Recommended
Likes
Comments
Share
- VEGETATIVA - •Prima settimana• Passati i 7 giorni di germinazione procediamo con il conteggio delle settimane di vegetativa. Le piante reagiscono bene, tenere sotto controllo con analisi visiva le foglie e il terreno, controllare ed essere precisi con il PH dell’acqua a 6.5 (solo dopo abbiamo scoperto l’importanza) inizialmente fino alla 4 settimana di vegetativa non l’abbiamo controllato e infatti più avanti noterete delle piccole carenze, tutto molto risolvibile comunque. Mantenere un’irrigazione costante, solitamente ogni 3/4 giorni circa 2/300 ml. Ovviamente sta a voi capire quanta ne serve, sempre meglio aspettare un giorno in più (foglie cadenti) piuttosto che irrigare troppo spesso (causerebbe problemi maggiori l’irrigazione eccessiva).
Likes
5
Share
@4ako4ako
Follow
Got better at week 8 end. Finally lots of trichomes, buds are gettin denser last couple days. Made a couple of pure water waterings between nutrition. Defoliated hard and seems like this is last time before harvest. Please share any thoughts/tips on better growing this baby👇 Peace🙏
Likes
7
Share
@n1kl24
Follow
Seems i managed to get the three Ladies quite in different stages oxf growth. But looking OK eventhough one plant stretched too much. Smth. I need to control better somehow next time. Beside that it Looks good. Checked the trichomes and the very left plant IS showing Milky while the other two are still clear. So far No Amber to See, so assume i have still two weeks ahead aß i also plan to flush
Likes
6
Share
Likes
161
Share
@Roberts
Follow
GSC Extreme autoflower from ILGM has grown really well. Looking really dense, and smelling great. Full of trichromes. She was a late bloomer, but made up for it when she did. Looks like a heavy yield of some dank buds. The Viparspectra P4000 worked excellent. Thank you ILGM, and Viparspectra. I have a harvest video on my YouTube channel, link on my profile page. 🤜🤛🌱 Thank you grow diaries community for the likes, follows, comments, and subscriptions on my YouTube channel. I greatly appreciate all the support. 🌱🌱 🌱https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
30
Share
week intel: it was the time to prune the cover crops this week i chopped them - no problem all good stresses : just a little E.C stress around 1.4 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 707 ppm - 1.4 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster around 275 ppm - 0.57 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with normal dose of Top-Max + B-52 around 213 ppm - 0.42 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : autos do so so so much better with 20 hours light per day pls dont run autos near femenized 1 of them must get sacrificed
Likes
18
Share
Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the third week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. The excitement continues as our ladies flourish and develop beautifully. Let’s dive into the details! 🌟 Week 7 (Third Week of Flower) Progress: Day 43-45: Bud Development and Light Schedule Change • Auto Fast Pete: Pete is continuing to bulk up, . The aroma is intensifying, and the plant is stretching slightly under the new light schedule. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is showing impressive bud development as well. The change in light schedule hasn’t slowed her down one bit. 🌱✨ Day 46-48: Adjusting to 12/12 Light Schedule • Light Schedule Change: This week, we changed the light schedule to 12/12 due to another autoflower in the tent that wasn’t flipping. We couldn’t take any risks, so now all our plants are on a 12/12 schedule. This adjustment has been seamless, and our ladies are adapting well. 💡🕛 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% • Reservoir Details: • TDS: 400 • Temperature: 18°C • pH: 6.2 Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 49: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s overall health is excellent, with vibrant green leaves and strong stems. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are more defined, and the plant is showing no signs of stress. The foliage is lush, and the buds are dense and sticky. 🌱🌟 🌟 Care Tips: • Light: Adjusted to a 12/12 light schedule to ensure consistent flowering across all plants in the tent. The plants are responding well to the change, with no signs of stress. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. This week, we’re focusing on organic soil nutrition supplemented with regulator and CalMag. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, and early resin production. This strain is living up to its name with a fast and vigorous flowering phase. • Future Expectations: Continued bud swelling and resin production. Anticipate dense, aromatic flowers ready for harvest in the coming weeks. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, and resilience. This strain is showing great promise for a high yield and potent flowers. • Future Expectations: Significant bud growth and increased resin production. This plant is gearing up for a heavy yield. 🌍🌿 Fun Fact: Did you know? 🌿✨ A 12/12 light schedule is typically used to induce flowering in photoperiod plants, but autoflowers can still thrive under this schedule, especially when sharing a space with other plants that need the light cycle adjustment. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 7 marks the third week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress. The buds are developing beautifully, and the plants are thriving under our optimized care regimen, even with the new 12/12 light schedule. Stay tuned for Week 8, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week7Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚
Likes
5
Share
Spider mites are getting worse. Also have to harvest soon cause I start travelling next week and I can’t finish and dry them in time. But the trichomes are almost ready
Likes
9
Share
@Xabii
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
6
Share
Cash Express 03.01.2025 Tag 36 / 11.02.2025 Die 5. Wochen ist erreicht ! Die zwei Pflanzen haben alles gut überstanden, in der Zwischenzeit habe ich die Cash Express in ein größeren Topf gesetz. Nach meiner Beurteilung haben sie eine gesunde Höhe und Breite erreicht, man erkennt gut wo später die Blüten entstehen. Ich nehme gerne Ratschläge von der Community an.
