I will update yield and tasty as soon as I finish trimming.. Overall I am happy with the results 🙌🏼.

week 2 or 14th day I noticed a mutation in my plant but other than that my indoor plant looks so much more healthy than my outdoor plant let's see what the next week brings .....

Harvest week for the Milky Way F1 growmies 🙌 Pretty happy with how she handled this cycle, recycled soil first time ever, dead of winter, undersized light for a 100x100 tent… she just kept going 💪 In previous runs I did scaled harvests, and every time I noticed a visible resin boost and even some anthocyanin production on some phenos, confirmed that a sudden light intensity increase late in flower does something interesting. This time I went a different route: last 6-7 days I stripped most of the non-resinous fan leaves and redirected a lateral bar onto the mid/lower zone to get the same effect. Curious if mechanical stress from defoliation plays a role here too, anyone know anything about jasmonic acid? 🤔 Late flower I pushed the setup to ~200w adding 660nm red bars at 40-50cm, which clearly tightened up the buds compared to previous runs 👀 Pulled the CO2 bottles in flower, without a way to measure it I’d rather focus on VPD and fresh air circulation 🤷 Kept them in veg where humidity tolerance is higher anyway. Now she’s drying and I can’t wait to see how the wet/dry ratio lands 🌿​​​​​​​​​​​​​​​​

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/10- Here we go again with another killer strain from FastBuds, Strawberry Gorilla! I went ahead and germinated 4 seeds originally by first soaking in a glass of tap water for 12 hours then placing in pre-moistened Peat Pellets, of which all four were successful. Two however looked like they they might not make it, so I germinated 3 more by first soaking for 12 hours, then placed on moist paper towels for 48 hours. I checked them on the third day and all had sprouted. I then planted the additional 3 seedlings next to the ones already in pots and will wait 5-7 days to see which look the best, then cull the 3 'losers'. 10/12- Yesterday, I went ahead and ran the AirCube system manually today to give them their first feed. I have the reservoir filled with 60L of well water which was adjusted to 6.2ph @ 75℉. I then added 60ml each of Plagron Cocos 'A' and Cocos 'B' and 30ml of Plagron Power Roots to the reservoir and, after mixing thoroughly, readjusted the ph to 6.3 @ 75℉. I then ran the AirCube system on the 'Fill' setting for 10 minutes. While the system was filling the pots, I used a soil hydrometer to monitor the moisture level in the medium to make sure that I had the floats in the 'Brain Bucket' that control how much solution flows through the system adjusted correctly. Everything worked flawlessly with all of the pots getting saturated, then fully drained... excellent! 10/14- I ran the AirCube system again today after checking the ph of the reservoir which had risen to 8.0 due to off gassing of CO2 which occurs because of the large air stone I have in the reservoir to oxygenate the water in it. I adjusted the ph to 6.2 using SaferGrow's PH Down which BTW I love! After adjusting the ph, I ran the system manually for 10min, then drained it. I have the HLG 650R hung @ 28" above canopy and have it set to 45% power on a 19/5 cycle via a TrolMaster HydroX Controller. Tent temp's are running 80-82℉ with the lights on, 74-75℉ during the dark cycle. RH is being maintained by a 1.5g humidifier at 63% currently resulting in a 1.41kPa VPD. 10/17- Well there goes the first week for these three girls and so far, so good! They all have good color and leaf structure and I'm just waiting for them to take off now. I ran one manual feed cycle today for 15min upping the ppm's to 700, then drained the pots. I'll start gradually increasing the feed schedule along with the ppm of the nutrients starting next week... See you there!💚

I have a hard time adjusting the room temperature because of the air conditioner failure. I started growing with one plant, a week later I added two more, and the next week 2 more.This is why my job is really hard. AK 49s have not started blooming even though they are in their 6th week!DNA genetic seeds and I bought them 3 years ago. In my previous cultivations they flowered in 4 or 5 weeks.With the 12/12 light cycle I encourage them to bloom.Since they're all at 6 weeks of auto seeds, I've started adding the bloom fertilizers. I guess I just need a little luck and good wishes! Please send your beautiful energies...Thanks :))

Day 64: Started flushing the girls today. Got All milky and starting to go amber. Day 65: Still flushing. The girls smell amazing. I have one in the bunch that is SUPER airy and I am just not sure what is going on with her. It's the girl that I accidently broke off the main cola a while back. Not sure if that has anything to do with it or not. Day 66: No new updates. Cut one of the colas off for a taste test and trial run on drying as this is my first go. Figure if I can dry this super dense beauty with no issue, I will be able to dry the rest. Have it hung up in the spare bathroom. Stays roughly 71° in our house and I'd say roughly 40%ish humidity. Day 67: Girls are smelling really nice! I keep looking at trich's and looks like no change. They are all cloudy and only a few amber from what I see. Still new to it so no tellin! Day 68: No updates. Day 69: Girls still looking good. My bud is still drying and looking super hideous. I feel it is drying slow enough but sure doesn't look or feel dense as it did when cut. Will know in several days to come when fully dry. Day 70: Girls smell dank and look the same! No new updates at this time.

