7 horas de sol, Floranova Grow y Armour Si de GH, agua de grifo. Le sentó bien el corte ápical. Le podé el piso inferior, tal vez hice apical tarde. Apliqué LST.

I put in some work yesterday and today. Chopped the clover, added some buildasoil craft blend and cased it with BaS compost and transplanted her from the 1g to the 20g. I also set up the Blumat irrigation system and the tensiometer. I’m excited to see how much better it waters than I do. Based on the tensiometer it seems I was greatly under watering. Trellis net going up in a few days.

Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺

Top with new soil and recharged

Okay vor 5 Tagen Blüte eingeleitet,ist ja 137 cm hoch und 140 cm breit.. Wird ne ordentliche Hydroponic Pflanze die Purple Lemonade von Fast Buds!!

Dernière semaine de rinçage déjà elle dégage une odeur de fou les nutriments sont entrain partir du coup elle ressort sont vrai goût tropicana cookies 🍪🍀

Looking forward to Super Lemon Haze finishing.

11/08 - I have never had a plant with more trichomes on it... I defoliated a couple of days ago and it was akin to doing a wet trim - fingers and scissors were all sticky! @SwissKush told me it would be filled with resin but not even that warning prepared me for this! Just amazing... Her buds are bulking up and I'm just in awe... just in awe... 11/10 - changed out her reservoir yesterday and was very interested to note that her root system is about half of what my #2's is... which only makes sense given the abuse I showered on this lady at the beginning of her life. One result of that is a far more compact plant ... but damn is she frosty! She's looking good, happy with her new and elevated nutes.... all's well! 11/12 - Happy as a clam, buds are all bulking up and everything is frosty... Still have plenty of weeks (4?) to go. 11/14 - Have had a houseguest for the last couple of days... while I love some company once in a while, it really interferes with my daily routine so I've missed a few of the daily photos. She's doing well and just keeps getting frostier and frostier!

Die Temperaturen sind seit einigen Tagen sehr niedrig, was ich versuche, möglichst zu regeln, indem ich den Lüfter bis auf 10 % gedimmt habe Und eine Heizmatte im Zelt habe. Tagsüber hält sich die Temperatur relativ gut bei 18-20° nachts fällt sie auf 16° wenn das Licht aus ist. Die Pflanzen wurden entlaubt und beschnitten. Sie entwickeln sich toll und werden langsam schön purple ❤️

FBT2308 is doing good. She is growing great under the Medic grow mini Sun-2, in the Agrogardens nutrition. She is starting to form her cola sites , and will continue to stretch as she stacks. She may really explode in growth this next week. Everything is looking great. Thank you Fast buds. Medic grow. And Agrogardens nutrition. 🤜🏻🤛🏻💪🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Hello GD !!!! This week things went complicated... Both cheese started preflowering and flowering right now, imma put you in the whole context of this .. Im really confused at the moment Both plants showed preflowers, over developed pre flowers ? .... Then hairs appearing, and i started to worry about this.. Temperature was good at 10/5 so put the plants outside, topped the girl and removed a few lower branches Couple of cloudy days and .......more hairs... maybe more like a first stage flower Talked about this with a more experienced grower, he told me that the plants should re vegetate when noticing longer days.. I have been researching and many people coincide with the revegetation, but.... maybe some grower or skilled revegger can help me out ? I mean im feeding the plant with BioGrow ph 6.5, yesterday with Green Explosion and BioGrow to seeif this helps the plant .... My plan was to make a monster plant this year, but things are not going as expected. Got a Jack Herer waiting if i need to germinate a new plant now but would be a mess of Cheese Thank you for your time guys !!!!! EDITED 22/05 : The other cheese which have a slowly develop in comparision, has developed flowers too but are smaller, and seems she is showing ReVegetation Signs !!!! with more leaves in the popcorn buds and new growth, so we are waiting a few days to take a decission. Thank you so much for the advice mates ! EDITED 24/05: The buds are getting frosty .... wtf, temperatures are low, this is a really weird year... Winter come later than usual, and still here..

Terminando la 4ta semana y ahora voy a pasar a Overdrive . Espero que esto resuelva los problemas de PH que estuve teniendo. Si bien algunas hojas quedaron muy marcadas, espero que ahora deje de avanzar el amarilleo. Las flores se ven bien y las hojas chicas por ahora no fueron afectadas. De todos modos voy a seguir monitoreando el ph a diario. Hice un lavado antes de agregar esta solución y de paso hice una inundación del caño principal, pero salió bastante limpio todo. Ahora entro en las últimas 2 o 3 semanas, así que es la parte donde no puedo errar más.

11/24/18 Week 5 of flower. I think im falling in love with these ladies the buds look so promising. I know the next is going to be exciting as they really start to pack on some weight. The smell is still not 2 noticable though. I thought it would be stronger at the point. Anyway im happy with everything so far. Smooth ⛵ 11/29/18 Almost end of week 5 not much happening buds just putting on weight. They will get 1 more week of feedings (week 6) and then flush untill harvest.

