Likes
Comments
Share
@Kirsten
Follow
18.5.25: I watered with 3ltrs of dechlorinated water PH'd to 6.4. I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion PK booster ♡ 7ml Trace PH: 6.4 PPM: 780 I added the PK booster this feeding, just to provide some phosphorus without risking an excess. Next time, I won't use it. ☆ Xpert Nutrients PH down, up to 1ml. ☆ Ecothrive Neutralise 1 drop per litre from the 1ml pipette, which is attached. This is my dechlorinator. 22.5.25: Well, I had a total disaster with my HulkBerry. My tall, oscillating fan fell over and smashed straight down on her. 3 tops broke, so I had to improvise. I made the repairs and took the photos in under 5 mins. The next morning, the branch closest to the camera had fallen again, attached by only a small membrane. Amazingly, she had turned all the leaves, now on the floor of the tent, upwards towards the light. I patched it up again, and she's not looking too bad. However, I'm going to have to be exceedingly careful when watering the two other plants and moving the pots. I'm going to need to add support, stakes, maybe. I will think of something, no doubt. After all this occurs, I taped her up and watered. I fed 3ltrs of dechlorinated water PH'd to 6.4 with; ♡ 1/2 Tsp of Ecothrive Biosys. I also added ♡ 3ml of Xpert Nutrients Cal-Mag amino acids. I figured she would need some nitrogen and the building blocks to heal. N5-P0-K0. I will water again with the same today. Send some healing vibes 🍃✌️💚🤞🌱😊 24.5.25: I watered with Ecothrive Biosys 3ltrs each. The plants are still drinking at least 2 litres per day. They are increasingly thirsty, and it's important that I don't let them dry out. The soil is mostly coco and perlite, so it can dry out quicker. There are plenty of worm castings, too, so that definitely helps. The buds are developing and progressing very nicely, keeping up with the flowering nutrients and alternating between Ecothrive Biosys, Trace, and Greenleaf Nutrients. 25.5.25: I watered with 2.5 ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 840 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. Thanks for stopping by 😊🌱🤞💚✌️🍃
Likes
7
Share
Second week of bloom: steady growth is visible on both. I incresed the bloom nutrient ratio to 3ml/L Water. Atm I have to water them everyday with 1L Water, I have the feeling that my dehumidifier is pulling more moisture from the soil that I would have liked. 2nd picture shows that both Exodus have different shades of green although both follow the same schedule and feed plan. I switched positions in the tent, maybe it’s due to the air circulation. As always I‘ll add more pictures throughout the week. Now back to Final Fantasy VII Rebirth 😘 Update 05/03: Took a couple of pictures plants are gaining in height, I added 0.5ml Calmag to the Water once this week. No sign of Cal or Mg deficiency but I added it to prevent during this major height growth phase.
Likes
19
Share
@nonick123
Follow
Día 6 (29/04) Spray solo agua el top del sustrato. DLI 13 Día 7 (30/04) Spray solo agua el top del sustrato. DLI 13 Día 8 (01/05) Spray solo agua el top del sustrato. Subo a DLI 17 Día 9 (02/05) Elimino la cúpula casera de humedad y empiezo a regar con 300 ml solo agua Día 10 (03/05) Empiezo a luchar con una ola de calor inesperada para esta época, que me trae temperaturas exteriores de 30 ºC y humedad relativa del 30%... Mantengo la cúpula casera de humedad Día 11 (04/05) Hace muchísimo calor.. 30 °C. A ver como lo llevan Hago un invento casero para aumentar la humedad Día 12 (05/05) Primera alimentación con Aptus! 300 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Creo que las plantas se ven un poco pequeñas para tener 12 días... esperando por explosión de crecimiento en los próximos días.... 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
9
Share
After 7-8 weeks of flower she is ready to harvest. I give an update when she is dry and trimmt. I hope you enjoyed my little grow report. stay healthy
Likes
29
Share
@Omisan
Follow
Hello fellas 🙏 Ladies are stronger than rocks, they can't stop! 💪 I start Hard Stress Training on 27 of June, now at the 2th of July i just top them a second time, after an hard main-lining too 😅 and now they're praying to the sun (lamp) 😍😍 I Talk to them every time that I go in the box, I sing for them I cuddle and i love them everytime more..that's the way i know! 😇 Hope you enjoy the VIDEO of the last topping, i put off the music because you could hear my dog's (Pluto!) shaking 😂 and the "TAC" moment :( I really hate cut off some part of them, sincerely...but, i think i do it very well 😂 Wait for everyone impression! Have the best (green) care of you! Omisan 🙏