Likes
25
Share
🍼Greenhouse Feeding BioGrow & Bio Bloom ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
5
Share
I moved everything into a corner en but up some foil walls and installed a second light. Now 2 x vs1000 vivosun. Going on 75 % but actually i think i put them tomorrow to 100 %, and move them like 50 cm from the plants. Maybe 53. They are going good i guess? Little small but the new lamp should help out and show a little results. Enter the 5th week!
Likes
16
Share
Changed the setup completely. Moved them into their new home, a 2x2 tent. For weeks 1-4 they will remain under a 150 Watt Mars Hydro LED. Created an automatic dripper system. Goes off twice, once an hr after lights on and another 5 hrs later, each watering lasts 1 minute.
Likes
9
Share
@AustinRon
Follow
2 Week AC3Q - Seedling Ambassador Cartwright by IRIE Genetics (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise  Start of Week 2 - 16 July 2022 AC3Q 15:S:2:1 to 22 July 2022 AC3Q 22:S:2:7 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 1.0] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.5, 1.8] ECearlybloom: [ 1.1. 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.9, 1.2] [ 1.2, 1.5] ECflush: [ 0.0, 0.0] - Seedling (Week 1-2) - Temp: 78-82°F - VPD: 0.85 ± 0.05 - Photoperiod: 18/6 - Light Strength Start: 200-300 PPFD - EC: 1.0 FertigationFoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 1.25, ml, 500, ml] FertigationFoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 1.25, ml, 500, ml] FertigationFoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.675, ml, 500, ml] # Cease Begininning Flower Week 5 Rooted Leaf: Primary: # Mix and store for week, not Primer A: [ 2, ml ] Primer B: [ 2, ml ] Silica Skin: [ 1, ml ] # Mix with Base AT Feeding AtFeeding: Root Anchor: [ 1, ml ] # Sprout Lush Green: [ 1, ml ] # at Seedling (3 Nodes) Cal Mag Fuel: [ 1, ml] Sat 16 July 2022 AC3Q 15:S:2:1 - Remaining Plants , 1,3 - 7 (6 Total)    #7 (The Last One) was a potential Lost-Cause - HOWEVER - Her damaged leaflets were praying this morning. It provided sufficient material for Sex Testing.; Sex Testing - [x] Form Filled Out - [x] Clip #3 - [x] Clip #4 - [x] Clip #5 - [x] Clip #6 - [x] Clip #1 - [x] Clip #7 - [x] Package assembled & Mailed (1400) - [x] Install Oscillating Fans (2) - I should have done this LAST WEEK - Wondering why we were growing floppy plants - NEED Light Mechainical (AirFlow) Stimulation to build STRONG MERISTEMS. #6 After Clip  - Mixed up Sat Night/Sunday’s nutes - Full Panel ~ EC: 1.0 Sun 17 July 2022 AC3Q 16:S:2:2 0800: 30 ml full 0.8 EC - Wow - Every time I open the tent after extended close - I’m arrested by the Size change in the leaves. Right now - I see hybrid Vigor! - Installed supports for two leaners, should be ready to come off Wed/Thus ec 0.3 0.4 ml a 0.4 EC + 0.1 0.4 ml b 0.7 EC + -.3 0.2 si 0.7 EC + 0.0 0.2 cm 0.8 EC + 0.1 0.2 lg 0.8 EC + 0.0 2130: 20 Ml Full 0.8 EC - [x] Add Fans to Cabinet for plant strength - [x] Removed supports from 1 & 4 (Flopping Meristem) - Took 6 hours w/ fan for them to stand up! Mon 18 July 2022 AC3Q 17:S:2:3 0900 - 30 Ml Full 0.8 EC 2030: Mixed up Fresh Full @ 1.05 ± 0.05 EC 2100: 30 ml Full Fertigation Tue 19 July 2022 AC3Q 18:S:2:4  0800:30 ml Full EC: 0.8 
