Another good week, flowers starting to show, looking good and bushy, it's gonna be a good harvest I think! Banana 2 - 50 cm Banana 1 - 47 cm This week is just water, next week they take another dose of enhancer as in the GHSC feeding schedule.

WEEK 7 It was a good week for my plant. It settled in nicely in the new large pot and has gained quite a bit of volume. For me, this is now a solid foundation to start the flowering phase. Other than that, I didn’t do much this week — just one round of feeding with the additional nutrients, and shortly after repotting I used the Boomboom Spray again. Now I’ll set the lights to 12 hours and send the plant into the flowering phase. I’m already excited. PPFD: 450µmol/m²/s Water: 1x water, 1x nutrient solution With this code, you will receive a 20% discount on your next Zamnesia order: ZAMMIGROW2024

So maybe another 2 weeks? She is super sticky, very beautiful and almost there. I’m getting a little concerned as humidity is super high right now. ✌️🏻💚

Remove a lot of the lower branches this week . Everything looking pretty good at the moment

Day 50 and a new week... the summer comes back to germany and "Hilde 2.0" goes well 🙏😀 Day 51 ... the summer is back in germany ... sun and heat 😎👍... good for the Buds 😉🙏 Day 52 summer sun and warm weather....😎🙌🙏👍 Day53 hell yeah....sun and hot weather 😎🙏👍 Day54 summer sun and heat sounds like fun again 😎🙏👍

Letztendlich gute Ernte, auch wenn ich ein paar Probleme mit der Temperatur hatte.

Hey there, green warriors and cannabis enthusiasts! 🌱✨ We’ve made it to week 10 of flowering with our incredible Runtz F1, and the anticipation is at an all-time high. This week has been all about those final touches—letting the plants reach their absolute peak before the big harvest. The Runtz F1 has truly outdone herself, and now she’s just about ready to show us everything she’s got. Let’s dive into what’s been happening during this critical final week of flowering. Week 10 Flowering Progress 🌿🌟 This final week of flowering has been a masterpiece in slow, steady ripening. Here’s what’s been happening with our star plant: • Bud Development 🌸: • The buds have reached their maximum size and density, with each cola a solid mass of sticky, resin-coated goodness. The trichomes are so thick that they give the buds a frosty, almost white appearance, making them look like they’re covered in a blanket of snow. The compact nature of the Runtz F1 has resulted in some of the most beautiful buds we’ve seen this grow. • Trichome Maturity 🔬✨: • This week, the trichomes have matured beautifully, with a perfect blend of milky and amber colors. The ratio has tipped slightly more toward amber, indicating that the cannabinoids are fully developed and the plant is ready to deliver a potent, well-rounded high. This balance ensures that the effects will be both uplifting and deeply relaxing—exactly what we’re looking for in this strain. • Aroma and Terpene Profile 🌿🌸: • The aroma in the grow room has hit its peak, filling the space with an intoxicating blend of sweet, fruity, and gassy notes. The terpene profile is fully expressed, promising a flavorful smoke that’s as complex as it is enjoyable. This final week has really brought out the best in the Runtz F1’s aroma, making it clear that we’re in for a treat once these buds are cured. Final Preparations Before Harvest 🌾✂️ With the buds fully matured, this week has been all about the final touches to ensure everything is just right for the upcoming harvest: • Continued Flushing 🚰: • We continued with the flush, ensuring that any remaining nutrients were cleared out, leaving behind clean, pure buds. The plants have responded beautifully, with the fan leaves fading as the buds take on their final form. This step is crucial to ensure that the smoke is smooth and the flavors are pure, free from any lingering harshness. • Environmental Control 📊: • Maintaining a stable environment has been key this week. We’ve kept a close eye on temperature and humidity, making sure everything stayed within optimal ranges to prevent any last-minute issues like mold or mildew. The plants have been in a perfectly balanced environment, allowing them to finish strong. Anticipation for Harvest 🌱💚 As we reach the end of week 10, the Runtz F1 is in the best possible position for harvest. The buds are bursting with potency, the aroma is at its peak, and the trichomes are telling us it’s time. However, we’re holding off just a bit longer, making sure that every aspect of the plant is fully ready before we take the final step. The excitement is real, and the anticipation is almost overwhelming. We’re just days away from harvest, and everything is set for an incredible finish. The Runtz F1 has been a dream to grow, and we can’t wait to see what the final product will bring. Stay tuned for the harvest report, where we’ll take you through the final steps and celebrate the culmination of this amazing journey! 🌟💚 #RuntzF1 #Week10Flower #CannabisCommunity #GrowStrong #FinalTouches #StayPositive #GreenMagic

Golden Grow Power Cloner cleaned and ready to roll. Tips to be harvested from Momma have been misted twice over the past 10 days. I’ll take cuttings tomorrow morning at lights on and update further. This is the first time I have run the Cloner in this little propagation tent. Typically, I see roots forming within 7 days and they need to be moved to the DWC cabinet by Day 14.

Strain is Lemon Pie x Gorilla Cookies Auto R2 Grow started on July 8th, 2022 I dropped these directly into another pot with some plants that I was pretty sure were not awesome. I was right and these germinated quickly and are growing well. Out of four, the two I kept were the best ones, so I named them 1 and 2 Direct to soil, same feed as my Green Gelato Auto grow, Flora Nova Bloom with all the good Gaia Green nutes and worm castings and myco in the soil already. Crimson Clover is cover/companion July 23, 2022 Day 15 My impression of these two autos so far: super fast growing, topped on day 15, 1st week of veg. I was NOT going to top them, but they are so fast, I need to buy some time, since the other plants are filling out now. I don't think she will slow down by much.