Likes
16
Share
We have passed the month and we are madly in love with all our autoflowering plants, we have two per strain, one worked with a mainlining adapted according to the characteristics of the plant and one that grows straight, we can't easily give up the main cola. For now we will show you those worked with the techniques that are more interesting to see and later planted earlier to make them finish more or less together with those that will grow straight and fast. We really like our Green Cure CBD F1 worked with the Main Lining. It has an average interodal distance which allowed me to bend the lateral branches properly and obtain a great shape. I really like it to see. So topping at the third internode, main lining, no pruning until the third internode and topping them again so we have multiplied the buds adequately. The application of the techniques is a delicate moment also for fertilization. Topping slows down the growth of the plant a bit and does not make it require all that Grow fertilizer that is normally recommended. So you have to go really slow and understand when to reduce the nitrogen. Better to prepare the soil with fertilizers to mix with the soil probably. The problem is sweeping now that it is going into flowering, the plant has shown the first fluff, declared the sex, and the fertilizer will soon be needed indeed. You have to swell. In any case everything is under control and I will demonstrate it to you during the flowering phase. Wait for the Uncle BreadandBuds and see what he does. Remember the cold temperature makes the girls absorb food much more slowly than in summer so be careful to give the right amount and to dry the plant in maximum 2 days or you risk imbalances. We are always using soil, feeding and all the recommended additives of Plagron 100& organic we have only lowered the amount of grow in this topping phase for the reasons given above. ---- Decide on the right soil and calculate your fertilizer card based on the soil on the official website. -- www.plagron.com Try a seed of this variety that drives us crazy.. ---- https://www.zamnesia.io/en/10672-zamnesia-seeds-green-cure-cbd-f1-automatic.html Description Zamnesia // Zamnesia's breeding team has harnessed F1 genetics to bring you Green Cure CBD F1 Automatic. This autoflowering cultivar is easy to grow, accessible and reliable for all levels of experience. Ready in just 11 weeks, growers can expect impressive yields of tasty buds with a clear-headed effect that's ideal for meditative moments. All the best that mother nature can offer is on ---- www.zamnesia.com
Likes
4
Share
Week 2 for our Apricot from the fastbuds family All looks good and the buds are forming real quick, we continue for now with master root and master bloom, next week we start to add some more addictives Some plants had a little to much nutrients but we corrected the dosis and continue with a little less bloom nutrients! For the rest all good!!
Likes
4
Share
Likes
5
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Processing
Likes
11
Share
@BlumenBot
Follow
1/4 - fed 1gal distilled water, 6.0pH. Starting RAW nutes next feeding. 1/6 - first RAW feeding. Came out rather low ppm so I may double my feeding chart for flower. Everything else is looking good. 72.7*F 5.8pH 818 ppm 4g BLOOM 0.7g Phosphorus 0.75g Kelp 0.55g Cal/Mag 0.5g ominA 2g Microbes Bloom Stage 1.25g Amino Acids 0.25g Enzymes 1/7 - dropped the AC Infinity controller to level 2 as an experiment overnight to see how temps will rise in both compartments. Light is at about 900ppfd a few inches below the lowest tops 1/9 - no issues with fan speed at 2! RAW feeding tonight. 70.5*F 6.1pH 1390 ppm 8g BLOOM 0.96 Potassium 1.5g Kelp 0.25g Cal/Mag 4.2g Microbes Bloom Stage 1.25g Amino Acids 0.25g Enzymes Also found a new way to mix my RAW nutrients without having them stick to the bottom...small landscaping pond pump! It gets the water moving nicely and I just drop the dry nutes in, mixes it for me and I can easily fine tune PH and test PPM without having to shake and take samples! Huge win. 1/10 - She's getting fatttttt!!! Long time to go but just sayin...my lady in veg needs at least 3 weeks so hopefully I'm not stepping on myself here soon!
Likes
13
Share
@shwable
Follow
Everything looking fine so far. I gave them a little amount liquid grow enzymes with distilled water on 19.04. what seemed to boost the growth. If You have any tipps or recommendations feel free to let me know.