 - [ ] Mix up 1.05 ± 0.05 EC FULL 2100 Mixed up Full - EC: 1.05 ± 0.05 Raised ppfd Wed 20 July 2022 AC3Q 19:S:2:5 o730 ec 1.0-1.1, 30 ml per adjusted fans Foliar: - lush green - calmat Thu 21 July 2022 AC3Q 20:S:2:6 - Though fixing’ to harvest - she could use a little water (500 ml) w a littl Rooted Leaf Resin Bloom Fri 22 July 2022 AC3Q 21:S:2:7 Foliar: Solar Rain
Processing
Likes
14
Share
Likes
3
Share
@Aut0mac24
Follow
I cut of some of the bigger leaves off as they we're creating a lot of darkness inside the plant.
Likes
179
Share
@StarLorr
Follow
Welcome to my Øpium diary. In this diary: Seeds: sponsored by Ðivine Șeeds Media: Promix HP Nutrients: Advanced Nutrients, Diablo Nutrients, Gaia Green Power Bloom. Light and Weather: Şun☀️and Mother Earth.🌎 ___________________________ Feeding: Wednesday, Thursday rain🌧️ Fri 23Aug: 4L nutrients pH'd 6.5 Sat 24Aug: 4L water not pH'd Sun 25Aug: 4L water not pH'd ___________________________ *please note that most watering are from top now since topping with Gaia Green Power Bloom*...... and since i smashed the saucers with the weed wacker🤦🏻‍♂️ ______________________________ Øpi is on autopilot. After 4 days straight of rain and colder days(she got purple fan leaves😜), nice weather came back for the weekend! Yay!!☀️ _______________________________ Top dressing her with Gaia Green Power Bloom was and is still a smart move as the sugar leaves got a nice green colour. ______________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Processing
Likes
28
Share
@TrueNorth
Follow
-Strain: Purple Lemonade - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T6 Inline Duct Fan WECLOME BACK GROWMIES! Week 12 here with our PURPLE LEMONADE by Fast Buds! February, 09, 2020 (DAY 78) - YOO GROWMIES! Welcome to week 12 of our PURPLE LEMONADE! week 6 of flower to be exact! she is just thickening right out, i cant believe my eyes daily. she is just exploding even when i think it wont anymore. and to think there are still 2 weeks or so left..... she is still a thirsty and hungry one. she has about 5L with food every other day lol. The smell is such a sweet citrus, i love when i touch it by accident and i get SLAPPED with that wonderful smell. The nugs have hues of purple nothing to crazy though! February 12, 2020 (DAY 81) - WHAT UPPPPP!!!! here we are folks another update. think she is getting flushed starting this weekend. this will be the last feed then its onto that FLAWLESS FINISH by ADVANCED NUTRIENTS. hopefully im making the right choice......maybe another week wouldnt hurt....
Likes
18
Share
@CANNASIM
Follow
Buds are forming nicely, the Hulkberry has a sugary scent, very pleasant looks like very green weed, vibrant. Leafs are showing some cal mag deficiency, I’m using RO water, but supplementing with cal mag, and leafs still demonstrating that for a wile, could be the led to cloase, checked the runoff ec 1.4 and ph 6.5 looks normal, tested the soilless, is between 6.5 and 7. This looks like a more fragile strain, wile by the side i have a heavy feeder, and a normal feeder, runing three distinct diets is out of question at this point... The Purpple kush smells like candy and is really purpple and the unknown strain is like mint with a strong indica look. I’m going to be away for 7days so I intalled a drip sistem and I’m hopping it does the trick...