Hey everyone ☺️. This week it has developed really well and has finally taken on color again :-) 👍. The additional nutrients as described last week have taken off. 1 liter per pot is poured twice this week 🤗. Today it goes over to the flower tent 👍. Otherwise there is not much to report this week. I wish you a lot of fun with the update, stay healthy 🙏🏻 and let it grow 🍀😊 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

The smells on these autos is just insane! Great terps, decent yield for an auto and should have been better but I screwed up the DWC in the transition weeks/- hard with multiple autos in one dwc bucket

So this little lady was grown outdoors in natural light, in ground, and had crazy heat, cold, humidity, rain, drought, etx—- all things considered, she’s a skunky little beauty! ✌️🏻💚🌿💨

Day21- the blueberry is really starting to blowup. I have a feeling she’s gonna be a big one. Grapefruit was having some problems but seems to be rebounding nicely. Very light lst this week and won’t do much more but will have to defoliate.

Divine Seeds Auto V.2 Contest Big Demon Auto W5V5 7/6-12 Big demon auto is stacked close together. I think there were 5 or 6 nodes so I topped her and used pins to tie down the limbs. I also lollipopped and cleaned out all the under growth.. She is 6 inches tall after topping. Giving water only for this grow. 7/6 2 liters ph 6.5, ppm 238 to get the pot wet. 7/8 1 liter ph 6.6, ppm 262 I included videos of the ph meter with water, iridium glass & iridium glass and copper. When in water only, the ph meter climbs steadly, in iridium, there is slight jumping in the register. When the readings are taken with copper and iridium, the ph meter jumps up and down in wide ranges. So there is marked energy emanating from the glass and from the copper. What is it doing? I don’t know but stay tuned thru the grow to find out. As aways, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿o 💫Natrona💫

Started flush hopefully done in 1 more

Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is off 3. Haftada Topping ve Lst Eğitimleri başladı

9/20 Adjusted lights to 40% at 24 inches. It looks like I have a whorled phyllotaxy with the Sticky Mango. 3 branches per node. Should be cool to see how she develops. 9/22 Watered at 900 mS/cm 9/23 Dropped ir light on plants. Broke a fan leaf off the Moonberry Pie Auto. Removed other leaf to maintain light distribution and symmetry. Otherwise plants look great. 9/24 Added IR lighting. 10 before and after lights on and off. Hung at about 48 inches. 9/25 Topped Pink Apple Soda and Yuzu Sour above 4th node. Watered at 1.080 mS/cm pH 6.1. Watered to minimal runoff. Reduced RH to 62% 9/28 Increased lighting to 50%. Topped the Sticky Mango Auto. Was going to get to tall. The whorled phyllotaxy aspect of the plant is interesting. It is definitely growing faster than the others . It even has pistils already and a VERY dominant side branch. The plant I dropped the IR light on (Moonberry Pie Auto) definitely got stunted even though only 2 fan leaves had to be removed. The other topped plants (Yuzu Sour Auto and Pink Apple Soda Auto) look great. Starting to get bushy. Tucked the large fan leaves. Turtle Taffy Auto has been rather disappointing. If it doesn't show me something soon I may not waist the nutrients and get another Tastebudz Genetics seed going. PLANT HEIGHTS : Sticky Mango Auto 12" Turtle Taffy Auto 8.5" Moonberry Pie Auto 5" Pink Apple Soda Auto 7.5" Yuzu Sour 6.5"

Last week went good for the first week of flower, having trouble again with my ph meter....ughhh. Ordered 2 new ph meters this week, a decent 4 in 1 (ph/ec/ppm/temp) pen and plug in, 3 in 1 (ph/ec/temp) meter with leads to leave in my res(my second one for my second res). Also got more calibration solution, and storage solution. Sick of second guessing my crappy pens, gonna start fresh will all new ph equipment. Lol but she really started to stretch out this week, with the little amount of lst I did to her just before flip she has really bulked up and spread out. 10 days into flower now and she is still stretching and being tucked. I removed a few of the larger guard leaves up top to open up the secondary shoots to light, I have around 40000 lux at the first screen and they seem to be handling it nicely. I will be doing a major underclipping and removing everything below the first net in a few days time I think. I flipped this tent without filling the screen and I’m hoping to keep everything low and tucked until the stretch is almost finished, then let them bud up into the higher lux, hopefully keeping them less then a foot above the screen. That’s the plan anyway. Lol well that’s it for this week, Cheers💨

Week 0: Germinated her the old-school way...two paper towels, between 2 saucers.. Fastbuds: I was so impressed with the packaging ..even though I was not able to get the original packaging (Discreet).. Week 1: just sprinkled H20 on her.. Midweek she sprouted. Week 2: Added some AgriSil K50 for her root development..She showed her first true leafs like yesterday..

Lets goooo she is off to 12/12 very happy girls lets see