02 October 2018 - Day 99 3rd day of flush and we see her begin to grow nicely. Day 100 - Happy lady as she gets densier and begins to really smell. Day 101 - She is maturing lovely. Day 102 - Orange pistols curl. She is on her way. Day 103 - Mature and ready. has thickened up significantly. Day 104 - Water topped up and pH balanced 5.4 Day 105 - Trimmed after the video.

Fastbuds seeds Gorilla zkittles auto Only using spring water for first week and spraying with foop mist. Going to use foop nutrients with Humboldts secret cal/mag and nectar for the gods ph up and down! Planted right into substrate. I’m using Mother Earth coco coir/perlite mix with hydroton at bottom of pot

Eternity Grow Cup - Week 9 Veg Update We are stepping into Week 9 of vegetation, and things are getting exciting! The plants are thriving—compact, bushy, and growing beautifully. This week, we introduced a SCROG (Screen of Green) net, an essential tool for maximizing yield and optimizing plant structure. Let’s dive deep into the why and how of scrogging: Why Install a SCROG Net Now? Maximizes Light Exposure: The net allows even light distribution across all branches, ensuring every bud site gets the optimal amount of light. Controls Plant Height: By guiding the branches through the net, we keep the canopy even and prevent excessive vertical growth. Enhances Airflow & Reduces Mold Risks: Spreading the plant out increases air circulation, reducing humidity pockets and minimizing risks of mold and pests. Increases Yield: More bud sites exposed to light mean higher-quality flowers and greater overall production. For now, we’re still not using the under-canopy lights, though they will come into play soon. The ICL 300 is positioned strategically, and we will likely move them around as needed later. For now, the focus is on structuring the plants and ensuring they fill out the available space properly. Optimizing Airflow - The Vortex Effect Air circulation is crucial for plant health, and this week, we’ve optimized airflow by positioning the fans to create a vortex effect: Fan Positioning: Each fan is placed at the tent corners, pointing in different directions, ensuring dynamic airflow instead of direct wind hitting the plants. Benefits of a Vortex System: Reduces hot spots and evenly distributes CO₂. Strengthens stems by creating a natural resistance. Prevents stagnant air, reducing mold and pest risks. The extraction system is powered by an AeroFan, connected to the AeroFan Smart Remote FRC1, currently running at 60% speed. This setup efficiently manages humidity and temperature while maintaining optimal air exchange. Current Environmental Conditions & Feeding For now, we’re maintaining the same water schedule and nutrient regimen. The environmental conditions remain stable: Temperature: Holding steady at ideal growth levels. Relative Humidity: Balanced to encourage healthy transpiration. PPFD (Photosynthetic Photon Flux Density): Kept at optimal levels to support vigorous vegetative growth. CO₂ Levels: Elevated but within safe limits, promoting faster growth. The plants are filling the space beautifully, but we know that the flip to flower is approaching soon! The next phase will depend on how fast they continue to spread, and adjustments will be made accordingly. Closing Thoughts & What’s Next? This week was all about structural optimization—ensuring proper airflow, training the plants with the SCROG net, and keeping everything in balance before the transition to flower. The upcoming weeks will be crucial, as we fine-tune the environment, possibly introduce the under-canopy lighting, and prepare for the flowering stage. A huge thank you to our sponsors Aptus Holland, TrolMaster, CannaKan, Grove Bags, Ziggi Papers, and of course, Zamnesia, Plagron, and Grow Diaries for making the Eternity Cup possible. And to our incredible community—followers, supporters, and even the critics—we appreciate every single one of you! Stay tuned for next week’s update, and don’t forget to follow along on YouTube and Instagram for exclusive content and behind-the-scenes looks! See you soon, and happy growing! Let’s keep pushing forward, and best of luck to all the competitors—we’re all growing something incredible together. Until next time! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

Taking it slow with the veg state to develop larger, stronger plants and it seems to be paying off. I've trimmed the lower leaves at least 3 times this week. I think I'm going to extend it out at least one more week before switching to flower state. Early in the week I switched from blue to purple to allow the branches to push through the screen more. Then mid-week blue, to rebuild the fan leaves, then back to purple once I rearranged everyone into their optimal positions for capturing light. I see a lot of potential for multiple colas. Each time I switched to purple, I raised the light up a few inches to help them stretch. As noted last week, lamp distance is being measured from top of net (not top of plant). I continue to add compost tea every Tuesday, which they love :-)

So as I'm not home this week i will just update what i did on my last day home. I added another reservoir, put a pump in it and a fill hose up into my main reservoir (which is 4 feet off the floor to gravity feed my blumat system). Installed a JB and wired in my pump and 2 level switches. They are wired in series with the switches in the normally closed position so the water level will break or make the circuit. Switch 1 is in the main reservoir to call for water and switch 2 is in my spill tray to stop a potential runaway from happening. After getting everything filled to the levels i wanted i did a test run and it worked great. Unfortunately i didn't look closely enough at the specs on the switches and #1 burnt out because it's meant for dc power not ac. My bad , so i hooked up a timer set it for 2 minutes a day as i didn't have time to fix it. I decided that it was a good time to flip over to flower and I'm going with 13/11 lighting schedule see if there's any difference. Happy growing