The Grow Awards 2026 🏆
Processing
Likes
11
Share
@MRTHC
Follow
things are still on the go..Looking at the tricomes the are still clear with hints of cloudy.. Coming along pretty well. Im just watering with plain water now and just enough for a light runoff. Ec is low already and I don't think I can get it to anything less. Just doing routine maintenence this week. There has been no change in the colour of the leaves and this is the 11th day of. plain water.. Its all a waiting game.. I also changed the light schedule to a 11-13...... its supposed to help in trichome ripening... I hope. 😀 The vanilla Kush looks ready but I'm not sure. If anyone has an opinion on how much longer please share
Likes
8
Share
Growth is outstanding I overwater a little on its first water and its final pot so it is slowly but surely coming along truly in an outstanding genetic handle stress amazingly going to start low stress training today might wait till next week just to let her recover a little from the overwatering🔥
Likes
10
Share
@FunkyNutz
Follow
Week 4 seemed a bit slow at first, but i also realised that I wasn't treating coco appropriately, I should feed nutrients every time I water and control the ph and ppm better. By the end of week 4 I got a water quality tester and am now able to properly take my ph down and monitor ppm so my plants don't get nutrient burned, but still gets enough nutrients in time. I also allowed good amount of the top layer of my coco to dry because I mixed up advice that received about soil and coco together. Apparently coco has no issues with overwatering unless your pots have no drainage so in the last 2 days I started treating coco the way it's supposed to be treated, I also finally got calmag and my plants are showing good signs of health past 3 days, they look revitalised and happy again 😊 Unfortunately, apple fritter was way too sick for me to continue with it so I restarted it in a proper coco and perlite mix that's non fertilised, that's a separate diary because its a whole month later. I decided not to train the first 2 plants just to see how the natural process is supposed to go.
Likes
21
Share
@NSABND
Follow
Start of Week 9 🙌 I plan to use fertilizer for bud growth from day 64 to day 70+... depending on when the harvest time occurs 😉😄👍 Started working with fertilizer today, every 2 days a mixture of 10ml per liter as long as the buds have not properly developed trichomes 😵 I hope this works 😵😲😱 Day 68 with fertilizer again
Likes
7
Share
This gurl is done! She smells and feels sticky buds are not huge how I wanted but I take into consideration I use very little fertilizers and she started turning yellow and leaves dying!
Processing
Likes
8
Share
Que pasa familia, esta semana hemos lavado las raíces de un ejemplar, el otro ejemplar se le sigue echando nutrientes. Ph controlado, intentaremos aguantar esa planta alguna semana más, las otra por lo menos aún le quedan un par de semanas. Ph controlado bajamos humedad a 35% y la temperatura la mantenemos por debajo de 27. Estas flores están cogiendo unas tonalidades increíbles, y empieza a desprender unos aromas brutales como a ácido.
Likes
29
Share
Welcome to my Tiny/Rare Pot Diary for seedsman contest. Wk 3. Days 15-21. Plant has picked up this week. Leaving behind her issues from the 2nd week. (Which I now know where caused by the extreme high PH bioenhancer adds to the soil. On normally terms it would be fine. But, as I used a light mix soil.) I found out again the hard way coming into the later stage of this week. More PH issues showing up on the healthy growth. (And it came 2 days after adding the bioenhancer, all I need to do, is treat it as if it was coco and PH the bioenhancer to bring it back down to 5.8 ish.. just until the soil has had time to change itself and have better nutrient uptake. (So anyone using bioenhancer with biobizz light mix soil, pH it as it says to do as if you were using coco) Other than coming back into PH issues. The plant is doing fine. Locked out of certain things like calmag at this stage. I should of mixed some all mix with it, and I doubt I'd be having any issues at all. But, growth has been good this week. Hopefully this will be the last of my mistakes brought out onto this poor girl. Nodes are growing, and taking a nice shape. For been in a .75ml plastic bottle, I just have to keep her environment, (substrate) in desired levels. The Bioenhancer is meant to give a PH of 9ish with water. But, shouldn't affect any soil but says with coco, you need to PH..It's just I used light mix, and that's more coco than soil, and takes time to be treated. All my other plants took these feeds just fine, as the soil was mixed with all mix soil + light mix. The injection of my AIrPump seems to be going well. But, hard to tell, what kinda impact its having. Thanks for viewing this week. Be sure to drop a like or comment so I can visit your diaries. Either way, thanks for dropping by. Stay safe my friends.