Likes
16
Share
To start the week i'm seeing the buds start to swell, i've also had to give a peroxide foliar spray to be sure i'm not going to be ingesting mites... shall see how it goes. ---- sprayed some dilute 3% peroxide mixed 2-1 with water. misted the shit out of it with distilled to get the humidity up afterwards the ladybugs were having a field day on all the water fleeing spider mites. see video
Likes
17
Share
@Smokwiri
Follow
Plant is doing great, loving the nutrients, loving the light. Grown under Mars TS600
Likes
17
Share
It's been a bit of a rocky week for all the plants, things popping up all over the shop but I'm putting it down to being a noob. Light distances/intensity issues and plenty of upcurling leaves from being a proper wally with my nutes. Royal Bluematic #1 - She's had a bad case of Light Burn and it's explained below. I've also noticed this one 'moults' the most and I have quite a handfull of dead/deficient leaves per watering where the other 2 plants in the wardrobe barely drop, but I am at a loss with her (other than changing light height and intensity), I've kept her on her nute schedule as I don't beleive nutes are to blame. She's had it hard from the beginning so it could be that....a bit of a bride of Frankenstein hahaha, she's rather stumpy and very bushy with the main cola being quite chunky, again like the Royal Jack my Royal Blue is airy and whispy pistil node sites but plenty of them...why so long to thicc? the other Royal Blue is coming on rather awesomely....hence more pictures of her...sorry #1. I also had to do an autopsy on a branch, I kept wondering why it was looking so buggered and it was due to it being bent right over at somepoint snapping the branch quite high up making it hard to notice, sliced it off and squeezed the end of the branch together, closing it up and keeping it tight. Royal Bluematic #2 - Well....I'm in lurrrve, she's coming on fine, my lil shorty, budding up with thickness and fat cola, plenty of nodes and very sticky and smelly....Really not a lot long left on her I think? Trichs are not so cloudy yet so maybe a couple more weeks. I have gone and really messed up, the last of her main fan leafs on the cola has crisped and curled upwards which I think was due to being moved to the middle of the grow box and suffered PAR intensity overdose!! I've now moved her back to the side and hope for the best...Not a lot else to say for this one, I'll let the pictures do the talking. If you can see on the pictures, the leaves that face the middle of the LED are bleached and weathered. I've hightened the light and gave the LED rig a jig and got some more efficiency out of it in terms of height and PAR intensity, I'm still needing to purchase a PAR meter but I have learn't that this 600w does kick out some and if there's a plant directly below it then that's some light blasting down on the poor plant. With my next grow I'm only dealing with 2 plants so the light share will be much better and make much better use of said PAR :) As for the feed I've notched Guanokalong Bloom up to 0.3ml but keeping CalMag and Rootbastic the same now throughout the grow. I'm keeping the pH at 6.3 as they seem to like it. I'm hoping this week we'll start to see fatter buds and better leaves. Today's album played to them was 'Leftfield - Rhythm & Stealth'
Likes
18
Share
ES: Segunda semana, 26/09/2021 a 03/10/2021, al parecer todo va bien, aun con la duda acerca de como contar las semanas, ya estan soltando un olor ligero lo cual es interesante. No mucho mas que decir, la temperatura se ha regulado bastante, hace mas calor lo cual es bueno. EN: Second week from 26/09/2021 to 03/10/2021 it seems like everything goes accordingly, still with doubts about how to count up the weeks, the plants are starting to give off an scent which is interesting. Not much to say, temperature levels have been sorted out so that's good.
Likes
73
Share
@Roberts
Follow
Lilly x White Widow is bulking strong. Very frosty and a flowery aroma. She is growing great under the Spider Farmer G5000/UVR40 lights. I am doing my best to keep her happy for these last few weeks. Everything is going really good. Thank you Spider Farmer, Athena, and Ripper Seeds. 🤜🏻🤛🏻🌱❄️ 🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)
Likes
46
Share
@Seedler
Follow
WELL! What an experience. I made some mistakes, learned a lot and still got some excellent weed out of it. Super frosty, LOUD and SO dense it's ridiculous 😂 Sadly i got some (a lot for me) mold, i encountered for the very first time. With it being almost winter in Germany, the temps dropped really hard for some days and then even 60% humidity was too much for the strain. I also would say it isn't that resistant against mold, so just keep that in mind, the buds are so dense, it's really easy for them to trap water. I had to throw away like 1/4 of the yield, mostly the top buds 💀 That kinda sucked, but it could be worse, it's fire weed tho, i'll add pictures of the buds later.
Likes
20
Share
This week we were away on vacation. And had 2 friends house said for us these pictures were sent to me from him. He reported to me this week that Asoka was the only plant of all my plans that didn't give him any problems she's such a good girl! Honestly he fell in Love with Genehtiks AK47 Goxuak, so much he insists on being here for the harvest 🤣 He also Flushed her once for me. He used Cyco Platinum "Kleanse" in 5gal of water PH'd to 6.6 to help break up any salts in her medium. (Idk if it was necessary) Stats: Ohahu(not reccomended)4x4 tent 1gal water pitcher Fox farms happy frog soil Optic 8+ LED Durabreeze carbon filter 4" inline fan
Processing
Likes
15
Share
Added a scrog today, plants looking healthy. Ill be looking foward to see how they react being autoflowers. Bat guano also added to the coco as a top layer and mixed in about an inch. Upped the cannaboost and cannazym. Next week probably be adding PK 13/14