Día 13 (06/05) Nos acercamos al final de la fase plántula. A ver si ahora empiezan a crecer de forma explosiva! He sido muy estricto con los riegos, dejando que el top hasta el nudillo se seque completamente! Día 14 (07/05) Hago una mejora en la tienda. Hasta ahora tenia intracción pasiva, pero ahora he instalado una turbina para que impulse aire fresco dentro de la tienda Día 15 (08/05) Con el calor que hace me sorprende que las macetas sigan aguantando la humedad, pero al hundir el nudillo sigue húmeda. Mañana haré un riego de nuevo Día 16 (09/05) Relleno el top con sustrato para compensar la compactación y dar mas soporte a las plantas Riego con 300 ml solo H20 - pH 6,2 Día 17 (10/05) Baño de sol de dos horas. Día 18 (11/05) Baño de sol de dos horas Día 19 (12/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Flowering is finally upon us, only took a long, but enjoyable, years worth of research and preparation, looking forward to the next few weeks even more, can't wait to see what it's like when im back from vacation in a couple weeks. I'll only be gone for 18 days, already have multiple friends who can come by to water them once and help tuck the stretch. Will probably be the last update for a little bit, but ill try and get a few updates in over the holidays.

9/10: Coming along nicely...the big Amnesiac is the biggest seedling in the garden. 9/11: I waited to long to transplant them and they have root problems to some degree or another...too wet for too long. I transplanted all but the smaller Amnesiac and Lemon Cream Kush into 3 gallon pots, and those two went into 2.30 gallon pots. About 50% brownish roots on all but the smaller ones. 😕 I powdered the planting holes with myco, tricho, and other goodness. I added two Mars Hydro 150w lights, and a 60w 6500k LED panel light since they are all spread out now. The average CCT is still a little over 4800k, even though the Mars are a little warmer color temp than the Viparspectras. 9/12: Between the root problems and the transplant, they looked horrible, so I sprayed them with BoomBoom Spray today and will do a good root drench tomorrow with BushDoctor Boomerang. They looked better by the end of day, but still have a ways to go to get back on track. 9/17: I fed them boomerang only twice this week, and also fed them kangaroots yesterday. They are all looking strong, and branching well. The big Amnesiac is impressive. Great structure and amazing vigor. The LCK is finally starting to look like she belongs in the same crop. I'll prolly flip to 13/11 with emerson effect in the next couple of days.

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 1/3- Well, here we go into what's looking like the last week for these three beauties from FastBuds! I'm continuing to flush all three and the #1 and #2 pheno's are really getting some beautiful coloration! The #3 plant that has struggled the entire run is so pale she almost looks white, but she's the terpiest of the three, which I think is due to the stresses that she's been under. All three cultivars are covered in frost, and on the #1 and #2 pheno's the trichomes even cover their shade leaves! 1/5- After checking the trichomes on all three I decided to begin their 72 hours in the dark when today's light cycle is finished. All three plants have 85-90% milky trichomes with 5% amber showing, and will continue to mature during the 72 hour dark period before they are hung to begin the drying process. 1/8- Well, today is the day! All three Strawberry Gorilla's were released from 3 days in 'dark🌑jail' and all three look absolutely gorgeous! 😍 All three Strawberry Gorilla's are loaded with trichomes, and each has its own unique terpene profile with the #3, shockingly the 'loudest' of the trio. The #2 is the best looking of the bunch IMO, with the #1 taking the middle slot. After taking some pic's of all three, I cut them each off at their base and hung them in my AC Infinity 4x4 to dry for 10-14 days. I have the tent equipped with a de-humidifier, humidifier, and a fan to keep the air gently circulating. It's winter here so I'm pulling in outside air into the tent which is keeping the temp's in the 55-60℉ range, and I'm keeping the RH at 50% for the first 24hrs, then I'll up it to 60% for the remainder of the hang time. I hope to see you at the harvest report, I know I can't wait to see how these beauties finish up! 💚Growers Love! 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Fruit King (Clone) In greenhouse Veg : 18/1/24 Veg : 7-8 Week To be continue ... thank

.

I’m going to leave the seedlings in the small brown pots until their 1st node and then I’ll transfer them into bigger plastic 3.5gal pots with 80/20 soil to perlite potting mix. One Dosidos is looking a bit behind and the one with the weird leaves ended up catching up to the Northern Lights, maybe even growing faster than it. All Dosidos’ ended up dying but one and I’m sure it’s on the way out. Northern Lights has had no issues and growing perfect.

On day 1 week 2 flower the Gals are really stretching now, hope I have enough room 😂They seem to be taking the flower nutes well even without a transition phase 😀. On day 3 the gals have stretched so much they are within 6 in of my light hoping The stretch will slow down soon yikes 😱. I defoliated the lower and upper canopy to bring in more light and air flow. On day 6 the stretch seems to be slowing down. I increased my light intensity from 75% to 100% to see if I can halt anymore stretching. I also bent my highest colas down as they were touching the grow light 😂. On day 7 flower clusters are forming and the stretch has slowed. I will continue to bend over the tallest colas and do my best to manage the canopy without too much loss of yield. It looks like some of my colas might get light stressed/burnt. There is not much else I can do except learn from my mistakes...next time I would flip the plants earlier and give them stronger light intensity before flowering stretch. The top leaves are canoeing so I reduced light intensity back to 75% to see if they improve. I got my first clog in my blumat systems main line... I will be switching to liquid based fertilizers for the next run as I believe my fertilizer caused the clog. I released the clog by using a pipette filled with water. I took the pipette and squeezed liquid through the main line exiting my reservoir. Then the lines were running smooth 😂

Looking very good, this ladies are breaking the shield within 48hs since planted as I was expecting, let's see how my beautiful queens develop on this "little run" on a 2x4! Growing with a tsl2000 by mars hydro! 👨‍🌾💯✌️ Stay tuned guys.