Likes
92
Share
Week 12 D86 Flowering 35-40 days since stigma started showing. She is growing really well, for now what ever all the little rust spots were are gone. Still not solid explanations as to what it was or to as why it came up. Made a hard choice. And snipped the roots that were drinking from the plate, as this could of been the cause as to why this was happening on otherwise a healthy looking plant. Lowered the PPM from 1550 down to 1250 and will bring her down another 3-600 over the course of the next week and then another 2-300 the following week and keep her on regular 700ppm feeds of just bloom, but candy overdrive and B-52. All other nutes will be pulled over the next 2 weeks, gradually and not all at once neither, don't want to shock her into a def, just want to make sure all this crap is flushed from her. Big bud, she got her last feed of that today and that's her done on that now. She was started on her normal mix - 300ppm. RH is holding at a steady 65 temp is 26, 21c with lights off. 14/3/22 Added my 2nd intake fan was able to bring down the RH down as low as 53% with the 2 on full blast. Rooms RH is at 46% dehumidifier has been running 24/7 since I got it. Not good enough though. It works but looks like I'm going to get a 370watt 25l (meaning, it takes 25l out of the air every 24hrs, the 1 im using now is a 60watt that gets rid of 2l every 8hrs). It'll do in an hour what this machine takes 8hours to do. So it'll actually use less energy overall. 18/3/22 Plant is coming on nicely, putting on lots of bud mass, hopefully it'll keep packing on bud as there is not much in the way of sugar leafs it'll just be nice dense bud. For the last 24 hrs I've thrown her into a hard flush, 6l of water with 2 flushes one last night 1 tonight after each flush 50ml with sensi cal mag extra 1ml/50ml was given so the plant wouldn't go into full flush and the nutes left behind will break down helping nute uptake. Very important to introduce some cal as if you flush for too long and have a high build up of salts you'll cause a form of nute lock and throw plant into the flushing phase. So always use some cal mag on top to break down the nutes you are trying to flush. Thanks for reading gottagrowsometime
Likes
3
Share
- 3.5 gals in bucket - Splitting nutes in half (0.95 micro, 2.5 bloom, 1.5 calmag, 1 hydro) and feeding every 3-4 days so it gets full nutes over a 7-8 day period - 356 ppm for half nutes - started noticing browning on leaves
Likes
13
Share
@Roberts
Follow
Blue Dream Autoflower is doing good. She had her first lst and defoliation today. Everything is looking good. Thank you Spliff Seeds, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
9
Share
@Djuff
Follow
Trychomes on the sugarleafs are 50% brown, on the flower itself maybe 10% brown.
Likes
223
Share
Well growmies this one is another keeper that's for sure 👈 couldn't of asked for better Genetics 😉 My all time favorite 😉 She was a stretchy girl unlike her normal traits in the past as this is the third time I've grown her , I absolutely love the Afghan Kush 😳 😍 😅 All 3 plants are truly Amazing , I would definitely recommend 👌 The Gorilla Punch 👊 OG Kush 👌 Afghan Kush 👍 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34
Likes
1
Share
@ladyjane
Follow
9/15 - I missed my 4 week feeding of my Purple Microdots 😑 Didn't catch that mistake until I noticed some yellowing. Ugggh. But, I gave them each another feeding of Bad Bunny Nutrients, as well as some @rootsorganics Uprising Bloom & Foundation for that added boost now that they are well into flowering. I also watered them with my Roots Organics Terp Tea Bloom Compost tea that I brewed for the ladies in Flower in the 8x4 tent! So, now they are bouncing back and becoming green and lush again. 9/18 - All four are coming along nicely. They are very low maintenance and are well into flower now. These Purple Microdots continue beat all my other autos to the punch and she continues to hit EVERY milestone weeks before the others as well. She's quickly becoming my favorite auto to grow. I've decided to pop a few more seeds, identify the female, then plant one in a 3 gallon pot to see what she can really do! 9/19 - Did a lot in the garden yesterday. Since everyone is in flower, I top fed the ladies with @rootsorganics Elemental for calcium and Seabird Guano for phosphate. Followed this with some RO water and molasses.
Processing
Likes
Comments
Share
Likes
16
Share
@Mrg7667
Follow
Noticed what looks like to me a little nitrogen deficiency so started feeding biogrow at 2ml 2nd week with the new lights and they seem to enjoying it although space is getting very tight in my closet! Going to need to migrate to tent sooner then later
Likes
6
Share
We start the first week before sprouted! We are excited to look the grow on RDWC!!
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 02/19/22 First week of flower at last!! We didnt feel like waiting another 2-3 weeks for the next tent to clear so we setup a temporary 18hr space for moms and clones, both tents are officially 12hrs now (we just ordered a 3rd tent)..the Bangers have been in flower for 2 days now and they were definitely ready, they've already grown a few inches since Wednesday...we started bloom nutrients last week and cut grow solution this week..they couldn't look happier atm..I think we're in for a fantastic yield (i just hope we don't outgrow the space )..we also have 10 Solo cups tucked behind these of our own cross all flowering at once... We intend to lower the MarsHydro around week 3 of flower...we only grabbed 1 cutting of the Bangers so I'm REALLY hoping it takes because having mom of this wouldn't suck.. thanks for dropping by and reading my novel if you chose to do so lol, happy harvests friends!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 2/22/22 🐱👌 Bangers have grown a few inches in the last couple of days and our home cross is growing fast at 12/12 from seed ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
3
Share
Wir sind nun an Tag 14 angekommen. Heute habe ich mit dem LST angefangen. Temperatur bei 24C und eine LF von 65-70%%. Die Lumatek ist 40cm entfernt und auf 75% gedimmt.